Joy-it RB-CASE+12 Manual de Usario

Joy-it No categorizado RB-CASE+12

Lee a continuación 📖 el manual en español para Joy-it RB-CASE+12 (3 páginas) en la categoría No categorizado. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/3
RASPBERRY PI CASE
RB-Case+12
1. GENERAL INFORMATION
Dear customer,
thank you for choosing our product. In the following, we will show you how
to use your product.
Should you encounter any unexpected problems during use, please do not
hesitate to contact us.
This case is perfect for all maker and handicra enthusiasts because it
protects the Raspberry during experiments and test setups.
2. ASSEMBLY
First of all, you should remove the protective lm from both sides gently.
Aer that four synthetic spacers must be pinned and attached with synthetic
nuts.
Now you can put the Raspberry Pi onto the spacers and screw it tight with
four synthetic screws.
3. SUPPORT
If any questions remain open or problems arise aer your purchase, we are
available by email, telephone and ticket support system to answer these.
E-Mail: service@joy-it.net
Ticket-System: http://support.joy-it.net
Telephone: +49 (0)2845 98469 – 66 (10 - 17 o‘clock)
For more information visit our website:
www.joy-it.net
www.joy-it.net
Simac Electronics Handel GmbH
Pascalstr. 8 47506 Neukirchen-Vluyn
Published: 01.08.2019
Finally, screw the brass spacer tight at the bottom and the top.

Especificaciones del producto

Marca: Joy-it
Categoría: No categorizado
Modelo: RB-CASE+12

¿Necesitas ayuda?

Si necesitas ayuda con Joy-it RB-CASE+12 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Joy-it Manuales

No categorizado Manuales

Últimos No categorizado Manuales