Klipsch RC-7 Manual de Usario

Klipsch Vocero RC-7

Lee a continuación 📖 el manual en español para Klipsch RC-7 (14 páginas) en la categoría Vocero. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/14

REFERENCE

RF-7, RF-5, RC-7, RS-7

SERIES

OWNER’S MANUAL

IMPORTANT SAFETY INSTRUCTIONS

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT use this apparatus near water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in accordance with the manufacturer's instructions.

8. DO NOT install near any heat sources such as radiators, heat registers, stoves, or other

apparatus (including amplifiers) that produce heat.

9. DO NOT defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two

blades with one wider than the other. A grounding type plug has two blades and a third grounding

prong. The wider blade or the third prong are provided for your safety. If the provided plug does not fit

into your outlet, consult an electrician for replacement of the obsolete outlet.

10. PROTECT the power cord from being walked on or pinched, particularly at plugs, convenience

receptacles, and the point where they exit from the apparatus.

11. ONLY USE attachments/accessories specified by the manufacturer.

12. USE only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to

avoid injury from tip-over.

13. UNPLUG this apparatus during lightning storms or when unused for long periods of time.

14. vicing is required when the apparatus hasREFER all servicing to qualified service personnel. Ser

been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does

not operate normally, or has been dropped.

This symbol indicates that there are important operating and maintenance instructions in the literature

accompanying this unit.

This symbol indicates that dangerous voltage constituting a risk of electric shock is present

within this unit.

WARNING: To reduce the risk of fire or electrical shock, do not expose this apparatus

to rain or moisture.

WARNING: Voltages in this equipment are hazardous to life. No user-serviceable parts inside. Refer all

servicing to qualified service personnel.

CAUTION: Changes or modifications not expressly approved by the manufacturer could void the users

authority to operate this device.

POSITIONING YOUR REFERENCE SERIES SPEAKERS

Before You Start — Some Klipsch speakers have feet and other accessories that may need to be

installed prior to use. Please refer to Diagrams 1, 2, and 3 for installation.

FOR MAXIMUM STABILITY AND SAFETY THE INCLUDED OUTRIGGER FEET MUST BE INSTALLED.

Left and Right Main Channel Speakers — For optimum performance, place your speakers six to 15 feet

(2 to 4.5m) apart and at least 24 inches (60.8cm) from the back and side walls. They may also be

toed-in slightly for better stereo imaging. The listening position should be about 1 to 1.5 times the dis-

tance separating the speakers.Refer to Figures 1 and 2 for connection and placement.

Center Channel Speakers — Center channel speakers are designed to place dialogue and primary

sounds so that they appear to come from the video screen. The speakers should therefore be placed as

close to the screen as possible, preferably directly on top of or below the screen. Refer to Figures 2 and

3 for placement.

Rear Surround Channel Speakers — Klipsch WDST™ surround speakers should be placed on the walls

directly adjacent to or on the wall behind the listening position. They are designed to recreate the sense

of space and ambience that many of today’s surround sound technologies provide. Refer to Diagram 4

and Figures 2 for placement.

CONNECTING YOUR REFERENCE SERIES SPEAKERS TO YOUR AMPLIFIER

Conventional Connection — Using 16-gauge or larger speaker wire, connect the RED "positive" (+) ter-

minal of the LEFT speaker to the RED "positive" (+) terminal of your amplifier’s LEFT channel. Connect

the BLACK "negative" (–) terminal of the LEFT speaker to the BLACK "negative" (–) terminal of your

amplifier’s LEFT channel. Repeat this procedure for connecting all remaining speakers to the appropri-

ate amplifier channels. Refer to Figure 4 and 6. Make sure that no bare wires from any of the connec-

tions touch any other terminals as this could cause a short and damage your equipment. Some

Reference models have two sets of input terminals connected by wire jumpers. For conventional con-

nection, leave these jumpers in place, and use either set of terminals.

Bi-wire Connections — Some Reference models have the capability to be bi-wired. These speakers

have two sets of input terminals connected by wire jumpers. Bi-wiring requires using two separate

speaker wires for each speaker. The RED "positive" (+) leads of both LEFT channel wires are tied

together and inserted into the same RED "positive" (+) terminals of the amplifier’s LEFT channel. On the

LEFT speaker, the wire jumpers are removed. One of the two speaker wires is connected to the top set

of terminals (RED to RED and BLACK to BLACK) while the other speaker wire is connected to the lower

set of terminals in the same manner. Refer to Figure 5. Klipsch recommends this method of hook-up for

improved bass response, imaging and detail. For more information on how to bi-wire your speakers, see

your dealer or visit www.klipsch.com.

Amplifier Requirements — Klipsch speakers are highly efficient and will operate easily on a wide variety

of amplifiers. All Klipsch speakers are 8-ohm compatible and can be driven to very high levels with low

distortion. Due to the high output levels Klipsch speakers are capable of reproducing, exercise caution

with the volume control. Excessive volume over long periods can permanently damage your hearing.

Overdriving your amplifier could also damage your speakers. Check with your dealer to make sure your

particular amplifier is best suited to your application. We want you listening for a lifetime.

