Kenwood DPX501BT Manual de Usario

Kenwood receptor DPX501BT

Lee a continuación 📖 el manual en español para Kenwood DPX501BT (94 páginas) en la categoría receptor. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/94
Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best performance from your new Dual Din Sized CD
Receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below.
Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product.
Model DPX791BH / DPX501BT
Serial number
US Residents Only
Register Online
Register your Kenwood product at www.Kenwoodusa.com
B5A-0344-10 (KN)© 2014 JVC KENWOOD Corporation
DPX791BH
DPX501BT
DUAL DIN SIZED CD RECEIVER
INSTRUCTION MANUAL
RECEPTEUR CD FORMAT DUAL DIN
MODE D’EMPLOI
RECEPTOR DUAL DE CD TAMAÑO DIN
MANUAL DE INSTRUCCIONES
i
FCC WARNING
This equipment may generate or use radio frequency energy. Changes or modifications
to this equipment may cause harmful interference unless the modifications are expressly
approved in the instruction manual. The user could lose the authority to operate this
equipment if an unauthorized change or modification is made.
FCC NOTE
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment may
cause harmful interference to radio communications, if it is not installed and used in
accordance with the instructions. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
Información acerca de la eliminación de equipos eléctricos y electrónicos al final
la vida útil (aplicable a los países que hayan adoptado sistemas independientes de
recogida de residuos)
Los productos con el símbolo de un contenedor con ruedas tachado
podrán ser desechados como residuos domésticos. Los equipos eléc
electrónicos al final de la vida útil, deberán ser reciclados en instala
que puedan dar el tratamiento adecuado a estos productos y a sus
subproductos residuales correspondientes. Póngase en contacto con
administración local para obtener información sobre el punto de rec
más cercano. Un tratamiento correcto del reciclaje y la eliminación
residuos ayuda a conservar los recursos y evita al mismo tiempo efe
perjudiciales en la salud y el medio ambiente.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
In compliance with Federal Regulations, following are reproductions of labels on, or inside
the product relating to laser product safety.
JVC KENWOOD Corporation
2967-3, ISHIKAWA-MACHI,
HACHIOJI-SHI, TOKYO, JAPAN
THIS PRODUCT COMPLIES WITH DHHS RULES 21CFR
SUBCHAPTER J IN EFFECT AT DATE OF MANUFACTURE.
Location : Top Plate
CALIFORNIA, USA ONLY
This product contains a CR Coin Cell Lithium Battery which contains Perchlor
special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate
Informação sobre a eliminação de pilhas
Este produto não deve ser eliminado como lixo doméstico geral. Devolva a pilh
ao revendedor ou entidade autorizada para que a mesma seja devolvida ao fabri
importador.
A reciclagem e a eliminação de lixo de maneira apropriada ajudarão a conserva
naturais ao mesmo tempo que prevenirão os efeitos prejudicais à nossa saúde e
ambiente.
ii
IC (Industry Canada) Notice
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
The term “IC: ” before the certification/ registration number only signifies that the Industry
Canada technical specification were met.
Note de IC (Industrie Canada)
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils
radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d’en compromettre le fonctionnement.
L’expression “IC:” avant le numéro d’homologation/ enregistrement signifie seulement
que les specifications techniques d’Industrie Canada ont été respectées.
CAUTION
This equipment complies with FCC/IC radiation exposure limits set forth for an
environment and meets the FCC radio frequency (RF) Exposure Guidelines in
to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This eq
low levels of RF energy that it deemed to comply without maximum permissive
evaluation (MPE). But it is desirable that it should be installed and operated ke
radiator at least 20cm or more away from person’s body (excluding extremities
wrists, feet and ankles).
Under Industry Canada regulations, this radio transmitter may only operate usin
antenna of a type and maximum (or lesser) gain approved for the transmitter by
Canada. To reduce potential radio interference to other users, the antenna type a
should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is
than that necessary for successful communication.
ATTENTION
Cet équipement est conforme aux limites d’exposition aux rayonnements énonc
pour un environnement non contrôlé et respecte les règles d’exposition aux fréq
radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF t
est considérée conforme sans évaluation de l’exposition maximale autorisée. C
cet équipement doit être installé et utilisé en gardant une distance de 20 cm ou p
le dispositif rayonnant et le corps (à l’exception des extrémités : mains, poignet
chevilles).
Conformément à la réglementation d’Industrie Canada, le présent émetteur radi
fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) app
pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brou
radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’anten
gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dépass
l’intensité nécessaire à l’établissement d’une communication satisfaisante.
Para cumplimiento de la COFETEL:
“La operación de este equipo está sujeta a las siguientes dos condiciones:
(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda
causar su operación no deseada”

Especificaciones del producto

Marca: Kenwood
Categoría: receptor
Modelo: DPX501BT

¿Necesitas ayuda?

Si necesitas ayuda con Kenwood DPX501BT haz una pregunta a continuación y otros usuarios te responderán




receptor Kenwood Manuales

receptor Manuales

Últimos receptor Manuales