LC-Power LC-M27-FHD-144-C Manual de Usario

LC-Power Monitor LC-M27-FHD-144-C

Lee a continuación 📖 el manual en español para LC-Power LC-M27-FHD-144-C (12 páginas) en la categoría Monitor. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

LC-M24-FHD-144-C

LC-M27-FHD-144-C

LC-M32-QHD-144-C

LC-M34-UWQHD-100-C

PC gaming monitor series

Thank you for choosing our product. Please read the manual carefully before you use the product.

1. Product overview

1.1 Monitor buttons

1. Power connector: Insert the power cable here.

2. M – menu button: Press to enter the OSD menu or to enter submenus.

3. Down arrow button: Press to move down in the menus.

4. Up arrow button: Press to move up in the menus.

5. E – exit button: Press to exit the menu.

6. Power button: Press to turn the monitor on and off.

7. LED indicator: Changes colour to indicate the status. Refer to chapter 6 for more details.

Note: The E button can also be used to switch between two color gamuts when a compatible

graphics card and either HDMI or DP connections are used.

1.2 Monitor ports (please check if available on your purchased model)

8. Audio output: Connect the audio cable from your computer's audio output to receive the audio signal on

your monitor.

9. DP port: Connect your monitor with the DP (DisplayPort) port of your computer.

10. HDMI port: Connect your monitor with the HDMI port of your computer.

11. DVI port: Connect your monitor with the DVI port of your computer.

2. Stand installation

Keep the foam underneath the monitor before attaching the stand.

1. Open the packaging, take out the product with the foam parts still attached, and gently place it on a

desktop or table. Use the included screwdriver and three no. 1 screws to fasten the base to the stem.

2. Remove the foam covering the back of the monitor, then press the button to remove the stand plate.

Use two no.1 screws to fasten the stand plate to the stem.

3. Insert the stand’s plate into the opening on the back of the monitor. It should click into place. Make sure

the stand is securely attached to the back of the monitor, then remove the remaining foam part from the

monitor and put it on a table or desk.

If needed, the stand can easily be detached from the monitor by pressing the button near the stand

plate. Make sure the monitor is laid on a flat surface before removing the stand.

Especificaciones del producto

Marca:	LC-Power
Categoría:	Monitor
Modelo:	LC-M27-FHD-144-C
Color del producto:	Aluminium
Peso.:	1000 g
Ancho:	120 mm
Profundidad:	190 mm
Altura:	38 mm
Amable:	HDD
versión USB:	3.2 Gen 1 (3.1 Gen 1)
Soporta Windows:	Ja
Interno:	Nee
Sistemas operativos compatibles:	Windows XP, Vista, 7\nMac OS X 10.5, 10.6
Soporta el sistema operativo Mac:	Mac OS X 10.5 Leopard, Mac OS X 10.6 Snow Leopard
Compatibilidad con Mac:	Ja
Conector USB:	USB Type-B
Capacidad del disco duro:	2000 GB
Velocidad de rotación del disco duro:	- RPM
USB:	Ja
Espacio mínimo de almacenamiento en disco:	600 MB
Tamaño del disco duro:	- "
Ratio de transferencia:	5 Gbit/s
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1):	1
Tamaño del búfer de la unidad de almacenamiento:	- MB
Alimentado por autobús:	USB