Leica Lino ML90 Manual de Usario

Leica medidor de distancia láser Lino ML90

Lee a continuación 📖 el manual en español para Leica Lino ML90 (28 páginas) en la categoría medidor de distancia láser. Esta guía fue útil para 4 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/28

Leica Lino

ML90, ML180

1Start up

Leica Lino ML series 785880c en

User Manual

Version 785880b

English

Congratulations on your purchase of the Leica Lino

ML Series.

Before starting up the instrument

for the first time, please read

through the entire User Manual

paying special attention to the

section "Safety instructions".

Contents

Start up.................................................................. 1

Interface ................................................................4

Operation .............................................................. 5

Working with receivers ........................................... 9

Checking the accuracy .......................................... 16

Technical data ...................................................... 19

Care and transport ............................................... 21

Safety instructions ............................................... 23

Warranty .............................................................. 27

Start up

Inserting / replacing batteries

1 Lino ML90/180: Turn the release screw on the

battery compartment a 1/4 turn (clock wise) with

the help of a coin or a flat head screw driver to

unlock the battery compartment.

2 Open the battery compartment cover and insert

the batteries, observing the correct polarity.

XCR Catch:

RVL100:Lino ML90/180:

Start up Leica Lino ML series 785880c en

3 Insert the battery compartment cover on the

bottom side first and then insert the compart-

ment completely until it is fully closed.

4 Then lock the compartment by turning the release

screw a 1/4 turn (counter clock wise).

The battery symbol 6 lights up when the

battery voltage is too low. Replace the batteries as

soon as possible.

• Insert the batteries observing the correct polarity

• Use alkaline batteries or rechargeable batteries

only.

• Remove the batteries if the instrument is not to

be used for a long period of time (to prevent

corrosion).

Charging the rechargeable battery

pack / first-time use

• In case that your Lino ML is equipped with a

rechargeable battery pack you can recharge the

battery pack with the supplied Lino ML charger

(Art Nr. 784967) by connecting the charger to the

jack on the battery door.

• The battery must be charged prior to first use

because it is delivered with as low an energy

content as possible.

• A full charging cycle takes 8 hours and the

charging will automaticly stop after a full cycle.

Each time the charger is connected to the unit a

charging cycle will be initiated. See also battery

status indications on the interface in section

"Interface" on page 4.

• The permissible temperature range for charging is

between 0°C and +40°C/+32°F and +104°F. For

optimal charging we recommend charging the

batteries at a low ambient temperature of +10°C

to +20°C/+50°F to +68°F if possible.

• It is normal for the battery to become warm

during charging.

Especificaciones del producto

Marca:	Leica
Categoría:	medidor de distancia láser
Modelo:	Lino ML90
Color del producto:	Wit
Peso.:	810 g
Ancho:	119.5 mm
Amable:	IP-beveiligingscamera
Código de seguridad internacional (IP):	IP66
factor vorm:	Dome
Soporte de colocación:	Buiten
Tecnología de conectividad:	Bedraad
Método de montaje:	Muur
Resolución Máxima:	1280 x 960 Pixels
Número total de megapíxeles:	1.3 MP
Diámetro:	145 mm
Tipo de fuente de energía:	DC
Salida de corriente (amperios):	0.25 A
Iluminación mínima:	0.1 Lux
Número de cámaras:	1
Disco duro incorporado:	Nee
Vision nocturna:	Ja
tipo LED:	IR
Rango focal:	2.8 - 12 mm
Tamaño del sensor óptico:	1/3 "
Relación señal-ruido:	60 dB
Alcance de visión nocturna:	20 m
Número de iluminación LED:	35
Temperatura de funcionamiento (TT):	-10 - 50 °C