JL Audio MX770-CCX Manual de Usario

JL Audio Vocero MX770-CCX

Lee a continuación 📖 el manual en español para JL Audio MX770-CCX (8 páginas) en la categoría Vocero. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
owner’s manual
Cockpit Coaxial Speaker Systems
MX650-CCX / MX770-CCX
Thank you for purchasing a JL Audio Marine Coaxial Speaker System.
With proper installation, your new speakers will deliver
years of listening pleasure.
We strongly recommend that you have your new marine speakers
installed by your authorized JL Audio dealer.
The installation professionals employed by your dealer have
the necessary tools and experience to properly install your new speakers.
If you prefer to perform your own installation,
please read this instruction manual completely before
beginning the process.
2 | JL Audio - MX650-CCX / MX770-CCX Owners Manual
A
B
F
D
C
E
Physical Specifications MX650-CCX MX770-CCX
Nominal Diameter 6.5 in. / 165 mm 7.7 in. / 196 mm
Grille Outer Diameter (A) 6.90 in. / 175 mm 7.7 in. / 196 mm
Bolt Hole Circle (B) 6.125 in. / 156 mm 6.92 in. / 176 mm
Motor Overmold Outer Diameter (C) 3.85 in. / 98 mm 4.27 in. / 108 mm
Frontal Grille Protrusion* (D) 0.97 in. / 25 mm 1.00 in. / 25 mm
Mounting Hole Diameter (E) 5.00 - 5.25 in. / 127-133 6.25 in. / 159 mm mm
Mounting Depth (F) 2.74 in. / 70 mm 3.15 in. / 80 mm
Notes: *Frontal grille protrusion measured from mounting surface
Specifications MX650-CCX MX770-CCX
Mounting Application Cockpit (Infinite Baffle) Cockpit (Infinite Baffle)
Continuous Power Handling
(RMS Method) 60 Watts / channel 70 Watts / channel
Frequency Response 55 Hz - 25 KHz (± 3 dB) 45 Hz - 25 KHz (± 3 dB)
Efficiency @ 1W/1m 89.0 dB 90.5 dB
Nominal Impedance 4 ohms 4 ohms
MARINE SPEAKER SPECIFICATIONS
Woofers: Injection-molded, mica-filled polypropylene
cone bodies with UV inhibitors, 1.00-inch (25 mm) voice
coils on MX650-CCX and 1.27-inch (32 mm) voice coils
on MX770-CCX, low-profile/ progressive-roll spiders
and synthetic rubber surrounds. DMA-optimized, long
excursion design for enhanced output and bass response.
UV-resistant polymer baskets and grilles
Tweeters: 0.75-inch (19 mm) treated silk dome tweeter,
neodymium magnet, ferrofluid cooled
and damped.
Crossover Networks: Natural woofer roll-off
with 2nd order high-pass circuits. Polyswitch
solid-state tweeter protection
Due to ongoing product development, all specifications are subject to
change without notice.
Included Components and Parts:
• Two Coaxial Speaker Systems
Two Polymer Woofer Grilles (attached to speaker)
Two 0.75-inch (19 mm) Tweeters (mounted to grilles)
Two 2nd order high-pass filters (mounted to grilles)
Eight #8 x 1 3/8-inch (35 mm) phillips-head stainless-
steel screws for speaker mounting
Eight #8 stainless-steel washers for speaker mounting
• Mounting Template
3
CCX anD tCX moDels...
wHat Is tHe DIFFerenCe?
CCX models have woofers specifically designed
for infinite-baffle applications. In plain english,
this means that they are designed to operate
without an enclosure behind them. The bass
response of the speaker will suffer significantly if
placed in a small enclosure.
TCX models are specifically engineered for
enclosed operation. This makes them ideal
for wakeboard tower systems or other small
enclosure applications.
Do not attempt to remove the tweeter from
the grille or the grille from the speaker!
The tweeter is permanently fixed to the grille
and its wiring is permanently attached to the
speaker frame. Attempting to remove the grille
or the tweeter will damage the speaker and this
damage will not be covered under warranty.

Especificaciones del producto

Marca: JL Audio
Categoría: Vocero
Modelo: MX770-CCX

¿Necesitas ayuda?

Si necesitas ayuda con JL Audio MX770-CCX haz una pregunta a continuación y otros usuarios te responderán




Vocero JL Audio Manuales

Vocero Manuales

Últimos Vocero Manuales