Klipsch THX ULTRA2 In-Wall Manual de Usario

Klipsch Vocero THX ULTRA2 In-Wall

Lee a continuación 📖 el manual en español para Klipsch THX ULTRA2 In-Wall (20 páginas) en la categoría Vocero. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/20
THX ULTRA
2 IN-WALL
LOUDSPEAKER
OWNER'S MANUAL
IMPORTANT SAFETY INSTRUCTIONS
1. READ these instructions.
2. KEEP these instructions.
3. HEED all warnings.
4. FOLLOW all instructions.
5. DO NOT use this apparatus near water.
6. CLEAN ONLY with dry cloth.
7. DO NOT block any ventilation openings. Install in accordance
with the manufacturer's instructions.
8. DO NOT install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. DO NOT defeat the safety purpose of the polarized or grounding
type plug. A polarized plug has two blades with one wider than
the other. A grounding type plug has two blades and a third
grounding prong. The wider blade or the third prong are provided
for your safety. If the provided plug does not fit into your outlet,
consult an electrician for replacement of the obsolete outlet.
10. PROTECT the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. ONLY USE attachments/accessories specified by the
manufacturer.
12. USE only with a cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the apparatus. When a cart is
used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. UNPLUG this apparatus during lightning storms or when unused
for long periods of time.
14. REFER all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power-supply cord or plug is damaged, liquid has been
spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate
normally, or has been dropped.
This symbol indicates that there are important
operating and maintenance instructions in the
literature accompanying this unit.
This symbol indicates that dangerous voltage
constituting a risk of electric shock is present within
this unit.
To reduce the risk of fire or electrical shock, do not expose this
product to rain or moisture. The product must not be exposed to
dripping and splashing and no object filled with liquids - such as a
vase of flowers - should be placed on the product.
No naked flame sources - such as candles - should be placed on
the product.
WARNING: Voltages in this equipment are hazardous to life.
No user-serviceable parts inside. Refer all servicing to qualified
service personnel.
ABOUT YOUR KLIPSCH PURCHASE
Your new Klipsch THX Ultra2 architectural speakers have been
designed to deliver great sound while remaining unobtrusive
wherever you install them.
The KL-7800-THX is designed for Left, Center or Right channel
use or wherever a monopole speaker is called for, such as
surround back channels in Ultra2 configurations. The result is a
flush-mount speaker that creates a powerful statement in any
application.
The KS-7800-THX features a patent-pending horn array,
consisting of two vertically stacked Tractrix
®Horn-loaded tweet-
ers. It is designed specifically for surround use in home theater
applications. The result is a flush-mount speaker that creates
enveloping ambient sound fields and localizing specific surround
effects through the use of Klipsch’s proprietary Wide Dispersion
Surround Technology (WDST™). The careful alignment of the two
controlled-directivity Tractrix Horn tweeters, angled opposite one
another, yields an incredibly wide dispersion pattern from a
flush-mount design.
Minimum Tools Required for Installation
#2 Phillips Screwdriver
Wire strippers
Level
Stud finder
Saw
In-Wall Speaker Placement (Refer to Figures 1 and 2)
Designed to function in any standard wall, Klipsch THX Ultra2
in-wall speakers are engineered for years of performance.
Minimum construction requirements call for drywall or other
mounting surfaces to be at least 1/2" thick.
To maximize performance, install the KL-7800-THX equally
spaced to either side of the video display. When being used as a
center channel, please locate this speaker as close to the video
display as is practical.
The KS-7800-THX should be installed to either side of the
listening position at an equal distance from the listener whenever
possible. You may also install them behind the listening position
and achieve good results.
THX ULTRA2 ARCHITECTURAL SPEAKERS
English Figure 1
THX Ultra2 7.1 surround systems utilize a surround back channel
in addition to the traditional side surrounds. When configuring
such a system it is suggested to use KL-7800 speakers in the
surround back location.
Speaker Installation (for New Construction, skip to step #3)
