Joy-it LED-Matrix01 Manual de Usario

Joy-it No categorizado LED-Matrix01

Lee a continuación 📖 el manual en español para Joy-it LED-Matrix01 (11 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/11
MATRIX MODULE & EXPANSION BOARD
Commissioning and Usage of LED-Matrix01 and RB-MatrixCTRL board
Joy-IT powered by Simac GmbH - Pascalstr. 8 - 47506 Neukirchen-Vluyn - www.joy-it.net
1. General information
2. Using the matrix on the GPIO bar
3. Usage of the matrix controller board
4. Installation of the matrix
5. Usage with Python
6. Displaying pictures & videos
7. Usage in own projects
8. Information & take-back obligations
9. Support
CONTENTS
1. GENERAL INFORMATION
Dear costumer,
thank you very much for choosing our product.
In the following, we will introduce you to what has to be observe while
starting up and using this product.
Should you encounter any unexpected problems during use, please do not
hesitate to contact us.
2. USING THE MATRIX ON THE GPIO BAR
A seperate power supply unit is required to use the LED Matrix.
This should be rated at 5V and round about 4A (per LED-Matrix).
Please ensure that the cable diameter is suicient.
First connect the enclosed cable for the power supply to the LED Matrix and
power supply unit.
Up to three matrices can be operated parallel while using the 40-pin GPIO
strip of the Raspberry Pi. Additional matrices can be connected in series to
each matrix. Please make sure to adjust your power supply accordingly.
Therefore use the HUB75 connector contact marked with IN
IN
IN
ININ on the matrix.
Further matrices can be connected in series via the OUT
OUT
OUT
OUTOUT contact.

Especificaciones del producto

Marca: Joy-it
Categoría: No categorizado
Modelo: LED-Matrix01

¿Necesitas ayuda?

Si necesitas ayuda con Joy-it LED-Matrix01 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Joy-it Manuales

No categorizado Manuales

Últimos No categorizado Manuales