Konig SEC-IPCAM100W Manual de Usario

Konig Bewakingscamera SEC-IPCAM100W

Lee a continuación 📖 el manual en español para Konig SEC-IPCAM100W (168 páginas) en la categoría Bewakingscamera. Esta guía fue útil para 5 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/168
2013-07-30
SEC-IPCAM100B(W)
SEC-IPCAM105B(W)
MANUAL (p. 2)
IP camera
ANLEITUNG (S. 13)
IP-Kamera
MODE D’EMPLOI (p. 24)
Caméra IP
GEBRUIKSAANWIJZING (p. 35)
IP-camera
MANUALE (p. 46)
Telecamera IP
MANUAL DE USO (p. 57)
Cámara IP
HASZNÁLATI ÚTMUTATÓ (o. 68.)
IP kamera
KÄYTTÖOHJE (s. 79)
IP-kamera
BRUKSANVISNING (s. 90)
IP-kamera
NÁVOD K POUŽITÍ (s. 101)
IP kamera
MANUAL DE UTILIZARE (p. 112)
Cameră de supraveghere IP
ΕΓΧΕΙΡΙΔΙΟ XPHΣ ΣH (σελ. 123)
Κάμερα IP
BRUGERVEJLEDNING (s. 135)
IP-kamera
VEILEDNING (s. 146)
IP-kamera
ИНСТРУКЦИЯ (стр. 157)
IP-камера
2
ENGLISH
IP camera
Introduction:
Watch over your properties with this genuine Plug & Play IP camera. Easy and simple to install,
works without the need for any form of configuration. The free uCare Cam app allows you to watch
and listen to live footage on your Smartphone or other mobile devices, anytime and anywhere. The
free uCare Cam app is available on Google Play and the Apple App Store. Advanced features
provide you e-mail or app notification when motion is detected. Photo and/or video footage can be
played back at any moment. Also suitable for use as a baby monitor due to the 2-way audio
function.
We recommend that you read this manual before installing/using this product.
Keep this manual in a safe place for future reference.
System requirements:
Device running Android 4.0 and up or iOS 5.0 and up.
Router with Wi-Fi.
Download the “uCare Cam” app from Google Play or the Apple app store
Android Device
Google Play Store “uCare Cam” Download Link
iOS Device
App Store “uCare Cam” Download Link
After the software installation is complete,
click the icon to run the app.
Default “uCare Cam” password: 0000
Manager's Name: admin
Manager's Password: 0000
2
1
Installation of the App on your mobile device
3
Figure 1
“Camera List Window”
There are two options to continue the easy set up of your IP camera.
Power On
Plug the power adapter DC connector into the DC input port of the IP camera and then plug
the power adapter into a wall outlet. The status LED on the IP camera will turn green for
about 15 seconds.
Programme Loading
The status LED will flash red for about 15 seconds.
Router Link Mode
Wait until the status LED colour alternates between red and green.
Note:
If the LED does not turn red and green, then press the WPS/Reset button for more than
10 seconds to restart the IP camera.
When the green status LED lights up and holds, and then the red status LED flashes twice,
after which it changes into green, the IP camera has entered the RESET state. At this
moment you can release the button and then wait until the status LED alternates between
red and green.
ANDROID (for Apple go to: Step 8)
Set the IP camera to connect to the Wi-Fi Router
Open the “uCare CamApp and select:
Click here to install the new Wi-Fi Camera
In the screen of the Camera List Window (see figure 1).
4
3
2
1
Install your IP camera by ROUTER MODE

Especificaciones del producto

Marca: Konig
Categoría: Bewakingscamera
Modelo: SEC-IPCAM100W

¿Necesitas ayuda?

Si necesitas ayuda con Konig SEC-IPCAM100W haz una pregunta a continuación y otros usuarios te responderán




Bewakingscamera Konig Manuales

Bewakingscamera Manuales

Últimos Bewakingscamera Manuales