La Crosse Technology 308-1412S Manual de Usario

Lee a continuación 📖 el manual en español para La Crosse Technology 308-1412S (8 páginas) en la categoría No categorizado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/8
M - Sodel: 308 1412 www.lacrossetechnology.com/support Page | 1
Model: 308 1412 - S
Manual
DC: 08 0217
WIRELESS COLOR FORECAST STATION
SENSOR
TX141TH v2-B
LED
TX
Sensor Battery
2 “AA”
3 “AAA”
AC Power
USB
PORT
Buttons
M - Sodel: 308 1412 www.lacrossetechnology.com/support Page | 2
INITIAL SETUP
1. Insert 2 new “AA” batteries (not included) into the TX141TH- Bv2
transmitter. Observe the correct polarity. The red LED will flash when
transmitting.
2. .0 Insert the included 5 volt power cable into the forecast station and
then into wall outlet.
3. Optional: Insert 3 new “AAA” batteries (not included) into the forecast
station. Observe the correct polarity.
4. Set time and date.
5. After 5 minutes place the sensor in a shaded outdoor location.
SET TIME, DATE AND TEMPERATURE UNITS
1. the Hold SETTINGS button to enter time set mode.
2. To adjust values press the or buttonUP DOWN ARROW .
3. the button Press SETTINGS to confirm adjustments and move to
next item.
Settings order:
12/24 Hour Time Format
Hour
Minutes
Year
Month
Date
Fahrenheit/Celsius
Press the button SETTINGS to exit, or wait 20 seconds without pressing
buttons to return to the normal time display.
SET TEMPERATURE ALERTS
1. the button Hold TEMP ALERTS until the station beeps.
2. The temperature alert value will blink in set mode.
3. To adjust alert values press the or buttonUP DOWN ARROW .
4. the Press TEMP ALERTS button to confirm & move to the next alert.
The temperature alert order:
1. 2. Outdoor High, Outdoor Low, 3. Indoor High, 4. Indoor Low
Press the TEMP ALERTS button to exit, or wait 20 seconds without
pressing buttons to return to normal time display
ARMS/DISARMS TEMPERATURE ALERTS
Press & release the TEMP ALERTS button to toggle between the alerts
Outdoor HI / Outdoor LOW / Indoor HI / Indoor LOW
M - Sodel: 308 1412 www.lacrossetechnology.com/support Page | 3
Arm the alert with the UP ARROW button.
Disarm the alert with DOWN ARROW button.
ALERT BELL ICON appears when armed.
ACTIVE TEMPERATURE ALERT
When temperature alert is ringing, the alert icon will flash.
The alert will ring for five seconds every minute, until the temperature
is out of alert range.
. . Press any button to silence the alert The alert icon will flash
Disarm ALERT: Press and release the TEMP ALERT button to view
the armed alert.
a With HI or LO lert selected, press the DOWN ARROW button to
disarm that alert ( ). OFF
SET TIME ALARM
1. the button Hold TIME ALARM to enter alarm time set mode.
2. the or button To adjust ALARM TIME press UP DOWN ARROW s .
3. the button Press TIME ALARM to confirm adjustments and move to
the next item.
Alarm Time setting order: 1. Hours 2. Minutes
ACTIVATE/DEACTIVATE TIME ALARM
Press the TIME ALARM button once to view alarm time.
Press the TIME ALARM button again to activate the alarm.
Once activated the ell icon appears. b
Press the TIME ALARM button again to deactivate the
alarm. disappear.The bell icon will
SNOOZE (SILENCES ALARM TEMPORARILY)
When alarm sounds, press the LIGHT/SNOOZE button to silence the
alarm for 10 minutes.
The alarm icon will flash.
bIn snooze mode, press any button EXCEPT the TIME ALARM utton
to stop alarm for one day.
Note: The alarm is crescendo sound. The alarm will sound for 2 minutes
and then shut off completely.
High & Low Alerts
Armed
High & Low Alerts
Disarmed

Especificaciones del producto

Marca: La Crosse Technology
Categoría: No categorizado
Modelo: 308-1412S

¿Necesitas ayuda?

Si necesitas ayuda con La Crosse Technology 308-1412S haz una pregunta a continuación y otros usuarios te responderán




No categorizado La Crosse Technology Manuales

No categorizado Manuales

Últimos No categorizado Manuales