Kurzweil Forte SE Manual de Usario

Kurzweil Teclado Forte SE

Lee a continuación 📖 el manual en español para Kurzweil Forte SE (18 páginas) en la categoría Teclado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/18
is guide will help you hook up the Forte SE to your sound system and MIDI system, give you a quick
overview, and show you how to start playing music with the Forte SE. A full manual for the Forte SE can
be obtained in electronic format from www.kurzweil.com.
Specications
Forte SE is Kurzweil’s latest entry in the Forte line of stage pianos. Some of the key specications include:
• FlashPlay technology with support for 2GB of Sound ROM
• High Denition Japanese Grand Piano and High Denition Electric Piano
• ROM sounds included from Kurzweil’s acclaimed PC3 series, KORE64 expansion,
and German D Grand EXP Grand Piano expansion
• New Piano String Resonance Simulation
• Full KB3 organ simulations with 9 sliders as drawbars
• 8 Zone MIDI Controller
• Space for 1024 Factory and 1024 User Programs and Multis (16 Categories of Programs)
• Arpeggiator with dedicated On/O button (1 per Program, up to 8 in Multi Mode)
• MP3 player audio input jack
• Full 128 voices of polyphony
• Hundreds of Eects Chains
®
It’s the
sound
.
®
SE
GETTING STARTED GUIDE
Before You Start…
2
GETTING STARTED GUIDE
Before You Start…
Don’t connect anything until you make sure the Forte SE is properly and safely situated. If
your Forte SE keyboard has been out in the cold, give it time to warm up to room temperature
before starting it, since condensation may have formed inside.
Setting up the Forte SE
1. Set the keyboard on a hard, at, level surface.
2. Four adhesive-backed rubber feet are provided with Forte SE. Carefully turn the keyboard
over onto a soft surface, remove the paper backing from the rubber feet and attach them.
NOTE : Unless the instrument will always be used with a keyboard stand,
attachment of the rubber feet is strongly advised. Otherwise protruding
screws will scratch the tabletop.
3. Connect the AC power cord to the Forte SE. Before plugging the cable into the power
outlet, check that the power is compatible with the Forte SE. e Forte SE runs on AC
power and works with voltages from 80-265 volts 50-60 Hz. e voltage level is detected
and set automatically by the Forte SE. If your power source does not have the standard
three hole outlet, you should take the time to install a proper grounding system. is will
reduce the risk of a shock. If your power outlet is not within these ranges it is recommended
you use an appropriate adaptor.
4. Plug the power cable into the wall.
5. Plug the Switch Pedal into the marked SW1 (Sustain) Pedal jack on the Forte SE rear
panel.
6. Connect stereo headphones to the headphone jack on the rear panel or connect the audio
outputs to your mixer or amplier inputs using standard (1/4-inch) audio cables (use the
Left out for Balanced (“TRS” or “Stereo”) cables are recommended if your mixer mono).
or amp supports balanced inputs.
The Rear Panel
Using the Forte SE
3
GETTING STARTED GUIDE
7. Make sure your sound system is at a safe volume level. Also make sure that the Forte SE
Master Volume slider (on the far left side of the front panel) is all the way down.
Using the Forte SE
1. Power up the Forte SE using the power switch on the rear left side of the instrument, and
then raise the Master Volume slider, and mixer/amp volume. Your Forte SE keyboard starts
up in Program Mode by default. Press one of the buttons under the “Mode” label to the
right of the display to switch Modes.
Master Volume Slider Mode Selection
2. If you are connected to a mixing board and hear distortion, reduce the gain level on your
mixing board, or use the pad (a switch that decreases the input audio signal level, typically by
20dB) if it has one.
3. To hear the capabilities of the Forte SE, you can play the demo songs. Press the 13 & 14
Program/Multi buttons simultaneously to listen to a demo song.
4. In Program Mode, scroll through the Programs using the Alpha Wheel, the Previous and
Next buttons, or press a Category button to audition the sounds in the Forte SE. e Forte
SE has short demos for each of the factory Programs. To hear a Program Demo for the
current Program, press the 11 & 12 Program/Multi buttons simultaneously.
The Rear Panel
e power switch and most of the Forte SE connections are located on the rear panel.

Especificaciones del producto

Marca: Kurzweil
Categoría: Teclado
Modelo: Forte SE

¿Necesitas ayuda?

Si necesitas ayuda con Kurzweil Forte SE haz una pregunta a continuación y otros usuarios te responderán


Teclado Kurzweil Manuales

Kurzweil

Kurzweil SP1 Manual de Usario

17 Septiembre 2024
Kurzweil

Kurzweil SP4S-8 Manual de Usario

3 Septiembre 2024
Kurzweil

Kurzweil PC3LE7 Manual de Usario

2 Septiembre 2024
Kurzweil

Kurzweil K2700 Manual de Usario

2 Septiembre 2024
Kurzweil

Kurzweil PC3 Manual de Usario

2 Septiembre 2024
Kurzweil

Kurzweil PC3A8 Manual de Usario

2 Septiembre 2024
Kurzweil

Kurzweil K2600 Manual de Usario

2 Septiembre 2024
Kurzweil

Kurzweil K2600R Manual de Usario

1 Septiembre 2024
Kurzweil

Kurzweil PC4-7 Manual de Usario

1 Septiembre 2024
Kurzweil

Kurzweil KP-120A Manual de Usario

1 Septiembre 2024

Teclado Manuales

Últimos Teclado Manuales

Digitech

Digitech iPB-10 Manual de Usario

27 Octubre 2024
Kawai

Kawai ESX Manual de Usario

27 Octubre 2024
Patriot

Patriot Viper V765 Manual de Usario

26 Octubre 2024
Casio

Casio MZ-X500 Manual de Usario

23 Octubre 2024
Casio

Casio WK-1630 Manual de Usario

23 Octubre 2024
Casio

Casio ToneBank CT-636 Manual de Usario

23 Octubre 2024
Casio

Casio Privia PX-830 Manual de Usario

23 Octubre 2024
Casio

Casio 100 ToneBank SA-1 Manual de Usario

23 Octubre 2024
Casio

Casio CTK-3400SK Manual de Usario

23 Octubre 2024
Yamaha

Yamaha PSR-E413 Manual de Usario

23 Octubre 2024