LevelOne GNC-0120 Manual de Usario

LevelOne Tarjeta/adaptador de red GNC-0120

Lee a continuación 📖 el manual en español para LevelOne GNC-0120 (10 páginas) en la categoría Tarjeta/adaptador de red. Esta guía fue útil para 11 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/10

FNC / GNC Quick Installation Guide

CAUTION: Turn oﬀ and unplug the power before removing the computer's cover. Failure to do so could

endanger you and may damage the adapter or computer.

1. Turn off the computer and unplug the power cord. For Hot Plug servers, see your server documentation

ﬁrst.

2. Remove the cover bracket from a PCI-Express slot (v1.0a or newer) or a PCI (2.2 or later) slot. If you

have conﬁguration problems, see your computer's documentation to determine if the PCI-Express or PCI

slots are bus master-enabled.

3. Optional step for low proﬁle capable models:

If you need to install the adapter in a low proﬁle PCI-Express or PCI chassis, ﬁrst replace the adapter

standard bracket with the supplied low proﬁle bracket. To remove existing bracket, unscrew the two

screws as shown at right and then pull bracket off. Reverse the process to attach the low proﬁle bracket.

See the User’s Guide (step 8) for complete instructions.

4. Firmly insert the adapter into the selected slot. Push down to ensure the adapter is fully seated. If you

install the adapter in a PCI-Express or PCI slot, make sure the exposed end of the connector does not

touch any part of the motherboard. Secure the bracket to the chassis.

5. Replace the computer cover and plug in the power cord.

6. Connect the network cable Copper Modles

a. For 10Gbps opercation(10GBase-T),use category 6 or better(must be 4-pair wiring with different pitches

b. Insert the twisted pair,RJ45 network connector as shown.

c. For 1000Mbps operation(1000BaseT),use Category 5 or better (must be 4-pair wiring). Make sure you

use Category 5 cable that complies with the TIA-568 wiring speciﬁcation.

d. For 100Mbps operation(100BaseTX), use Category 5 wiring or better.

Length is limited to 100 meters.

The adapter must be connected to a compatible link partner that has the same conﬁguration.

PCI-E Slot

PCI Slot

Singe-Port Models

Dual-Port Models

Quad-Port Models

Fiber Models

a. For ﬁber adapters, remove and save the ﬁber optic connector cover. Insert a matching ﬁber optic

connector into the ports on the adapter as shown. Note: For LC adapters, converter patch cables are

available to allow plugging into an SC type connector.

b. The SX type adapters must use SX compatible cabling (see table showing maximum reach) and the LX

type adapter must use LX compatible cabling. Cabling and adapter types cannot be mixed. Note: the LX

adapter has LX stamped on the bracket to identify it. See the Use’s Guide on the CD for more

information on cable type

c. Most connectors and ports are keyed for proper orientation. If the cable you are using is not keyed,

check to be sure the connector is oriented properly.

d. The adapter must be connected to a compatible link partner, or an IEEE 802.3z- compliant gigabit

switch.

Fiber Cable Type

MM 62.5u

MM 50u

SM 9.0u

10GBase-SR Type

(850nm)

N/A

300M

N/A

10GBase-LR Type

(1310nm)

N/A

10KM

1000Base-SX Type

(850nm)

275M

550M

N/A

1000Base-LX Type

Adapter(1310nm)

N/A

10KM

100Base-SX Type

(1310nm)

2KM

N/A

100Base-LX Type

(1310nm)

N/A

20KM

Optical ﬁber connection diagram

Single-port ﬁber adapter with LC connector

Especificaciones del producto

Marca:	LevelOne
Categoría:	Tarjeta/adaptador de red
Modelo:	GNC-0120
Colocación del dispositivo:	Vrijstaand
Peso.:	53000 g
Ancho:	600 mm
Profundidad:	600 mm
Altura:	845 mm
Impuesto neto:	2400 W
Número de cubiertos:	13 couverts
Color de la puerta:	Roestvrijstaal
Longitud del cable:	1.7 m
Temporizador de inicio retrasado:	Ja
Retraso del inicio:	24 uur
Indicación de tiempo restante:	Ja
Bloqueo infantil:	Ja
clase de secado:	A
Duración del ciclo:	180 min
Nivel de ruido:	44 dB
Consumo-anual-de-energía:	262 kWu
Peso del embalaje:	51000 g
Clase de eficiencia energética (antigua):	A++
Consumo de agua por ciclo:	6.5 l
Número de programas de lavado:	6
Profundidad cuando la puerta está abierta.:	1155 mm
Dimensiones del paquete (AnxPrxAl):	660 x 680 x 900 mm
Tipo de compartimento Bestek:	Mand
Filtro autolimpiante:	Ja
Número de ajustes de temperatura:	6
Función AquaStop:	Ja
Función AquaSensor:	Ja
Programas de lavado:	Eco, Intensive, Pre-rinse, Pre-wash, Quick
Consumo de energía por ciclo:	0.92 kWu
Consumo anual de agua:	1820 l
Longitud de la manguera de drenaje:	1.7 m
Longitud de la manguera de suministro de agua:	1.4 m
voltaje-de-entrada-de-CA:	220 - 240 V
Frecuencia-de-entrada-de-CA:	50 - 60 Hz
Programas-de-lavado:	Voorwassen
lavar rapido:	Ja