Kicker KMA300.4 Manual de Usario

Kicker receptor KMA300.4

Lee a continuación 📖 el manual en español para Kicker KMA300.4 (11 páginas) en la categoría receptor. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/11

KMA150.2

KMA300.4

KMA450.6

Manual del Propietario | Español

AMPLIFICADOR DEL LA SERIE KMA

Benutzerhandbuch | Deutsch

MONOVERSTÄRKER DER KMA-SERIE

Manuel d’utilisation | Française

AMPLIFICATEUR DE SÉRIE KMA

KMA

AMPLIFIERS

Owner’s Manual

KMA MULTI-CHANNEL SERIES AMPLIFIERS

OWNER’S MANUAL

INSTALLATION

Mounting: Choose a dry, structurally sound location to mount your KICKER ampliﬁ er. Make sure there

are no items behind the area where the screws will be driven. Choose a location that allows at least 4”

(10cm) of open ventilation for the ampliﬁ er. Drill four holes using a 7/64” (3mm) bit and use the supplied

#8 screws to mount the ampliﬁ er.

Wiring: The KMA ampliﬁ er’s RCA inputs will receive either high or low level signals from your car stereo’s

source unit. A high-level signal can be run from the source unit’s speaker outputs to the stereo RCA input

on the end panel of the ampliﬁ er using the KICKER KISL as shown (see page 3). Alternatively, the signal

can be delivered to the ampliﬁ er using the low-level RCA outputs on the source unit. Keep the audio

signal cable away from factory wiring harnesses and other power wiring. If you need to cross this wiring,

cross it at a 90 degree angle.

PERFORMANCE

MODEL: KMA150.2 | KMA300.4 | KMA450.6

IMPORTANT SAFETY WARNING

PROLONGED CONTINUOUS OPERATION OF AN AMPLIFIER, SPEAKER, OR SUBWOOFER IN

A DISTORTED, CLIPPED OR OVER-POWERED MANNER CAN CAUSE YOUR AUDIO SYSTEM

TO OVERHEAT, POSSIBLY CATCHING FIRE AND RESULTING IN SERIOUS DAMAGE TO YOUR

COMPONENTS AND/OR VEHICLE. AMPLIFIERS REQUIRE UP TO 4 INCHES (10CM) OPEN

VENTILATION. SUBWOOFERS SHOULD BE MOUNTED WITH AT LEAST 1 INCH (2.5CM) CLEARANCE

BETWEEN THE FRONT OF THE SPEAKER AND ANY SURFACE.

Model: KMA150.2 KMA300.4 KMA450.6

RMS Power

@ 14.4V, 4Ω stereo, ≤ 1% THD+N

@ 14.4V, 2Ω stereo, ≤ 1% THD+N

@ 14.4V, 4Ω mono, ≤ 1% THD+N

40 x 2

75 x 2

150 x 1

40 x 4

75 x 4

150 x 2

40 x 6

75 x 6

150 x 3

Length [in, cm] 8-1/16, 20.4 12-7/16, 31.5 13-15/16, 35.3

Height [in, cm] 2-5/16, 5.9 2-5/16, 5.9 2-5/16, 5.9

Width [in, cm] 7-1/8, 18 7-1/8, 18 7-1/8, 18

Remote Level No No Yes

Speciﬁ cations common to all models:

Frequency Response ± 1dB 10Hz-20kHz

Signal-to-noise Ratio >95dB, A-weighted, re: rated power

Input Sensitivity Low: 125mV-5V, High: 250mV-10V

Electronic Crossover Off, Variable HP & LP 50–200Hz, 12dB/octave slope150.2 & 300.4:

450.6: Amps 1 & 2 - Variable HP 0–200Hz, 12dB/octave slope;

Amp 3 - Off, Variable HP & LP 50–200Hz. 12dB/octave slope

KickEQ™ Bass Boost 0-12dB @ 40Hz (450.6 AMP 3)

Install a fuse within 7” (18cm) of the battery and in-line with the power cable connected to your ampliﬁ er.

source unit

high-level speaker

outputs

to ampliﬁ er

shield

–

core conductor KICKER KISL (optional)

from source unit high-

level speaker outputs

to ampliﬁ er

Model External Fuse

(sold separately)

Power/Ground Wire KICKER Wiring Kit

KMA150.2 1 x 40 Ampere 8 Gauge PK8, CK8

KMA300.4 1 x 60 Ampere 4 Gauge PK4, CK4

KMA450.6 1 x 80 Ampere 4 Gauge PK4, CK4

12V

battery

external fuse

remote turn-on (see page 6)

POWER WIRING

ABYC-compliant power terminals

Ampliﬁ er uses 304-stainless steel

screws and conformal coated PCB

for increased weather resistance

aluminum bottom

plate

≤7”

(18cm)

Especificaciones del producto

Marca:	Kicker
Categoría:	receptor
Modelo:	KMA300.4
Color del producto:	Zwart
Diagonal de la pantalla:	26 "
Resolución:	1366 x 768 Pixels
Relación de aspecto original:	16:9
Ángulo de visión, horizontal:	170 °
Ángulo de visión, vertical:	170 °
Relación de contraste típica:	800:1
Brillo:	500 cd/m²
Número de puertos HDMI:	1
Entrada de audio para PC:	Ja
Vídeo de componentes (YPbPr/YCbCr):	1
Altavoces incorporados:	Ja
Energía promedio:	10 W
Número de hablantes:	2
Salidas de auriculares:	1
tipo HD:	HD
Tecnología de visualización:	LCD
Conecta y reproduce:	Ja
Entrada de PC (D-Sub):	Ja
Teletexto:	Ja
Visualización en pantalla (OSD):	Ja
Número de puertos SCART:	1
Número de conexiones AV:	1
Tipo-de-unidad-óptica:	CD, DVD
Formato de reproducción:	(S)VCD, MPEG4, Xvid, MP3, WMA, JPEG, PICTURE-CD
Mando a distancia incluido:	Ja
Tiempo-de-dormir:	Ja