La Crosse Technology LTV-TH2I Manual de Usario

La Crosse Technology No categorizado LTV-TH2I

Lee a continuación 📖 el manual en español para La Crosse Technology LTV-TH2I (3 páginas) en la categoría No categorizado. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/3

Model: LTV-TH2

DC: 083017

Thermo-hygro Sensor

Power & Mounting

LED Light

Battery Cover

Hole for

mounting

TX F/C

∙ Press TX to send a signal

∙ Press F/C to select Fahrenheit

or Celsius display on sensor.

1. Install 2-AA batteries according to polarity and replace battery cover. The blue LED light will ﬂash

when transmitting.

Mounting:

1. Use the hole at the top to hang your sensor from the back using a nail. Or, insert one mounting screw

through the front of your sensor.

2. Mount your sensor on a north-facing wall or in any shaded area. Under an eave or deck rail is

preferred to avoid inaccurate readings from the sun.

3. The maximum wireless transmission range to the weather station is up to 400 feet (121 meters) in open

air, not including walls or ﬂoors.

4. Be sure your sensor is mounted vertically, to allow moisture to drain out properly.

Note: Watch sensor mounting video: http://bit.ly/TH_SensorMounting

Sensor ID

Standalone station:

Your sensor has a bar code and ID number. This ID number locks your sensor into

your station. Follow the instructions in your station manual to delete the sensor ID

for sensor replacement.

La Crosse View™ compatible system:

The sensor ID and bar code are recognized by the La Crosse View™ app if you are using

this sensor as an add-on to your existing La Crosse View™ compatible system.

To add this sensor to your existing La Crosse View™ compatible system:

1. Open your La Crosse View app to add sensors.™

2. From Main Menu - select “Devices” under “Add/Edit”

3. On Edit Devices page - select “ADD DEVICE”

4. Scan Device ID - Scan the bar code on your sensor or press inside the Device ID search box to enter

your code manually. Once entered, select “Search”.

5. On Conﬁrm Device page - Conﬁrm the sensor image and model number are correct and select “YES”

6. On Enter Device and Location Names page - enter Device Name and select a location or enter

a Location Name for your sensor. Select “DONE”.

Note: This sensor cannot connect to the La Crosse View app without a La Crosse View compatible

station. Station’s that are La Crosse View compatible have built-in Wi-Fi capabilities that send your

sensor’s data to the La Crosse View app. For more information about our new connected stations visit:

http://www.lacrossetechnology.com/products/connected

JOIN THE CONVERSATION

giveaways.

Let’s Be Social!

If you have ideas for features or support solutions you’d like to see us make, please let us know! We tru-

ly want to make owning a La Crosse Technology product not only a practical experience, but also a fun

one. So email us at: store@lacrossetechnology.com

Help Us, Help You!

Warranty and Support

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to

manufacturing defects in materials & workmanship. Before returning a product, please contact our friendly customer support

with questions or visit our online help:

Phone: 1-608-782-1610

Online Product Support and Registration: www.lacrossetechnology.com/support

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other antenna or transmitter.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modiﬁcations to this

equipment. Such changes or modiﬁcations could void the user authority to operate the equipment.

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this

transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located

or operating in conjunction with any other antenna or transmitter

electronic, mechanical or chemical process without the written permission of the publisher. This booklet may contain errors or

misprints. The information it contains is regularly checked and corrections are included in subsequent editions. We disclaim

any responsibility for any technical error or printing error, or their consequences.

All trademarks and patents are recognized.

Speciﬁcations

• Temperature Range: -40°F to 140°F (-40°C to 60°C)

• Humidity Range: 10% RH to 99%RH

• Transmission Range: Up to 400 feet (121 meters) in open air, RF 915 MHz

• Batteries: 2-AA, IEC, LR6 batteries (not included)

• Battery Life: over 24 months with reputable batteries

• Dimensions: 1.97” L x 0.75” W x 5.73” H (5.0cm L x 1.91cm W x 14.55cm H)

Especificaciones del producto

Marca:	La Crosse Technology
Categoría:	No categorizado
Modelo:	LTV-TH2I
Colocación del dispositivo:	Vrijstaand
Tipo de operación:	Rotary, Touch
Color del producto:	Grijs
Bisagras de puerta:	Links
Pantalla incorporada:	Ja
Ancho:	600 mm
Profundidad:	550 mm
Altura:	850 mm
Impuesto neto:	2200 W
tipo de cargador:	Voorbelading
Temporizador de inicio retrasado:	Ja
Retraso del inicio:	24 uur
Indicación de tiempo restante:	Ja
Bloqueo infantil:	Ja
Nivel de ruido:	72 dB
Función antiarrugas:	Ja
Clase-de-eficiencia-energética:	A
Dirección de apertura de puerta intercambiable.:	Nee
Consumo de agua por ciclo:	47 l
Clase de medicamentos centrífugos.:	B
Nivel de ruido (lavado):	- dB
Sistema de control de desequilibrio:	Ja
Velocidad centrífuga ajustable:	Ja
Velocidad máxima de centrifugado:	1400 RPM
Bluetooth:	Ja
Actual:	10 A
Clase de emisión de ruido:	A
tecnología inversor:	Ja
Nivel de ruido durante la centrifugación.:	- dB
Porcentaje de humedad residual:	53.9 procent
Tiempo de ciclo (máx.):	218 min
Número de programas de lavado:	15
Consumo de energía por 100 ciclos.:	47 kWu
Suministro de agua:	Koud
Velocidad mínima de centrifugado:	600 RPM
Puerta-abierta:	Opening aan zijkant
Capacidad nominal:	8 kg
voltaje-de-entrada-de-CA:	230 V
Frecuencia-de-entrada-de-CA:	50 Hz
Escala de eficiencia energética:	A tot G
Programas-de-lavado:	Colour, Delicate/silk, Easy care, Eco, Hand/wool, Jeans/denim, Outdoor, Pre-wash, Quick, Spin/drain, Sport
tipo de tambor:	Aquawave
Función rápida+:	Ja