Klipsch KL-525-THX Manual de Usario

Klipsch Vocero KL-525-THX

Lee a continuación 📖 el manual en español para Klipsch KL-525-THX (20 páginas) en la categoría Vocero. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/20

THX ULTRA

2 IN-WALL

LOUDSPEAKER

OWNER'S MANUAL

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance

with the manufacturer's instructions.

8. DO NOT install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including amplifiers) that

produce heat.

9. DO NOT defeat the safety purpose of the polarized or grounding

type plug. A polarized plug has two blades with one wider than

the other. A grounding type plug has two blades and a third

grounding prong. The wider blade or the third prong are provided

for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

10. PROTECT the power cord from being walked on or pinched,

particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11. ONLY USE attachments/accessories specified by the

manufacturer.

12. USE only with a cart, stand, tripod, bracket, or table specified

by the manufacturer, or sold with the apparatus. When a cart is

used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when unused

for long periods of time.

14. REFER all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way,

such as power-supply cord or plug is damaged, liquid has been

spilled or objects have fallen into the apparatus, the apparatus

has been exposed to rain or moisture, does not operate

normally, or has been dropped.

This symbol indicates that there are important

operating and maintenance instructions in the

literature accompanying this unit.

This symbol indicates that dangerous voltage

constituting a risk of electric shock is present within

this unit.

To reduce the risk of fire or electrical shock, do not expose this

product to rain or moisture. The product must not be exposed to

dripping and splashing and no object filled with liquids - such as a

vase of flowers - should be placed on the product.

No naked flame sources - such as candles - should be placed on

the product.

WARNING: Voltages in this equipment are hazardous to life.

No user-serviceable parts inside. Refer all servicing to qualified

service personnel.

ABOUT YOUR KLIPSCH PURCHASE

Your new Klipsch THX Ultra2 architectural speakers have been

designed to deliver great sound while remaining unobtrusive

wherever you install them.

The KL-7800-THX is designed for Left, Center or Right channel

use or wherever a monopole speaker is called for, such as

surround back channels in Ultra2 configurations. The result is a

flush-mount speaker that creates a powerful statement in any

application.

The KS-7800-THX features a patent-pending horn array,

consisting of two vertically stacked Tractrix

®Horn-loaded tweet-

ers. It is designed specifically for surround use in home theater

applications. The result is a flush-mount speaker that creates

enveloping ambient sound fields and localizing specific surround

effects through the use of Klipsch’s proprietary Wide Dispersion

Surround Technology (WDST™). The careful alignment of the two

controlled-directivity Tractrix Horn tweeters, angled opposite one

another, yields an incredibly wide dispersion pattern from a

flush-mount design.

Minimum Tools Required for Installation

#2 Phillips Screwdriver

Wire strippers

Level

Stud finder

Saw

In-Wall Speaker Placement (Refer to Figures 1 and 2)

Designed to function in any standard wall, Klipsch THX Ultra2

in-wall speakers are engineered for years of performance.

Minimum construction requirements call for drywall or other

mounting surfaces to be at least 1/2" thick.

To maximize performance, install the KL-7800-THX equally

spaced to either side of the video display. When being used as a

center channel, please locate this speaker as close to the video

display as is practical.

The KS-7800-THX should be installed to either side of the

listening position at an equal distance from the listener whenever

possible. You may also install them behind the listening position

and achieve good results.

THX ULTRA2 ARCHITECTURAL SPEAKERS

English Figure 1

THX Ultra2 7.1 surround systems utilize a surround back channel

in addition to the traditional side surrounds. When configuring

such a system it is suggested to use KL-7800 speakers in the

surround back location.

Speaker Installation (for New Construction, skip to step #3)

1. Cut the appropriate size opening in the wall using the

template provided. If the template is not available, cutout

dimensions are provided on the Klipsch website, at

www.klipsch.com. Sizes listed are minimum. If accuracy of

cut cannot be achieved, you may add 1/4" to each dimension.

