La Crosse Technology TX14R Manual de Usario

La Crosse Technology No categorizado TX14R

Lee a continuación 📖 el manual en español para La Crosse Technology TX14R (3 páginas) en la categoría No categorizado. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/3

Model: TX14R

DC: 092817

Rain Sensor

Insert 2- AA batteries into the rain sensor according to polarity.

1. Flip open both locking tabs on your rain sensor and lift o the funnel portion.

2. Pull up on the battery cover and remove.

3. Install 2-AA batteries according to polarity. Reposition the battery cover over the battery compartment,

and ﬁrmly push down to lock it back into place

5. Remove cardboard and any tape around the rocker before use. These were used to protect the

sensor from unwanted movement during shipping.

6. Place the funnel portion back over the sensor and re-secure the locking tabs.

Power

Funnel

Battery Cover

Locking Tab

Remove piece under

rocker of rain sensor

Clean Rain Sensor

1. Press the Locking Tabs on each end and lift o the funnel.

2. Gently remove debris or insects inside the rain sensor.

3. Clear debris from drain vents.

4. Clear debris from the rain funnel itself.

5. Reinstall the rain funnel.

Note: Do not oil the rain sensor.

Position TX14R Rain Sensor

• Mount your rain sensor in an open area for a more accurate rain count.

• Placing the rain sensor on the ground provides the most accurate rainfall measurement as there is no

wind shear. Unfortunately, since insects think of rain sensors as personal hotels, placing your sensor

3-6 feet above ground may deter the insects.

• This is a self-emptying sensor, but be sure your unit is not sitting in a depression that would prevent

rain from draining out of the bottom

• Your rain sensor should be accessible to allow for periodic cleaning of leaves or other debris that may

clog the funnel.

• Install the Rain sensor on a level platform that is stationary and has a direct line of sight to your station.

• Insert mounting screws through the holes in the base of the rain sensor. Do not over tighten.

• Use the bubble level inside your sensor to be sure it is level.

• Avoid other wireless rain sensors as this can cause inaccuracy due to signal interference.

• The maximum wireless transmission range to the rain station is over 300 feet (91 meters) in open air,

not including walls or ﬂoors.

• For video instruction, please visit: http://bit.ly/Rain_SensorMounting

Mounting Screw (3 total) Bubble Level

JOIN THE CONVERSATION

Let’s Be Social!

Speciﬁcations

Rain Range: 0-393.6 inches (0-9999mm) over 300 feet open air 433MHz RF

Batteries: 2-AA, IEC, LR6 batteries (not included)

Battery Life: over 12 months with reputable batteries.

Dimensions: 7.14” L x 3.43” W x 4.94” H (18.13cm L x 8.72cm W x 12.54cm H)

If you have ideas for features or support solutions you’d like to see us make, please let us know! We

truly want to make owning a La Crosse Technology product not only a practical experience, but also a fun one. So email us

at: store@lacrossetechnology.com

Help Us, Help You!

Warranty and Support

La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects

in materials & workmanship. Before returning a product, please contact our friendly customer support with questions or visit our online help:

Phone: 1-608-782-1610

Online Product Support and Registration: www.lacrossetechnology.com/support

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there

is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device must not be co-located or operating in conjunction with any other antenna or transmitter.

Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation.

Caution!

The manufacturer is not responsible for any radio or TV interference caused by unauthorized changes or modiﬁcations to this

equipment. Such changes or modiﬁcations could void the user authority to operate the equipment.

This equipment must be installed and operated in accordance with provided instructions and the antenna(s) used for this transmitter must be installed to

provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter

process without the written permission of the publisher. This booklet may contain errors or misprints. The information it contains is regularly checked and