Legamaster 7-103554 Manual de Usario

Legamaster Pizarra blanca 7-103554

Lee a continuación 📖 el manual en español para Legamaster 7-103554 (2 páginas) en la categoría Pizarra blanca. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Legamaster,

brand of the edding group

Legamaster International B.V., Kwinkweerd 62, Postbus 111, 7240 AC Lochem

T +31 (0)573 71 30 00, F +31 (0)573 71 30 01, www.legamaster.com

Legamaster whiteboards

Cleaning and maintenance

How to start using your Legamaster

whiteboard

Moisten the whole writing surface with

Legamaster board cleaner.

Wipe the board clean with a Micro fibre cloth.

Make sure that your board is dry before you

start writing on it.

Always thoroughly clean the writing surface

before writing on it.

Use markers with sufficient ink in the reservoir

and firmly replace caps after use.

For best results store markers horizontally.

The Legamaster Micro fibre cloth gives the best

result for intensive wet wiping and cleaning.

Original board erasers are a solution for

quickly correcting and (dry) erasing while

writing on the board.

Eraser tissues are advised to be renewed

regularly for an optimal result.

Legamaster board cleaner spray is a solution for

intensive cleaning and wet-erasing in combination

with the Micro fibre cloth. Please ensure you

do not over-moisten the writing surface.

Thoroughly clean the writing surface until all

the ink has been removed and there is no longer

liquid visible on the surface.

Legamaster,

brand of the edding group

Legamaster International B.V., Kwinkweerd 62, Postbus 111, 7240 AC Lochem

T +31 (0)573 71 30 00, F +31 (0)573 71 30 01, www.legamaster.com

BOARD CLEANER

ENVIRONMEN LLY TA

FRIENDLY

NO FUEL GAS

Whiteboard and glassboard cleaner

Whiteboard spray for

regular, thorough cleaning

of whiteboards, planning

boards and glassboards

Quick-drying

TZ 66 Whiteboard cleaning wipes

Moist, lint-free disposable wipes

Perforated tear-off edge;

tissues are dispensed one by one

Dispenser

Moistened with detergent

surfactant in alcohol solution

Quick-drying

TZ 7 125 ml bottle

Ref.no. 7-121200

TZ 8 250 ml bottle

Ref.no. 7-121300

100 tissues

Ref.no. 7-121400

TZ 6 150 ml can

Ref.no. 7-121000

Legamaster whiteboards

Cleaning and maintenance

Permanent marker on your enamel steel whiteboard surface?

MagicWipe thoroughly cleans your board and is the perfect solution

for stubborn stains, including ink from permanent markers.

For intensive whiteboard cleaning

Specifically for use on enamel board surface

Wipes away the toughest marks and stains,

even permanent marker ink

Ready to use: only requires a drop of water

or Legamaster whiteboard cleaner

Material: micro fibre, washable at 60 °

Environmentally friendly: 100% recyclable

Contents: 2 MagicWipes + 1 drying towel

MagicWipe

For enamel steel

boards only.

Magnetic whiteboard eraser

Ref.no. 7-120300

Eraser pads

Ref.no. 7-120400

Small whiteboard eraser

Ref.no. 7-120100

Refill tissues

Ref.no. 7-120200

Best solution for intensive wet wiping

and cleaning

Even removes ghost writing and ink stains

All you need is water or, for best result,

use Legamaster whiteboard and glassboard

cleaner – no other solvents required

Dimensions 40 x 40 cm

Withstands wash cycles up to 60 degrees

BOARD ERASERS

When using a whiteboard intensively; cleaning (older) ink stains can be a challenge. The cloth removes the

“ghost writing” which occurs when the volatile components of the ink leave “ghost writing” on the board.

Even when using a dry Micro fibre cloth this “ghost writing” mostly disappears. Additionally the cloth takes up

the ink pigments; preventing them from being wiped over the board again. Last but not least: After usage the

cloth can simply be washed in the washing machine!

Microfibre cloth

40 x 40cm – 2 pcs

Ref.no. 7-121700

Whiteboard eraser TZ 4

Ref.no. 7-120500

Refill tissues

Ref.no. 7-120600

Especificaciones del producto

Marca:	Legamaster
Categoría:	Pizarra blanca
Modelo:	7-103554
Color del producto:	Wit
Peso.:	3800 g
Ancho:	276 mm
Profundidad:	356 mm
Altura:	304 mm
Ancho del embalaje:	340 mm
Empaquetadura en profundidad:	325 mm
Altura del embalaje:	405 mm
Amable:	PC
factor vorm:	Mini Tower
Interruptor-encendido-/-apagado:	Ja
Número de puertos USB 2.0:	1
Adecuado para:	Gamen
Ubicación de la iluminación:	Case fans
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	1
Puerto combinado para auriculares/micrófono:	Ja
Botón de reinicio:	Ja
factor de vorm SSD:	2.5"
Fuente de alimentación incluida:	Nee
Número de bahías de 2,5":	3
Número de bahías de 3,5":	2
Tamaños de disco duro admitidos:	2.5, 3.5 "
Número de ranuras de expansión:	4
Gestión de cables mejorada:	Ja
Número de unidades de almacenamiento admitidas:	5
Exposición:	Ja
Factores de forma de placa base compatibles:	Micro ATX, Mini-ITX
Ventana lateral:	Ja
Placa(s) de vidrio templado:	Ja
Altura máxima del refrigerador de la CPU:	160 mm
Longitud máxima de la tarjeta gráfica:	340 mm
Número máximo de ventiladores frontales:	2
Diámetros de soporte de ventiladores frontales:	120 mm
Número máximo de fans en la cima.:	4
Diámetros de soporte de ventiladores superiores:	120 mm
Número máximo de ventiladores traseros:	1
Diámetros de soporte de ventiladores traseros:	120 mm
Ventiladores traseros instalados:	1x 120 mm
Número de ventiladores frontales instalados:	1x 120 mm
Número máximo de ventiladores inferiores:	2
Diámetros de soporte de ventiladores inferiores:	120 mm
Número de bahías internas de 3,5":	2
Dimensiones del radiador trasero soportado:	120 mm
Dimensiones del radiador lateral soportado:	120,240 mm
Refrigeración líquida instalada:	Ja