Kurzweil PC4SE Manual de Usario

Lee a continuación 📖 el manual en español para Kurzweil PC4SE (24 páginas) en la categoría Teclado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/24
1
®
It’s the
sound
.
®
Part Number 910590-001
Rev. 001
GETTING STARTED GUIDE
Features of the PC4 SE
Sounds
2
Getting Started
is guide will give you a quick overview of the PC4 SE. For more details, download the PC4 SE
Musicians Guide from www.kurzweil.com.
Features of the PC4 SE
Sounds
FlashPlay technology utilizing 2GB of instrument samples including:
Optimized German D and Japanese C7 Pianos, Triple Strike Piano, 73 Electric Piano,
Clavinets, Harpsichords, Celeste, Bowed and Hit Crotales, Vector Synthesis Waveforms
Updated Rock, Synth and Orchestral sounds from Kurzweil’s PC4, SP6, PC3, and KORE64
10 Categories of Programs (Piano, E. Piano, Clav, Organ, Strings/Pad, Brass/Wind, Synth,
Guitar/Bass, Drum/Perc, Misc)
KSR: Kurzweil String Resonance (Piano String Resonance Simulation)
Piano programs support optional Half-Damper pedal for half pedaling
KB3 Organ simulation with control of 9 drawbars
Kurzweil’s highly acclaimed VAST Synthesis and FX engine
FM: Classic 6 operator FM synthesis
Arpeggiator with dedicated On/O and Tap Tempo buttons (up to 5 simultaneous in Multi Mode)
CC Sequencer with dedicated On/O and Tap Tempo buttons (up to 5 simultaneous in Multi Mode)
More than 4000 User IDs to save your own Programs and Multis
256 voices of polyphony
16 MIDI Channels for multitimbral applications in Program Mode
16 MIDI Tracks for recording in Song Mode
5 Zone MIDI Controller in Multi Mode
Quick Start
Controllers
3
Controllers
88-key fully weighted hammer action keyboard with piano like feel
Control section with 5 assignable knobs, sliders, and buttons
Assignable Variation button
EQ button
Transpose buttons
Arpeggiator section with buttons for Arpeggiator Enable, Arpeggiator Latch, CC Sequencer Enable,
and Tap Tempo
Pitch wheel
Assignable modulation wheel
2 assignable switch pedal jacks (each jack can be used with a dual pedal for up to 4 switch pedals)
1 assignable CC pedal jack
Quick Start
Be sure to check the Kurzweil website at www.kurzweil.com for new sounds, documentation
and software updates.
Setting Up the PC4 SE
1. If your PC4 SE keyboard has been out in the cold during shipping, give it time to warm
up to room temperature before powering it on, since condensation may have formed
inside.
2. Place the PC4 SE on a keyboard stand or on a hard, at, level surface.
3. Connect the DC power adaptor to the PC4 SE DC Power jack.
4. Make sure your power outlet is compatible with the included power adaptor, then plug
the power cable into the power outlet.
5. Plug the included Switch Pedal into the SW1 (SUSTAIN) jack on the PC4 SE rear
panel.
6. If you have an additional switch pedal, plug it into the SW2 jack for Sostenuto control.
7. If you have a MIDI CC pedal (also known as a MIDI expression or volume pedal), plug
it into the CC (VOLUME) jack for volume control.

Especificaciones del producto

Marca: Kurzweil
Categoría: Teclado
Modelo: PC4SE

¿Necesitas ayuda?

Si necesitas ayuda con Kurzweil PC4SE haz una pregunta a continuación y otros usuarios te responderán




Teclado Kurzweil Manuales

Teclado Manuales

Últimos Teclado Manuales