Liftmaster 374UT Manual de Usario

Lee a continuación 📖 el manual en español para Liftmaster 374UT (16 páginas) en la categoría No categorizado. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
To prevent possible SERIOUS INJURY or DEATH from a moving gate or door:
• ALWAYSkeepremotecontrolsoutofreachofchildren.NEVERpermitchildrentooperate,orplaywithremotecontrol
transmitters.
• ActivategateordoorONLYwhenitcanbeseenclearly,isproperlyadjustedandtherearenoobstructionstodoortravel.
• ALWAYSkeepgateordoorinsightuntilcompletelyclosed.NEVERpermitanyonetocrosspathofmovinggateordoor.
Universal Mini Remote Control
Read instructions thoroughly BEFORE beginning.
If using the Universal Mini Remote Control with residential door openers, the remote control must be used only
with door openers manufactured after 1993 that utilize photoelectric sensors. The photoelectric sensors are
always located on or near the bottom of the door track.
STOP
MODEL 374UT
TABLE OF CONTENTS
GETTING STARTED .................................................... 2
LOCATE THE PROGRAM/LEARN BUTTON ........................3-7
Chamberlain® products ............................................. 3
Genie® products ..................................................... 4
Linear® products ..................................................... 5
Wayne Dalton® products ........................................... 5
LiftMaster® products ................................................ 6
Overhead Door®
products .......................................... 6
Stanley®
products ................................................... 7
GARAGE DOOR OPENERS ..........................................8-9
Programming to a garage door opener with a
Program/LEARN button ............................................. 8
Programming to a Genie® Intellicode® 2
garage door opener ................................................. 9
Programming to a LiftMaster garage door opener using
the LEARN button on the control panel ......................... 10
COMMERCIAL DOOR OPERATORS .................................11
Programming to a commercial door operator
with a RADIO button................................................11
GATE OPERATORS ....................................................12
Program to a gate operator
with a Program/LEARN button ....................................12
EXTERNAL RECEIVERS ...............................................13
Programming to an external receiver
with a Program/LEARN button ....................................13
MYQ® LIGHT CONTROLS ............................................14
Programming to a MyQ® Light Control ..........................14
NEED HELP? ...........................................................15
BATTERY 16 ...............................................................
2
gETTing STaRTED
The Universal Mini Remote Control can be programmed to activate up to two products, such as a garage door opener, MyQ® light
control, gate operator, or commercial door operator. Each button on the remote control works independently of the other and must
be programmed separately. The images throughout this manual are for reference only and your product may look different.
Bottom Button
Garage Door Opener Commercial Door OperatorGate Operator
LED
You will need to locate the Program/LEARN button on your product before you start programming.
GARAGE DOOR OPENERS
TheProgram/LEARNbuttonistypicallylocatedonthebackorsidepanel
ofyourgaragedooropener.YourProgram/LEARNbuttonmayhavea
differentname(SMARTbutton,SETbutton,etc.).Forhelplocatingyour
Program/LEARNbuttonrefertotheTableofContentsinthismanualor
contactyourgaragedooropenermanufacturer.
COMMERCIAL DOOR OPERATORS
TheRADIObuttonistypicallylocatedonthelogicboardofyouroperator.
ForhelplocatingyourRADIObuttoncontactyourdooroperator
manufacturer.
GATE OPERATORS
TheProgram/LEARNbuttonistypicallylocatedonthecontrolboardof
youroperator.YourProgram/LEARNbuttonmayhaveadifferentname
(RADIObutton,XMITTERbutton,etc.).ForhelplocatingyourProgram/
LEARNbuttoncontactyourgateoperatormanufacturer.
EXTERNAL RECEIVER
Someproductsdonot
haveaProgram/LEARN
button.Inthiscase,the
Program/LEARNbutton
willbelocatedinan
externalreceiver.The
receiverwillbelocatedon
theproductormounted
nearby.Followthe
programminginstructions
foranexternalreceiver.
3
LOCaTE ThE PROgRaM/LEaRn BUTTOn
ChaMBERLain PRODUCTS

Especificaciones del producto

Marca: Liftmaster
Categoría: No categorizado
Modelo: 374UT

¿Necesitas ayuda?

Si necesitas ayuda con Liftmaster 374UT haz una pregunta a continuación y otros usuarios te responderán




No categorizado Liftmaster Manuales

No categorizado Manuales

Últimos No categorizado Manuales