Be careful not to cut through any existing wiring or plumbing.

Avoid compromising any fire stops between studs.

2. Run speaker wiring (18 gauge minimum) to the openings. Be

sure to comply with all building codes in your area.

3. Attach the wire to the speaker using the wire’s color coding or

markings as a guide to maintain proper polarity.

4.Insert the speaker assembly into the opening and attach by

tightening the six Phillips screws (see illustration). The frame’s

six “dogs” will swivel out and “sandwich” the wall and frame

together as they are tightened. If you use a power tool to tighten

these screws, please use a low torque setting. Failure to do so

could result in damage to your speaker (Refer to Figure 3)

5. At this point, you may paint the speaker grille before attaching

it to the speaker. Klipsch speakers and grilles are designed to

accept most types of paint. Use the supplied clear paint shield to

protect the speaker baffle and drivers when painting the bezel of

the speaker. Care should be taken to avoid excessive paint build-

up in the grille perforations. Please remove the scrim material

attached to inner surface of the grille by carefully peeling it out

prior to painting. Reinstall scrim after the paint on the grille

is dry.

6. Press the grille into place.

WARRANTY—U.S. AND CANADA ONLY

The Warranty below is valid only for sales to consumers in the

United States or Canada.

KLIPSCH, L.L.C. ("KLIPSCH") warrants this product to be free

from defects in materials and workmanship (subject to the terms

set forth below) for a period of five (5) years from the date of

purchase. During the Warranty period, KLIPSCH will repair or

replace (at KLIPSCH’s option) this product or any defective parts

(excluding electronics and amplifiers). For products that have

electronics or amplifiers, the Warranty on those parts is for a

period of two (2) years from the date of purchase.

To obtain Warranty service, please contact the KLIPSCH

authorized dealer from which you purchased this product. If

your dealer is not equipped to perform the repair of your

KLIPSCH product, it can be returned, freight paid, to KLIPSCH for

repair. Please call KLIPSCH at 1-800-KLIPSCH for instructions.

You will need to ship this product in either its original packaging

or packaging affording an equal degree of protection.

Proof of purchase in the form of a bill of sale or receipted

invoice, which is evidence that this product is within the Warranty

period, must be presented or included to obtain Warranty service.

This Warranty is invalid if (a) the factory-applied serial number

has been altered or removed from this product or (b) this product

was not purchased from a KLIPSCH authorized dealer. You may

call 1-800-KLIPSCH to confirm that you have an unaltered serial

number and/or you purchased from a KLIPSCH authorized dealer.

This Warranty is only valid for the original purchaser and will

automatically terminate prior to expiration (if applicable) if this

product is sold or otherwise transferred to another party.

This Warranty does not cover cosmetic damage or damage due

to misuse, abuse, negligence, acts of God, accident, commercial

use or modification of, or to any part of, the product. This

Warranty does not cover damage due to improper operation,

maintenance or installation, or attempted repair by anyone other

than KLIPSCH or a KLIPSCH dealer which is authorized to do

KLIPSCH warranty work. Any unauthorized repairs will void this

Warranty. This Warranty does not cover product sold AS IS or

WITH ALL FAULTS.

REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS

WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER.

KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR

CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR

IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE

EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE

AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WAR-

Figure 2

Figure 3

Especificaciones del producto

Marca:	Klipsch
Categoría:	Vocero
Modelo:	KL-525-THX
Color del producto:	Roestvrijstaal
Peso.:	2416 g
Ancho:	294 mm
Profundidad:	370 mm
Altura:	155 mm
Mango de color:	Zwart
Diámetro:	2800 mm
Cantidad de embarcaciones:	2
Material:	Roestvrijstaal
Contenido:	- l
Material de la tapa:	Glas
Material-del-mango:	Roestvrijstaal
Horno seguro:	Ja
Grosor del fondo:	6.3 mm