CARE AND CLEANING OF YOUR REFERENCE SERIES SPEAKERS

Your speakers ha yl or real wood veneer finish thave a durable vin t should only require dry dusting or

cleaning with a damp cloth. Avoid the use of abrasive or solvent-based cleaners and harsh detergents.

The brush attachment of your vacuum or a slightly damp sponge should remove any dust from your

speaker grilles.

WARRANTY—U.S. AND CANADA ONLY

The Warranty below is valid only for sales to consumers in the United States or Canada.

KLIPSCH, L.L.C. ("KLIPSCH") warrants this product to be free from defects in materials and work-

manship (subject to the terms set forth below) for a period of five (5) years from the date of pur-

chase. During the Warranty period, KLIPSCH will repair or replace (at KLIPSCH’s option) this prod-

uct or any defective parts (excluding electronics and amplifiers). For products that have electronics

or amplifiers, the Warranty on those parts is for a

period of two (2) years from the date of purchase.

To obtain Warranty service, please contact the KLIPSCH authorized dealer from which you pur-

chased this product.If your dealer is not equipped to perform the repair of your KLIPSCH product,

it can be returned, freight paid, to

KLIPSCH for repair. Please call KLIPSCH at 1-800-KLIPSCH for instructions. You will need to ship

this product in either its original packaging or packaging affording an equal degree of protection.

Proof of purchase in the form of a bill of sale or receipted invoice, which is evidence that this

product is within the Warranty period, must be presented or included to obtain Warranty service.

This Warranty is invalid if (a) the factory-applied serial number has been altered or removed from

this product or (b) this product was not purchased from a KLIPSCH authorized dealer. You may call

1-800-KLIPSCH to confirm that you have an unaltered serial number and/or you purchased from a

KLIPSCH authorized dealer.

E N G -

RISK OF ELECTRIC SHOCK

DO NOT OPEN

This Warranty is only valid for the original purchaser and will automatically terminate prior to expi-

ration if this product is sold or otherwise transferred to another party.

This Warranty does not cover cosmetic damage or damage due to misuse, abuse, negligence, acts

of God, accident, commercial use or modification of, or to any part of, the product. This Warranty

does not cover damage due to improper operation, maintenance or installation, or attempted repair

by anyone other than KLIPSCH or a KLIPSCH dealer which is authorized to do KLIPSCH warranty

work. Any unauthorized repairs will void this Warranty. This Warranty does not cover product sold

AS IS or WITH ALL FAULTS.

REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS WARRANTY ARE THE EXCLUSIVE REME-

DY OF THE CONSUMER. KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUEN-

TIAL DAMAGES FOR BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.

EXCEPT TO THE EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF

ALL OTHER EXPRESS AND IMPLIED WARRANTIES WHATSOEVER, INCLUDING BUT NOT LIMITED

TO, THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PRACTICAL PURPOSE.

Some states do not allow the exclusion or limitation of incidental or consequential damages or

implied warranties so the above exclusions may not apply to you. This Warranty gives you specific

legal rights, and you may have other rights, which vary from state to state.

WARRANTY OUTSIDE THE UNITED STATES AND CANADA

The warranty on this product if it is sold to a consumer outside of the United States or Canada shall

comply with applicable law and shall be the sole responsibility of the distributor that supplied this prod-

uct. To obtain any applicable warranty service, please contact the dealer from which you purchased this

product, or the distributor that supplied this product.

Especificaciones del producto

Marca:	Klipsch
Categoría:	Vocero
Modelo:	RC-7

¿Necesitas ayuda?

Si necesitas ayuda con Klipsch RC-7 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Vocero Klipsch Manuales

Klipsch R-50M Manual de Usario

5 Octubre 2024

Klipsch Palladium P-38F Manual de Usario

5 Octubre 2024

Klipsch KD-400 Manual de Usario

29 Septiembre 2024

Klipsch Reference R-28PF Manual de Usario

28 Septiembre 2024

Klipsch Reference CDT-2800-C II Manual de Usario

23 Septiembre 2024

Klipsch PRO-18RC Manual de Usario

21 Septiembre 2024

Klipsch R-5650-S II Manual de Usario

21 Septiembre 2024

Klipsch R50-PM Manual de Usario

19 Septiembre 2024

Klipsch The Three II Manual de Usario

18 Septiembre 2024

Klipsch CDT-5800-C Manual de Usario

18 Septiembre 2024

Vocero Manuales

Últimos Vocero Manuales

Continental Edison CELED53HP20V2B4 Manual de Usario

27 Octubre 2024

Canton Vento 830.2 Manual de Usario

27 Octubre 2024

Jamo S7-25C Manual de Usario

27 Octubre 2024

Bowers Wilkins 707 S2 Manual de Usario

27 Octubre 2024

Monacor GLS-301/GR Manual de Usario

27 Octubre 2024

Monitor Audio Silver C150 Manual de Usario

26 Octubre 2024

FBT MITUS 210M Manual de Usario

26 Octubre 2024

CyberData Systems SIP 011398 Manual de Usario

26 Octubre 2024

Lamax PartyGo1 Play Manual de Usario

26 Octubre 2024

IKEA SYMFONISK 405.847.50 Manual de Usario

26 Octubre 2024