JL Audio Stealthbox SB-HY-VELOSTR/10TW3 Manual de Usario

JL Audio No categorizado Stealthbox SB-HY-VELOSTR/10TW3

Lee a continuación 📖 el manual en español para JL Audio Stealthbox SB-HY-VELOSTR/10TW3 (7 páginas) en la categoría No categorizado. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/7

I N S T A L L A T I O N G U I D E

for the

SB-HY-VELOSTR/10TW3

SKU# 94570

2011-2018 Hyundai Veloster

Thank you for choosing a JL Audio Stealthbox® for your automotive sound system.

With proper installation, your new vehicle-specific enclosed subwoofer system

will deliver years of listening pleasure.

We strongly recommend that you have your new Stealthbox® installed by your authorized

JL Audio dealer. The installation professionals employed by your dealer have the necessary tools

and experience to disassemble and reassemble your vehicle properly. If you prefer to perform your

own installation, please read this installation guide completely before beginning the process.

If you choose to perform the installation yourself, it is absolutely vital that

the Stealthbox ® be properly mounted to the vehicle according to these

instructions. Failure to mount the enclosure properly presents two problems:

1) The sub-bass performance will suffer due to the movement of the enclosure

caused by the force exerted by the woofer(s).

2) A loose enclosure presents a serious safety hazard in the event of a collision

or sudden deceleration.

Continued on Next Page

SB-HY-VELOSTR/10TW3 INSTR_SKU# 011355

INSTALLATION

D I F F I C U L T Y :

OUT

ESTIMATED TIME:

23 HOURS

S P E C I F I C A T I O N S

Enclosure Type: Sealed

Driver Type: 10TW3-D4

Nominal Impedance: 2 ohms

Continuous Power Handling: 400 watts (RMS method)

I N C L U D E D H A R D W A R E

(2) 3/8 - 16 x 2-1/2” Bolt

(9) 3/8” Fender Washer

(4) 3/8” Flat Washer

(4) 3/8” Lock Washer

(6) 3/8 - 16 Hex Nut

SB-HY-VELOSTR/10TW3 INSTR_SKU# 011355

P O W E R R E C O M M E N D A T I O N

JL Audio recommends high quality ampliers such as the JL Audio XD300/1v2. The diagram below shows the recommended crossover settings for the XD300/1v2. For a detailed description of the amplier settings,

consult the owner’s manual for the amplier. If another amplier is being used, please reference this illustration and use similar settings on that amplier.

C O N N E C T I O N S

Using quality power, signal, and speaker wire is essential in ensuring the performance of your Stealthbox®. JL Audio recommends using a 4 AWG power kit such as the XD-PCS4-1B for your Stealthbox® amplier. Other kits

are available should you be using more than one amplier. Signal wire such as the JL Audio Premium Audio Interconnect Cables should be used to provide signal for both channels of the amplier. JL Audio

recommends using 12AWG speaker wire for subwoofers.

Continued on Next Page Page 2 • JL Audio, Inc., 2019

Continued on Next Page

SB-HY-VELOSTR/10TW3 INSTR_SKU# 011355

Page 3 • JL Audio, Inc., 2019

S T E P 4

Carefully unclip and remove the hatch sill panel.

S T E P 8

Carefully unclip the front of the rear seat cushion, and

remove the cushion.

S T E P 3

Unclip the cover on the passenger side rear seat back latch.

S T E P 7

Remove the bolts at the back of the rear seat cushion.

S T E P 2

Fold the rear seat back forward and remove the trunk floor.

S T E P 6

Remove the screws that hold the passenger side panel to

the floor.

S T E P 1

Empty the cargo area of the vehicle.

S T E P 5

Remove the screw that holds the rear of the passenger side

panel in place.

Especificaciones del producto

Marca:	JL Audio
Categoría:	No categorizado
Modelo:	Stealthbox SB-HY-VELOSTR/10TW3
Color del producto:	Black, Red, White
Peso.:	119 g
Ancho:	39.8 mm
Profundidad:	52.8 mm
Altura:	38.2 mm
Manual de usuario:	Ja
ventilador incorporado:	Ja
Uso correcto:	Truck, Truggy
Cantidad por paquete:	1 stuk(s)
Compatibilidad de marca:	Alle merken
Funciones de seguridad:	Dust resistant, Splash proof, Water resistant
Protección de voltaje de energía:	Low voltage cut-off, Over current, Overheating, Throttle signal loss
Tecnologías de batería compatibles:	Lithium-Polymeer (LiPo)
Corriente continua máxima:	120 A
Flujo continuo:	Ja
Tipo-producto:	ESC
Tipo de motor:	Borstelloze motor zonder sensor
Plato:	1:10
Corriente continua del circuito laminador de batería (BEC):	5 A
Número máximo de celdas de batería compatible.:	2
Corriente de salida del circuito del laminador de batería (BEC):	6 V, 7.4 V
Protección térmica:	Ja
Soporte de programación ESC:	Ja
Corriente de rango máximo:	760 A
Cantidad mínima de celdas de batería compatibles:	4