Jung BLELS990 Manual de Usario

Jung No categorizado BLELS990

Lee a continuación 📖 el manual en español para Jung BLELS990 (4 páginas) en la categoría No categorizado. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/4

Bluetooth Low Energy radio transmitter

29.03.20221 / 40024003002

Bluetooth Low Energy radio transmitter

Ref.-no.: BLE A 590 .., BLE LS 990 .., BLE .. 2990-L

BLE A 595 .., BLE LS 995 .., BLE .. 2995-L

Operating instructions

1 Safety instructions

Electrical devices may only be mounted and connected by electrically skilled persons.

Serious injuries, re or property damage possible. Please read and follow manual fully.

The radio communication takes place via a non-exclusively available transmission path, and is therefore not

suitable for safety-related applications, such as emergency stop and emergency call.

These instructions are an integral part of the product and must remain with the end customer.

2 Device components

Fig. 1: Device components

(1) Adhesive lm

(2) Holder plate

(3) Frames (not included in delivery)

(4) Radio module

(5) Rockers

(6) Retaining screw

Fig. 2 and g. 3: Transport lock and protective lm

(7) Transport lock for rockers

(8) Protective lm for holder plate

Bluetooth Low Energy radio transmitter

29.03.20222 / 40024003002

3 Function

Intended use

- Smart switch for wireless device control using wireless standard Bluetooth Low Energy (BLE)

- For switching, dimming and controlling individual light scenes

- Mounting on appliance box according to EN 60670-1, screw xing on walls or adhesive xing on smooth, even

surfaces (glass). Adhesive lm included.

Product characteristics

- Battery-free device without external power supply

- Transmitting energy is generated from mechanical energy of actuation (energy harvesting)

- Encrypted transmission with AES-128 (CBC mode) and sequence counter

- Compatible with various wireless Bluetooth systems (up-to-date list on our website)

- Conguration interface: NFC Forum Type 2 Tag (ISO/IEC 14443 Part 2 + 3)

- Automatic range extension (depending on the system) via BT Mesh devices connected to the mains

4 Information for electrically skilled persons

Installation and electrical connection

DANGER

Electrical shock on contact with live parts in the installation environment.

Electrical shocks can be fatal.

Before working on the device, disconnect the power and cover live parts in the area!

Installation location

The radio range in buildings is approx. 10 m without wall penetration.

A wall penetration is not recommended, because it attenuates the radio signal too much.

Fig. 4: Installation location

In that case, the receiver may not be able to receive the signal from the transmitter correctly

Metal parts at the installation site (e.g. metal door frames) or moisture (e.g. in outdoor areas) can also have a

negative e󰀨ect on the radio transmission.

Fitting the device

• Fix holder plate (2) with adhesive lm (1) at the installation location. (see section „Adhesive xing“)

Alternatively, screw the holder plate onto an appliance box or directly onto the wall.

Note marking „Top“.

• Push frame (3) onto holder plate.

• Snap radio module (4) onto holder plate.

arrow on sticker (rear side of radio module) points upwards (or „O“ is up and „I“ is down).

• Optional: Secure the radio module with the enclosed screw (6).

• Snap on rockers (5).

Note marking „Top“.

The transport lock (7) behind the rockers must be removed beforehand. (g. 2)

Bluetooth Low Energy radio transmitter

29.03.20223 / 40024003002

Adhesive xing

Important:

The nal strength of the adhesive is only reached after 24 hours.

• After gluing the holder plate, let the adhesive cure a little.

Important:

The installation location cannot be changed after the adhesive xing.

• To test the range, carry out commissioning before adhesive xing.

Prerequisite:

Surface is dry, clean, stable and even.

Suitable cleaning agents:

water, degreaser, glass cleaner, methylated spirit

Not suitable for cleaning:

Bath or all-purpose cleaner, aggressive detergents

• Remove the protective lm from the back of the adhesive lm (1).

• Stick the adhesive lm aligned on the surface.

Press rmly for about 10 seconds.

• Remove the protective lm (8) for the holder plate (2).

Do not remove the remaining protective lms.

• Stick the holder plate onto the adhesive lm.

5 Operation

Fig. 5: Operation

Operating elements

The radio transmitter is operated either via one rocker (2-channel) or via two rockers (4-channel). There are four

push-buttons (9) under the rockers. The push-buttons are grouped into two channels (A and B). A distinction is made

between two states (I and O) for each channel.

The functions of the rockers (switching, push-button, dimming or blind) are not congured in the factory settings of the

device.

Factory settings/Reset

Restoring factory settings:

• Remove rockers (5) carefully with a suitable tool (e.g. button lever).

• Press all four push-buttons (9) and the activation bar (10) simultaneously for at least 10 seconds. (g. 5)

Factory settings are restored automatically.

The radio transmitter is no longer taught-in.

Rockers are without function.

• Snap rockers on again.

Especificaciones del producto

Marca:	Jung
Categoría:	No categorizado
Modelo:	BLELS990
Colocación del dispositivo:	Vrijstaand
Color del producto:	Wit
Peso.:	61000 g
Ancho:	400 mm
Profundidad:	600 mm
Altura:	850 mm
tipo de cargador:	Bovenbelading
Retraso del inicio:	9 uur
Indicación de tiempo restante:	Ja
Peso del embalaje:	64000 g
Clase de eficiencia energética (antigua):	A+
Consumo de energía de lavado:	1.02 kWu
Consumo de agua por ciclo:	58 l
eraclase:	A
Clase de medicamentos centrífugos.:	A
Velocidad centrífuga ajustable:	Ja
Velocidad máxima de centrifugado:	1400 RPM
Tiempo de ciclo (máx.):	140 min
Número de programas de lavado:	21
Capacidad nominal:	6 kg
Programas-de-lavado:	Hygiene/anti-allergy, Black