Kress KUC61.9 Manual de Usario

Kress taladradora KUC61.9

Lee a continuación 📖 el manual en español para Kress KUC61.9 (12 páginas) en la categoría taladradora. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

SAFETY AND OPERATING MANUAL

Lithium-Ion Brushless Rotary Hammer

KUC61 KUC61.2 KUC61.9

Lithium-Ion Brushless Rotary Hammer

KUC61 KUC61.2 KUC61.9

GENERAL POWER TOOL

SAFETY WARNINGS

WARNING Read all safety warnings and

all instructions. Failure to follow the warnings

and instructions may result in electric shock, ﬁre and/or

serious injury.

Save all warnings and instructions for future

reference.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered

or dark areas invite accidents.

b) Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power

tools create sparks which may ignite the dust or

fumes.

c) Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way. Do

not use any adapter plugs with earthed

(grounded) power tools. Unmodified plugs and

matching outlets will reduce risk of electric shock.

b) Avoid body contact with earthed or

grounded surfaces, such as pipes,

radiators, ranges and refrigerators. There is

an increased risk of electric shock if your body is

earthed or grounded.

c) Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord

for carrying, pulling or unplugging the

power tool. Keep cord away from heat,

oil, sharp edges or moving parts. Damaged

or entangled cords increase the risk of electric

shock.

e) When operating a power tool outdoors, use

an extension cord suitable for outdoor use.

Use of a cord suitable for outdoor use reduces the

risk of electric shock.

f) If operating a power tool in a damp

location is unavoidable, use a residual

current device (RCD) protected supply. Use

of an RCD reduces the risk of electric shock.

3) Personal safety

Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication. A

moment of inattention while operating power tools may

result

in serious personal injury.

b) Use personal protective equipment.

Always wear eye protection. Protective

equipment such as dust mask, non-skid safety

shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal

injuries.

c) Prevent unintentional starting. Ensure

the switch is in the off-position before

connecting to power source and/or battery

pack, picking up or carrying the tool.

Carrying power tools with your finger on the

switch or energising power tools that have the

switch on invites accidents.

d) Remove any adjusting key or wrench

before turning the power tool on. A wrench

or a key left attached to a rotating part of the

power tool may result in personal injury.

e) Do not overreach. Keep proper footing

and balance at all times. This enables better

control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing

or jewellery. Keep your hair and clothing

away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving

parts.

g) If devices are provided for the connection

of dust extraction and collection facilities,

ensure these are connected and properly

used. Use of dust collection can reduce dust-

related hazards.

4) Power tool use and care

a) Do not force the power tool. Use the

correct power tool for your application. The

correct power tool will do the job better and safer

at the rate for which it was designed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power tool

that cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power

source and/or remove the battery pack,

if detachable, from the power tool before

making any adjustments, changing

accessories, or storing power tools. Such

preventive safety measures reduce the risk of

starting the power tool accidentally.

Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these instructions

to operate the power tool. Power tools are

dangerous in the hands of untrained users.

Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tool’s operation.

If damaged, have the power tool repaired

before use. Many accidents are caused by poorly

maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are easier

to control.

Especificaciones del producto

Marca:	Kress
Categoría:	taladradora
Modelo:	KUC61.9
Color del producto:	Zwart
Ancho:	745 mm
Profundidad:	93 mm
Altura:	62 mm
Longitud del cable:	1.5 m
Peso del embalaje:	2000 g
Ancho del embalaje:	900 mm
Empaquetadura en profundidad:	135 mm
Altura del embalaje:	105 mm
Material de la carcasa:	Polypropyleen (PP)
Bluetooth:	Ja
Interruptor encendido / apagado:	Ja
Tecnología de conectividad:	Bedraad en draadloos
Tipo de fuente de energía:	AC
Cables suministrados:	AC
Energía promedio:	30 W
Control del volumen:	Draaiknop
Certificación:	RoHS, WEEE, CE/EMC, FCC, IEC, RCM-POC, RCM-SDOC, REACH
Radio FM:	Nee
Corriente de entrada:	Ja
Uso recomendado:	Universeel
Impedancia:	8 Ohm
Canales de salida de audio:	- kanalen
Colocación de los altavoces:	Muur-montage
altavoz de graves:	Ja
Rango de frecuencia:	50 - 20000 Hz
Sensibilidad:	101 dB
Sistema de suspensión para la pared.:	Ja
Entrada auxiliar:	Ja
reflejo de graves:	Ja
Tipo de altavoz:	2-weg
Potencia RMS del altavoz de la barra de sonido:	30 W
Distorsión Armónica Total (THD):	1 procent
subwoofer suministrado:	Nee
Receptor suministrado:	Nee
Soportes de montaje incluidos:	Ja
Compatibilidad con acoplamiento de Apple:	Niet ondersteund
Tipo de conector de acoplamiento:	Niet ondersteund
Peso de la barra de sonido:	1400 g
Amplificador:	Ingebouwd
Diámetro del altavoz de graves:	5.25 "
Diámetro hogetonenluidspreker:	0.5 "
tweeter:	Ja
voltaje-de-entrada-de-CA:	100-240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Código del Sistema Armonizado (SA):	85182200
Entradas de audio RCA:	1
amplificador de potencia de salida:	54 W