Klipsch RSM-650 Manual de Usario

Klipsch Vocero RSM-650

Lee a continuación 📖 el manual en español para Klipsch RSM-650 (6 páginas) en la categoría Vocero. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/6

KLIPSCH RESIDENTIAL SURFACE MOUNT

OUTDOOR LOUDSPEAKERS

RSM-400 | RSM-525 | RSM-650 | RSM-800

OWNER’S MANUAL

OWNER’S

MANUAL

1. READ these instructions.

2. KEEP these instructions.

3. HEED all warnings.

4. FOLLOW all instructions.

5. DO NOT submerse apparatus beneath water.

6. CLEAN ONLY with dry cloth.

7. DO NOT block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8. DO NOT install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. ONLY USE attachments/accessories specified by the manufacturer.

10. USE only with a bracket specified by the

manufacturer, or sold with the apparatus.

11. REFER all servicing to qualified service personnel. Servicing is required

when the apparatus has been damaged in any way, such as power-

supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

The exclamation point, within an equilateral triangle, is

intended to alert the user to the presence of important

operating and maintenance (servicing) instructions

in the literature accompanying the product.

The lightning flash with arrowhead symbol within an

equilateral triangle is intended to alert the user to the

presence of uninsulated “dangerous voltage” within the

product’s enclosure that may be of sufficient magnitude

to constitute a risk of electrical shock to persons.

WARNING: No naked flame sources – such as

candles – should be placed on the product.

WARNING: Voltages in this equipment are hazardous

to life. No user-serviceable parts inside. Refer all

servicing to qualified service personnel.

CAUTION: Changes or modifications not expressly approved by the

manufacturer could void the user’s authority to operate this device.

ABOUT YOUR KLIPSCH PURCHASE

Thank you for your purchase of Klipsch outdoor loudspeakers. After

reading this manual and connecting your system, you will hear the

result of over 75 years of stringent engineering and class-leading

research and development. Like all Klipsch products, your outdoor

loudspeakers feature Klipsch Horn-loaded Technology—the guiding

design for the first Klipschorn® developed in 1946 and for every

product that has followed. Horn-loading allows your speakers to

deliver high sensitivity, low distortion, flat frequency response and

controlled dispersion, which translates to unequaled power, detail

and dynamics, the hallmarks of “The Klipsch Sound.” Please be sure

to register online at www.klipsch.com/register so we are better

able to serve you. Again, thank you for choosing Klipsch and we

hope that your speakers bring life to your music for many years.

KLIPSCH RESIDENTIAL SURFACE

MOUNT LOUDSPEAKERS

(RSM-400, RSM-525, RSM-650, RSM-800)

The Klipsch Residential Surface Mount loudspeakers are a coaxial

design, excluding the RSM-400. using a high performance bass

driver for the low frequencies. Tractrix Hyperfold Ports with a 5

stage folded horn included in each port are used to improve sound

dispersion, allowing the speaker system to radiate sound waves

more evenly in all directions. A 1” Titanium dome, compression driver

mounted to round, modified tractrix horn, with mumps (patented),

provides 105 degrees of coverage for clean and efficient reproduction

of the high and midrange frequencies. The RSM-400 is a two way

with a 3/4” dome compression driver mounted to a tractrix horn.

Klipsch Residential Surface Mount loudspeakers are constructed

from UV-resistant material and are remarkably durable against

the elements. With an IPX6 rating while mounted horizontal

with a 20 degree down angle, they are highly water resistant.

They can be painted to match any trim or siding color.

PLACEMENT

The Residential Surface Mount models are perfect for patios, decks,

swimming pools, porches or any other place where exposure to

the elements makes conventional loudspeaker usage unsuitable.

(RSM-400, RSM-525, RSM-650, RSM-800)

To achieve the best performance from your speakers, place the

pair on the same wall facing the listening area and space them

six to fifteen feet apart. For a higher quality stereo image, angle

down, or toe in, the speakers toward the primary listening area.

This is especially important in installations that place the speakers

well above ear level. Some additional bass will result if you place

the speakers in a corner or near a wall. This provides greater bass

coupling due to the additional reflected energy from the walls.

WALL MOUNTING

Please consult your dealer, custom installer or building contractor

in before installation. Included with your speakers are ”C”

style mounting brackets constructed of weather-resistant,

powder-coated zinc. These brackets attach to the speaker

with the supplied low profile knobs that thread onto the top

and bottom studs protruding from the cabinet. This allows

the speaker to be angled to the left or right when mounted

vertically, or up and down when mounted horizontally.

After determining the desired location and orientation of your

speakers, remove the bracket from the loudspeaker and use it as

a template to mark the location of the mounting holes. Check the

alignment of the holes with a torpedo level before drilling the pilot

IMPORTANT SAFETY INSTRUCTIONS

hole. Use #10-12 2.5” – 3” long pan head screws to attach the bracket

into a wall stud. Affix the speaker to the bracket with the supplied

knobs. Be sure to leave enough clearance between the end of the

bracket and any adjacent wall or ceiling for installation of the knobs.