1. Cut the appropriate size opening in the wall using the
template provided. If the template is not available, cutout
dimensions are provided on the Klipsch website, at
www.klipsch.com. Sizes listed are minimum. If accuracy of
cut cannot be achieved, you may add 1/4" to each dimension.
Be careful not to cut through any existing wiring or plumbing.
Avoid compromising any fire stops between studs.
2. Run speaker wiring (18 gauge minimum) to the openings. Be
sure to comply with all building codes in your area.
3. Attach the wire to the speaker using the wire’s color coding or
markings as a guide to maintain proper polarity.
4.Insert the speaker assembly into the opening and attach by
tightening the six Phillips screws (see illustration). The frame’s
six “dogs” will swivel out and “sandwich” the wall and frame
together as they are tightened. If you use a power tool to tighten
these screws, please use a low torque setting. Failure to do so
could result in damage to your speaker (Refer to Figure 3)
5. At this point, you may paint the speaker grille before attaching
it to the speaker. Klipsch speakers and grilles are designed to
accept most types of paint. Use the supplied clear paint shield to
protect the speaker baffle and drivers when painting the bezel of
the speaker. Care should be taken to avoid excessive paint build-
up in the grille perforations. Please remove the scrim material
attached to inner surface of the grille by carefully peeling it out
prior to painting. Reinstall scrim after the paint on the grille
is dry.
6. Press the grille into place.
WARRANTYU.S. AND CANADA ONLY
The Warranty below is valid only for sales to consumers in the
United States or Canada.
KLIPSCH, L.L.C. ("KLIPSCH") warrants this product to be free
from defects in materials and workmanship (subject to the terms
set forth below) for a period of five (5) years from the date of
purchase. During the Warranty period, KLIPSCH will repair or
replace (at KLIPSCH’s option) this product or any defective parts
(excluding electronics and amplifiers). For products that have
electronics or amplifiers, the Warranty on those parts is for a
period of two (2) years from the date of purchase.
To obtain Warranty service, please contact the KLIPSCH
authorized dealer from which you purchased this product. If
your dealer is not equipped to perform the repair of your
KLIPSCH product, it can be returned, freight paid, to KLIPSCH for
repair. Please call KLIPSCH at 1-800-KLIPSCH for instructions.
You will need to ship this product in either its original packaging
or packaging affording an equal degree of protection.
Proof of purchase in the form of a bill of sale or receipted
invoice, which is evidence that this product is within the Warranty
period, must be presented or included to obtain Warranty service.
This Warranty is invalid if (a) the factory-applied serial number
has been altered or removed from this product or (b) this product
was not purchased from a KLIPSCH authorized dealer. You may
call 1-800-KLIPSCH to confirm that you have an unaltered serial
number and/or you purchased from a KLIPSCH authorized dealer.
This Warranty is only valid for the original purchaser and will
automatically terminate prior to expiration (if applicable) if this
product is sold or otherwise transferred to another party.
This Warranty does not cover cosmetic damage or damage due
to misuse, abuse, negligence, acts of God, accident, commercial
use or modification of, or to any part of, the product. This
Warranty does not cover damage due to improper operation,
maintenance or installation, or attempted repair by anyone other
than KLIPSCH or a KLIPSCH dealer which is authorized to do
KLIPSCH warranty work. Any unauthorized repairs will void this
Warranty. This Warranty does not cover product sold AS IS or
WITH ALL FAULTS.
REPAIRS OR REPLACEMENTS AS PROVIDED UNDER THIS
WARRANTY ARE THE EXCLUSIVE REMEDY OF THE CONSUMER.
KLIPSCH SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR BREACH OF ANY EXPRESS OR
IMPLIED WARRANTY ON THIS PRODUCT. EXCEPT TO THE
EXTENT PROHIBITED BY LAW, THIS WARRANTY IS EXCLUSIVE
AND IN LIEU OF ALL OTHER EXPRESS AND IMPLIED WAR-
Figure 2
Figure 3

Especificaciones del producto

Marca: Klipsch
Categoría: Vocero
Modelo: THX ULTRA2 In-Wall

¿Necesitas ayuda?

Si necesitas ayuda con Klipsch THX ULTRA2 In-Wall haz una pregunta a continuación y otros usuarios te responderán




Vocero Klipsch Manuales

Vocero Manuales

Últimos Vocero Manuales