Kicker PSC652 Manual de Usario

Kicker Vocero PSC652

Lee a continuación 📖 el manual en español para Kicker PSC652 (7 páginas) en la categoría Vocero. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/7
PSC65
English Version
Versión Español
Altavoces Coaxiales PS
Deutsche Version
PS Koaxial-Lautsprecher
Version Francaise
Haut-parleurs Coaxiale PS
PS Coaxial Speakers
2
PSC65 COAXIAL SPEAKERS
Owner’s Manual
PERFORMANCE
INSTALLATION
Authorized KICKER Dealer:
Purchase Date:
Serial Number:
Woofer Size | in [mm] 6 1/2 [160]
Tweeter Size | in [mm] 3/4 [20]
Frequency Response | Hz 40–20k
Max Recommended Ampli er Power [Watts] | PEAK/RMS 120W/60W
Sensitivity [SPLo] | dB @ 1W, 1m 92.5
Nominal Impedance [Zn] | ohm (PSC652), (PSC654)
Weight | oz [g] 15.2 [430]
Mounting Hole Diameter | in [mm] 5 1/16 [128]
Mounting Depth | in [mm] 2 [50]
Top Mount Height | in [mm] 1/4 [6.5]
Please refer to your bikes factory service manual for disassembly/installation information. Typically, you
should retain all factory screws, hardware, and grilles when upgrading your bike to a KICKER system. The
KICKER PSC65 is compatible with factory locations using the included gaskets. If you are doing a custom
installation, be careful not to drill into wiring or vehicle mechanisms. You are solely responsible for securely
mounting the speakers. Use the included grilles and screws only when performing a custom installation.
1. Remove your motorcycles instrument panel according to the
manufacturer’s service manual.
Package Contents:
(2) (2) PSC65 Speakers 12” wiring harnesses
(8) (8) M4 x 25mm pan cross head woodscrews M4 speed nuts
(4) (4) 22ga, red crimp-style butt connectors Gaskets
(2) (2) Grilles Kicker badges
WARNING: KICKER products are capable of producing sound levels that can permanently damage your
hearing! Turning up a system to a level that has audible distortion is more damaging to your ears than
listening to an undistorted system at the same volume level. The threshold of pain is always an indicator
that the sound level is too loud and may permanently damage your hearing. Please use common sense
when controlling volume.
3
2. Remove factory speakers.
Remove the screws securing the factory speakers.
Remove the speaker connectors while removing the factory speaker.
NOTE: 2014 Harley Davidson - It is necessary to remove the outer fairing and speaker housings.
3. Install PSC65 in factory location.
Connect the factory speaker connectors to the PSC65 terminals.
Mount the PSC65 to the desired location with the proper gasket and secure using the factory hardware.
Re-install your bikes access panel in the reverse order you disassembled it.
F
E
Honda factory speaker location
Honda gasket
custom install only
Harley gasket

Especificaciones del producto

Marca: Kicker
Categoría: Vocero
Modelo: PSC652

¿Necesitas ayuda?

Si necesitas ayuda con Kicker PSC652 haz una pregunta a continuación y otros usuarios te responderán




Vocero Kicker Manuales

Vocero Manuales

Últimos Vocero Manuales