If a wall stud is not available, use the appropriate type of

drywall or masonry anchor to support the weight of the

speaker, allowing for a generous safety margin.

You may also use an optional wall or ceiling mount that will

fit the provided 3/8” – 16 inserts. Please see your authorized

Klipsch dealer to see which model is right for you.

CONNECTIONS

When making any type of speaker wire connection, be sure to observe

proper polarity. Most speaker wire and connectors are color-coded.

Typically, red is positive (+) and black is negative (–), or ground. It

does not matter which wire conductor is connected to the positive or

negative connection of your equipment as long as it is consistent.

Pull the two conductors apart for about an inch and strip

approximately 1/4-inch of insulation from the end of each. (A wire

stripper will simplify this, but you can use an ordinary pocket

knife to cut around and through the insulation down to the wire.)

Twist the strands of wire on each individual conductor tightly

together. Push in the spring-loaded speaker terminal and insert

the corresponding wire. Release the terminal and the wire will

be securely held in place. Make sure that no strands of wire are

touching from one binding post to the other or to any strands from

the other conductor. Failure to observe this precaution at either end

of the connection can result in amplifier malfunction or damage.

OTHER TYPES OF SPECIALTY CONNECTORS ARE AVAILABLE TO FACILITATE

HOOKING UP YOUR SPEAKERS. PLEASE CONSULT YOUR AUTHORIZED

KLIPSCH DEALER FOR SUGGESTIONS AND FURTHER DETAILS.

SPEAKERS TO AMPLIFIER

(RSM-400, RSM-525, RSM-650, RSM-800)

One of the most important things about hooking up your speakers

is keeping them in the same polarity, or phase. If they are

connected out of phase, bass and sound imaging will be degraded.

The easiest way to ensure that your speakers are wired in phase

is to always connect the positive and negative output terminals

on your amplifier or receiver to the matching input terminals on

your speakers: positive (“+”, color-coded red) to positive and

negative (“–”, color-coded black) to negative. (See Figure 1.)

PAINTING

The grille and cabinet of your speakers may be painted. For

best results, lightly sand all surfaces to be painted (cabinet and

grille) with 300-400 grit sandpaper. Wash these surfaces with

a moistened cloth dipped into a mild detergent to remove any

fingerprints or grease. Allow speaker to dry before painting.

Care must be taken to mask off the front of the speaker to protect

the tweeter, woofer and front panel from overspray. This will

maintain the existing uniform dark color behind the grille and protect

the woofer and tweeter from being damaged by the paint. Affix

masking tape to the inboard wall of the grille groove and attach

plastic or newspaper to the tape to cover the entire front panel

of the speaker. Also before painting, mask the speaker wire push

terminals on the rear of the cabinet to preserve their conductivity.

Remove the grill set screws, grille and speaker terminal cover

before painting. For best results, use several light coats of

paint instead of one heavy coat. This will help prevent the

perforations in the grille from becoming clogged with paint.

Figure 1

Especificaciones del producto

Marca:	Klipsch
Categoría:	Vocero
Modelo:	RSM-650

¿Necesitas ayuda?

Si necesitas ayuda con Klipsch RSM-650 haz una pregunta a continuación y otros usuarios te responderán

Tu nombre*

Tu correo electrónico*

Escribe tu pregunta aquí

Vocero Klipsch Manuales

Klipsch R-50M Manual de Usario

5 Octubre 2024

Klipsch Palladium P-38F Manual de Usario

5 Octubre 2024

Klipsch KD-400 Manual de Usario

29 Septiembre 2024

Klipsch Reference R-28PF Manual de Usario

28 Septiembre 2024

Klipsch Reference CDT-2800-C II Manual de Usario

23 Septiembre 2024

Klipsch PRO-18RC Manual de Usario

21 Septiembre 2024

Klipsch R-5650-S II Manual de Usario

21 Septiembre 2024

Klipsch R50-PM Manual de Usario

19 Septiembre 2024

Klipsch The Three II Manual de Usario

18 Septiembre 2024

Klipsch CDT-5800-C Manual de Usario

18 Septiembre 2024

Vocero Manuales

Últimos Vocero Manuales

Continental Edison CELED53HP20V2B4 Manual de Usario

27 Octubre 2024

Canton Vento 830.2 Manual de Usario

27 Octubre 2024

Jamo S7-25C Manual de Usario

27 Octubre 2024

Bowers Wilkins 707 S2 Manual de Usario

27 Octubre 2024

Monacor GLS-301/GR Manual de Usario

27 Octubre 2024

Monitor Audio Silver C150 Manual de Usario

26 Octubre 2024

FBT MITUS 210M Manual de Usario

26 Octubre 2024

CyberData Systems SIP 011398 Manual de Usario

26 Octubre 2024

Lamax PartyGo1 Play Manual de Usario

26 Octubre 2024

IKEA SYMFONISK 405.847.50 Manual de Usario

26 Octubre 2024