King LPWA1227-TP-W Manual de Usario

King Calentador LPWA1227-TP-W

Lee a continuación 📖 el manual en español para King LPWA1227-TP-W (2 páginas) en la categoría Calentador. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

INSTALLATION INSTRUCTIONS

SAVE THESE INSTRUCTIONS

OWNERS GUIDE & INSTALLATION INSTRUCTIONS SHOULD BE LEFT WITH HEATER FOR HOME OWNER

KING ELECTRICAL MFG. COMPANY • 9131 10th Ave So. • Seattle, WA 98108 • Ph: 206.762.0400 • Fax: 206.763.7738 • www.king-electric.com

It is recommended to order your unit with or without the thermostat for your particular application. If your unit has ALWAYS

been ordered incorrectly please contact the factory and we can exchange it for the proper unit. Adding a built-in thermostat

after installation is complicated and could result in creating wiring errors and shorting out the unit.

Instructions for wall mount heater with built-in thermostat

It is to verify the electrical power supply is the same voltage as the heater you are installing. extremely important 208, 240,

277 and 120 Volt heaters are not interchangeable. Powering a 208, 240 or 277 Volt unit with 120 Volt supply wires will

reduce the heater's output by approximately 75%. Powering a 120 Volt unit with 208, 240 or 277 Volt supply wires will destroy

the heater and voids all warranties.

NOTICE must: For heaters without built-in thermostats, using remote or wall-mounted thermostats: the power be brought to

the heater rst (not to the wall-mounted or remote thermostat). This is necessary to provide power for the fan to cool down the

element after the thermostat has opened. Use only a single pole line voltage wall thermostat or switch to control this heater.

CAUTION: Open the circuit breaker supplying the heater before attempting installation, maintenance, or repairs. Lock

or tag circuit breaker panel door. Failure to do so could result in serious electrical shock, burns, or possible death.

1. Remove heater contents from carton and check for shipping damage.

2. Remove grille by loosening the four mounting screws along the sides

of the front panel.

3. Detach interior assembly from the wall can by removing the four

screws along each side of the interior panel. Lift and tilt assembly

away from the top of the wall can. Free the bottom edge from the

metal lip inside the wall can. Place the interior assembly in a safe

location until the wall can is mounted.

4. Remove one knockout from the wall can and thread supply wires

through the hole. Use an approved cable connector to prevent wires

from chang. Connect groundwire to green pigtail.

5. Mount heater wall can on wall studs a minimum of 6" from side wall

and 4" from oor, using the holes provided in the sides of the box.

The face of the box should be ush with the nished wall. Installation

of the interior and grille to the wallbox cover an approximate 5/8"

periphery along the outer area of the opening.

6. After wall can is secured interior assembly leads may be attached

to supply wires and interior secured to wall can. The LPW NOTE:

wall heater is equipped with two steel elements having a capacity of

2250 Watts each, for a combined capacity of 4500 Watts. The heater is factory-

wired at 4500 Watts. To adjust the heater for lower wattages remove the appropri

ate colored wire according to the illustration and wattage diagram provided on the

back side of this sheet. Be sure to insulate and secure the unused lead.

7. Reinstall interior assembly on wallbox using screws provided.

8. Mount grille to interior with screws provided.

9. Installation is now complete and the heater ready for use.

LPW2045T, LPWA2045T, LPW2445T, LPWA2445T, LPW2740T, LPWA2740T

240 VOLT MODELS with Disconnect Breaker and Remote User Switch

Maintenance & Warranty

The high quality and superior design of this unit will enable years of maintenance free performance. Once yearly

the heater should be checked for lint or dust accumulation but no further maintenance is required. The motor is

permanently lubricated and sealed. A 5-year warranty is provided on the Pic-A-Watt ® element and 1-year on all

materials, components and workmanship.

VISUAL ALARM

This heater includes a visual alarm to warn that

parts of the heater are getting excessively hot.

If the alarm ashes, immediately turn the heater

o and inspect for any objects on or adjacent to

the heater that may cause high temperatures.

Do not operate the heater with the alarm

ashing.

LPW-As with disconnect.indd : 8/09

FAN-FORCED HEATERS:

Clearances for Safe

Operation

INSTALLATION INSTRUCTIONS

SAVE THESE INSTRUCTIONS

OWNERS GUIDE & INSTALLATION INSTRUCTIONS SHOULD BE LEFT WITH HEATER FOR HOME OWNER

KING ELECTRICAL MFG. COMPANY • 9131 10th Ave So. • Seattle, WA 98108 • Ph: 206.762.0400 • Fax: 206.763.7738 • www.king-electric.com

21¾"

13"

½"

This heater includes a visual alarm to

warn that parts of the heater are getting

excessively hot. If the alarm ashes

immediately turn the heater o and

inspect for any objects on or adjacent

to the heater that may cause high

temperatures. Do not operate the heater

with the alarm ashing.

Safety Light

LPW-As with disconnect.indd : 8/09

2250 • 2750 • 3000 • 3250 • 3750 • 4000 • 4500

WATTAGES AVAILABLE IN ONE UNIT

INSTALLATION INSTRUCTIONS

This heater is shipped from the factory

wired for maximum wattage of 4500

Watts. To reduce the wattage unplug

(disconnect) an insulated push on

terminal and wrap with electrical tape

to prevent the possibility of electrical

contact with other parts.

Field Wattage Selection

A - ORANGE Disconnects 1000 Watts

B - BLUE Disconnects 750 Watts

C - YELLOW Disconnects 500 Watts

D - BLACK Do Not Disconnect (Common)

E - RED Do Not Disconnect

END VIEW OF ELEMENT

SHOWING QUICK CONNECT TERMINALS

A E

DCommon

1000

E C

DCommon

1000

750 500

500

750

LPW2045T, LPWA2045T, LPW2445T,

LPWA2445T, LPW2740T, LPWA2740T

11½"

Insulated Push on

Terminal

BLUE

FAN

DELAY

1000 WATT

500 WATT

RED

YELLOW C

ORANGE

RED

RED E

BLACK #14

750 WATT

500 WATT

750 WATT

LIMIT

RED #14

BLACK #14

BLACK #16BLACK#16

1234

BLACK

ORANGE #14

RED #14

GRAY #16

PURPLE #16

FAN

Insulated Push on

Terminal

knob position .......L1-0, L2-0 OFF

knob position .......L1-2, L2-4 FAN

knob position HEAT......L1-1, L2-4, L2-3

Thermostat

1000 WATT

Rotary Switch

L1 L2

SAFETY

LIGHT

Pic-A-Watt®

Metal Sheath Element

CONNECTIONS

FAN DELAY

1-3 N.C., 1-2 N.C.

1-2 Closes on Temp Rise

BLACK

Breaker

Disconnect

Terminal

Block

Especificaciones del producto

Marca:	King
Categoría:	Calentador
Modelo:	LPWA1227-TP-W
Color del producto:	Zilver
Ancho:	333 mm
Profundidad:	86 mm
Altura:	292 mm
Material de la carcasa:	Metaal
Método de montaje:	Muur
Adecuado para tamaños de pantalla:	26 - 45 "
Capacidad máxima de peso:	34 kg
Bisagra:	Ja
Compatibilidad de la interfaz de montaje (min):	100 x 100 mm
Compatibilidad de la interfaz de montaje (máx.):	200 x 200 mm