JBL Stage 250WL Manual de Usario

JBL Vocero Stage 250WL

Lee a continuación 📖 el manual en español para JBL Stage 250WL (12 páginas) en la categoría Vocero. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/12
Stage 2 Architectural Loudspeakers
Installation Guide
1.2 | 20221128
©2022 Harman International
Stage 2 Architectural Loudspeakers Installation Guide | ©2022 Harman International Pg 2
Overview
Supported Products
The following products are supported within this document.
In-Wall Models
Stage 250WL 2-way Dual 5.25" In-Wall
Stage 260W 2-way 6.25" In-Wall
Stage 280W 2-way 8" In-Wall
In-Ceiling Models
Stage 260C 2-way 6.25" In-Ceiling
Stage 260CDT 2-way 6.25" Dual Tweeter In-Ceiling
Stage 260CSA 2-way 6.25" Angled In-Ceiling
Stage 280C 2-way 8" In-Ceiling
Stage 280CSA 2-way 8" Angled In-Ceiling
Associated Accessories
There are several accessories available for new construction
installations as well as square grille kits to change the
appearance of the in-ceiling speakers.
Preconstruction Brackets
WB81 Pre-Construction Bracket for 8" In-Wall
WB61 Pre-Construction Bracket for 6" In-Wall
CB6SA Pre-Construction Bracket for 6"
Angled In-Ceiling
CB8SA Pre-Construction Bracket for 8"
Angled In-Ceiling
Square Grille Kits
SGK6 Square Grille Kit for 6" In-Ceiling
SGK8 Square Grille Kit for 8" In-Ceiling
Box Contents
1x Stage Architectural Loudspeaker
1x Zero Bezel Grille
1x Cutout Template
1x Quick Start Guide (This Document)
Stage 2 Architectural Loudspeakers Installation Guide | ©2022 Harman International Pg 3
Safety Warnings
IMPORTANT! HARMAN International assumes no
responsibility for improper installation of hardware or for
any personal injuries or product damages resulting from
improper installation or a fallen loudspeaker.
Read through this document in its entirety and heed all
warning before proceeding with the installation of these
product(s).
IMPORTANT! Installation Precautions
Due to the nature of this product, there are several
precautions to follow before installation can begin.
1. Allowsu󰀩cientclearancebetweenthespeakerandany
insulation that may be in the wall cavity to avoid ignition
should overheating occur.
1" (26mm) for Non-Flammable Materials
3" (78mm) for Flammable Materials
2. Ensure that all wire run inside of walls and ceiling meets
orexceedslocalrecodesforhiddenwiring.
3. Determine wire lengths and select the proper gauge
speaker wire to use based on the table under Wire Gauge
by Distance.
4. Do NOT overtighten the dog legs when securing the
speaker to surfaces as this may cause the speaker to
come loose. If using a power screwdriver set it to the
lowest settings.
5. Do NOTconnectthespeakerstoanamplierrated
abovetherecommendedamplierpower.Overdrivingthe
speaker can cause an overheating condition increasing
the risk of injury.
6. Do NOTconnecttheamplierendofthewireuntilall
speakers are wired and installed.
7. Determine and purchase any accessories such as pre-
construction brackets before beginning the installation
process. Refer to Associated Accessories for a list of
available brackets.
8. Ensure that wall and ceiling board material is between ½"
(13mm) and 2" (51mm) thick and capable of supporting
the weight of the speaker.

Especificaciones del producto

Marca: JBL
Categoría: Vocero
Modelo: Stage 250WL
Peso.: 109 g
Profundidad: 62.2 mm
Altura: 39.7 mm
Certificados de sostenibilidad: RoHS
Cantidad por paquete: 90 stuk(s)
Voltaje de entrada: 90 - 264 V
Potencia de salida: 12 W
Corriente de salida: 0.8 A
Abarcando: 15 V

¿Necesitas ayuda?

Si necesitas ayuda con JBL Stage 250WL haz una pregunta a continuación y otros usuarios te responderán




Vocero JBL Manuales

Vocero Manuales

Últimos Vocero Manuales