Joy-it RB-RGBLED01 Manual de Usario

Joy-it No categorizado RB-RGBLED01

Lee a continuación 📖 el manual en español para Joy-it RB-RGBLED01 (8 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/8

RBRB-

--RGBLED01

RGBLED01

RGBLED01RGBLED01

RGB LED Module for Raspberry PI-

1. GENE

1. GENE1. GENERAL INFORMAT

RAL INFORMAT

RAL INFORMATRAL INFORMATION

ION

IONION

Dear customer, thank you very much for choosing our product.

In following, we will introduce you to what to observe while start-

ing up and using this product.

Should you encounter any unexpected problems during use,

please do not hesitate to contact us.

2. USAGE WITH A RASPBERRY PI

2. USAGE WITH A RASPBERRY PI2. USAGE WITH A RASPBERRY PI

2.1 Installation of the Soware

If you already use the most current Raspbian System on your Rasp-

berry Pi, you can simply skip this step and proceed with Step 1.2.

Please use the program to install the current „Win32 Disk Imager“

Raspbian image on your SD card. You will find the download of it, if

you follow this link.

Choose your device by browsing through your files and save the file

with Write.

2.2 Connecting the module

Attach the module onto the pins 1 to 26 of your Raspberry Pi, like

shown in the picture below.

Make sure, that the RGB LED of the module is showing towards the -

inside.

2. USE WITH A RASPBERRY PI

2. USE WITH A RASPBERRY PI2. USE WITH A RASPBERRY PI

2.3 Preparing the module

Once you have started the system, open the terminal console and

execute the following commands:

sudo apt get update-

sudo apt get install gcc make build essential python- - -

dev git scons swig

sudo nano /etc/modprobe.d/snd- blacklist.conf

Now open the configuration file with :

sudo nano /boot/config.txt

We install the required packages and confirm them with the

key:

For use, the audio output must be deactivated. For this purpo-

se we process the files responsible for this. We open it with the

command:

backlist snd_bcm2835

Add the following line:

Save and exit the file with the key combination:

CTRL + O , ENTER , CTRL + X

CTRL + O , ENTER , CTRL + XCTRL + O , ENTER , CTRL + X

Scroll down the file to the lines:

#dtparam=audio=on

# Enable audio (loads snd_bcm2835)

dtparam=audio=on

Now comment out the bottom line with a hashtag # so that it

looks like this :

Save and exit the file with the key combination:

CTRL + O , ENTER , CTRL + X

CTRL + O , ENTER , CTRL + X CTRL + O , ENTER , CTRL + X

The Raspberry PI must be restarted with the following com-

mand:

sudo reboot

Especificaciones del producto

Marca:	Joy-it
Categoría:	No categorizado
Modelo:	RB-RGBLED01
Color del producto:	Zwart
Ancho del embalaje:	92 mm
Altura del embalaje:	188 mm
Resolución Máxima:	1024 x 768 Pixels
Certificación:	CE, FCC, RoSH
Conexión(es):	2 x DB15 HD F, 1 x- RJ45 F, 2 x 3.5 mm Stereo F
Distancia máxima:	150 m
Vídeo apagado:	2x VGA
Conexión de vídeo:	VGA
Código del Sistema Armonizado (SA):	85176990
Cantidad de puertos de vídeo:	2