La Crosse Technology Payton 404-3015CC Manual de Usario

La Crosse Technology Reloj Payton 404-3015CC

Lee a continuación 📖 el manual en español para La Crosse Technology Payton 404-3015CC (2 páginas) en la categoría Reloj. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

15-Inch Indoor/Outdoor

Payton Wall Clock

Model: 404-3015CC

DC: 081622

This product is warranted to be free from defects in material and workmanship under

normal use and service for a period of two years from the date of sale to the customer.

Warranty will not apply to defects resulting from abuse, accidents, or misuse. If a defect

that is covered by this warranty arises during the warranty period, promptly return

the clock (postage prepaid) with proof of purchase showing the date the clock was

purchased to the following address and such defects will be repaired, or the products

will be replaced at

La Crosse Clock Company option without charge.

La Crosse Clock Company

Warranty Department

2830 South 26th Street.

La Crosse, WI 54601

For online support visit: bit.ly/contact_techsupport

Patents: www.lacrossetechnology.com/pages/patent

WARRANTY & SUPPORT

Made in China - Printed in China

This product can expose you to chemicals including acrylonitrile, butadiene, and

styrene, which are known to the State of California to cause cancer and birth defects or

other reproductive harm. For more information go to: www.P65Warnings.ca.gov

CA WARNING:

Battery Requirements: 1 AA (IEC, LR6, 1.5V) required in the

Battery Compartment (Alkaline recommended)

Battery Life: 12 months

Temperature Range: 0ºF to 120ºF

Humidity Range: 10% RH to 90% RH

Dimensions: 15” x 2.12”

SPECIFICATIONS

CARE & MAINTENANCE

Battery replacement instruction:

When batteries of dierent brand or type are used together, or new and old batteries

are used together, some batteries may be over-discharged due to a dierence of

voltage or capacity. This can result in venting, leakage, and rupture and may cause

personal injury.

• Always purchase the correct size and grade of battery suitable for the intended use.

• Always replace the whole set of batteries at one time, taking care not to mix old and

new ones, or batteries of dierent types.

• Clean the battery contacts and those of the device prior to battery installation.

• Ensure the batteries are installed correctly with regard to polarity (+ and -).

• Remove batteries from product during periods of non-use. Battery leakage can cause

corrosion and damage to this product.

• Remove used batteries promptly.

• For recycling and disposal of batteries, and to protect the environment please check

the internet or your local phone directory for local recycling centers and / or follow

local government regulations.

THERMOMETER / HYGROMETER

POWER UP

1. Insert 1 fresh AA alkaline battery, according to polarity, into the

snug Battery Compartment.

2. Rotate the Time Set Wheel to set the time.

3. Mount on a wall and enjoy!

Note: The quartz movement

will keep the clock running

accurately. If the clock does not

operate, or steadily loses time,

replace the battery.

Time Set

Wheel

Battery

Compartment

Learn more from our video: bit.ly/wallclock_setup

MOVEMENT COVER

1. OPEN: Turn the cover counterclockwise until the head is aligned

with the arrow. Then lift the cover o the clock.

2. CLOSE: Place the cover in the open position. Then turn it clock

wise until the head is back on top, directly under the hanger hole.

MOUNTING

Indoor: Mount the clock on a wall using the hanging hole on the back.

Outdoor: Choose a location with an overhang to protect the clock from

the overhead sun or standing snow or rain. A shaded location will

prevent inaccurate temperature readings. Mount the clock on a wall

using the hanging hole on the back.

OPEN

• Your thermometer and hygrometer have been pre-calibrated and

should not need adjustment.

• Before manually adjusting your sensors, allow the clock to sit for at

least 2 hours in the same location.

• To manually adjust your sensors, gently turn the temperature or

humidity sensor adjustment on the back of the clock until desired

setting is reached.

Especificaciones del producto

Marca:	La Crosse Technology
Categoría:	Reloj
Modelo:	Payton 404-3015CC
Color del producto:	Black, Blue, Grey, Red
Peso del embalaje:	2650 g
Fuente-de-alimentación:	Batterij/Accu
Tiempo de carga:	300 min
Dimensiones del paquete (AnxPrxAl):	270 x 360 x 90 mm
Batería/Voltaje de la batería:	18 V
Velocidad de ralentí (1ª marcha):	550 RPM
Tuerca maxima:	12 Nm
Nivel de presión de sonido:	71 dB
Incertidumbre k:	1.5 m/s²
Contrarrestar:	Ja
Portabrocas:	Zonder sleutel
Luz incorporada:	Ja
Boren:	Ja
Tornillos:	Ja
Incluye cargador de batería:	Ja
Incluye batería:	Ja
Capacidad de la batería:	0.8 Ah
Emisión vibratoria:	3.2 m/s²
Número de baterías incluidas:	2 stuk(s)
Punta de destornillador:	Ja
Diseño de producto:	Boormachine met pistoolgreep
Tecnología de batería:	Nikkel-Cadmium (NiCd)
Nivel-de-potencia-sonora:	82 dB