Lorex LNB8963B Manual de Usario

Lorex Cámara de vigilancia LNB8963B

Lee a continuación 📖 el manual en español para Lorex LNB8963B (2 páginas) en la categoría Cámara de vigilancia. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Resources

• You can use a RJ45 coupler or switch (not included) to connect male

ends of Ethernet cable together.

• To extend the cable run beyond 300ft (92m), a switch will be required

(sold separately).

LNB8963_LNB8973_QSG_EN_R1

4K Motorized Varifocal HD IP Bullet

Security Camera

• 4K Motorized Varifocal HD IP Bullet Security Camera

• 4× Mounting Screws & Drywall Anchors*

• CAT5e Ethernet Extension Cable with Pre-attached RJ45

Cable Gland*

• Allen Key*

• Mounting Template*

• Read this guide carefully and keep it for future reference.

• Follow all instructions for safe use of the product and handle with care.

• Use the camera within given temperature, humidity and voltage levels

noted in the camera’s speciﬁcations.

• Do not disassemble the camera.

• Do not point the camera directly towards the sun or a source of

intense light.

• Use only the supplied regulated power supply provided with the

product. Use of a non-regulated, non-conforming power supply can

damage the product and void the warranty.

• Periodic cleaning may be required. Use a damp cloth only. Do not use

any harsh, chemical-based cleaners.

• The supplied cable is rated for surface mounting only. Cables for

in-wall and ﬂoor-to-ﬂoor installations are sold separately (CMR type).

These and other cables are available at lorex.com

• Point the camera where there is the least amount of obstructions

(i.e., tree branches).

• Install the camera where vandals cannot easily reach.

• Secure cabling so that it is not exposed or easily cut.

• This camera is rated for outdoor use. Installation in a sheltered

location is recommended.

* Per camera in multi-camera packs.

As our products are subject to continuous improvement, Lorex reserves

the right to modify product design, speciﬁcations and prices, without

Quick Start Guide

English Version 1.0

LNB8963 / LNB8973 SERIES

Package Contents

ATTENTION:

It is recommended to connect the camera to the NVR or an external PoE

switch. If using a DC power adapter (not included) with the camera, a

REGULATED power supply is REQUIRED for use with this camera. Use of

a non-regulated, non-conforming power supply can damage this product

and voids the warranty.

Safety Precautions

Installation Tips

Dimensions

10.8” / 273mm

3.7” / 95mm

Need Help?

Visit us online for up-to-date software

and complete instruction manuals

Click on the Downloads tab

Visit lorex.com

Search for the model number

of your product

Click on your product in the

search results

www.lorex.com

Extend the cable run for your camera. Additional extension cables sold

separately. See table below:

Cable Extension Options

Cable Type Max Cable Run

Distance

Max # of

Extensions

CAT5e (or higher) Ethernet cable 300ft (92m) 3

• For a full list of compatible recorders, visit lorex.com/compatibility

• Not intended for submersion in water. Installation in a sheltered

location recommended.

Disclaimers

CAT5e

Ethernet

Extension

Cable

RJ45 Cable Gland

Using the RJ45 Cable Gland (Optional)

The RJ45 cable gland is pre-attached to the

included CAT5e ethernet extension cable.

The RJ45 cable gland covers the camera’s Ethernet connector and the RJ45 plug to

provide weather-resistance and protection from dust, dirt and other environmental

contaminants.

To use the RJ45 cable gland:

RJ45 Cable

Gland Barrel

Camera Ethernet

Connector

NOTE: The RJ45 cable gland is weather-resistant. Seal the cap with silicone and/or

electrical tape for additional sealing if it will be exposed to precipitation regularly.

Twist the RJ45 cable gland barrel securely onto the camera Ethernet connector.

OPTION 1 - NVR Interface:

Right-click on the camera’s live view

and then click AutoFocus. Use the

sliders to adjust zoom & focus.

OPTION 2 - Manual Zoom In / Out:

Use the included Allen key to open the compartment cover. Press T to

zoom in and to zoom out.W

Adjusting Zoom & Focus

To install your camera:

1. Use the included mounting template to mark holes for the

mounting screws and camera cable.

2. Drill holes for the mounting screws and camera cable

NOTE: Use the included drywall anchors if needed.

3. Connect cables as shown in the section “Connecting the

Camera”.

4. Attach the camera base to the mounting surface using the

included mounting screws (4×).

Installing the Camera

Connect the Ethernet cable to

the camera.

Connect the other end of the

Ethernet cable to the NVR’s PoE

ports. The camera may take a

minute to power up after

being connected.

Connecting the Camera

Cable Notch

LNB8963_LNB8973_QSG_EN_R1

Problem Solution

No picture / signal • Ensure the camera is connected to a compatible NVR.

For full camera compatibility, visit

lorex.com/compatibility.

• The camera may take up to 1 minute to power up after

being connected to the NVR. Wait two minutes before

following the steps below.

• Ensure the camera is connected to your NVR or to your

local network.

• If you are not using PoE, you must connect the camera

to a 12V DC power adapter (not included).

• If the camera is connected to the LAN, you must search

your network for cameras using the NVR. See the NVR’s

instruction manual.

• Ensure your NVR is properly connected to a TV/monitor.

• There may be an issue with your extension cable run.

Connect the camera to the NVR using a different

Ethernet cable.

Picture is too bright • Ensure your camera isn’t pointed directly at a source of

light (e.g., sun or spot light).

• Move your camera to a different location.

• Check the brightness and contrast settings on the NVR.

Picture is too dark • Check the brightness and contrast settings on the NVR.

Night vision is not

working

• The night vision activates when light levels drop. The

area may have too much light.

Picture is not clear • Check the camera lens for dirt, dust, spiderwebs. Clean

the lens with a soft, clean cloth.

• Make sure that the cable run is within the limitations

speciﬁed in the section ‘Cable Extension Options’.

Bright spot in

video when viewing

camera at night

• Night vision reﬂects when pointing a camera through a

window. Move the camera to a different location.

Picture is in color in

dark conditions

• This camera comes with an image sensor that is extra

sensitive to light, meaning that the camera stays in color

mode at low-light conditions. For instructions on how to

make your camera switch to night mode, visit

lorex.com, and search for “How do I make my camera

switch to night mode?”

Troubleshooting

ATTENTION:

Test your camera prior to selecting a permanent mounting location by

temporarily connecting the camera and cable to your NVR.

Before Installing the Camera

• Decide whether to run the cables through the wall / ceiling (drilling

required) or along the

wall / ceiling.

• If you run the cables along the

wall / ceiling, you must run the

cable through the on cable notch

the base. This will keep the camera

base ﬂush to the surface when mounted.

ATTENTION:

This camera includes an Auto Mechanical IR Cut Filter. When the camera

changes between Day/Night viewing modes, an audible clicking noise may

be heard from the camera. This clicking is normal, and indicates that the

camera ﬁlter is working.

Connect the other end of the

Ethernet cable to a router or

switch on your network. See

your NVR manual for details on

connecting the camera to your

NVR using a switch or router.

Camera NVR

Setup Diagram

CameraHD NVR

Scenario 1: Connect Cameras to NVR

Scenario 2: Connect Cameras to Local Area Network (LAN)

Router

Camera

HD NVR

Router

PoE Switch

(Optional)

12V DC Power

ATTENTION:

• This camera is only compatible with select NVRs. For a list of

compatible recorders, visit lorex.com/compatibility

• You must connect the camera to a supporting H.265 NVR to take

advantage of H.265 compression. For instructions on enabling

H.265 compression, visit lorex.com, and search for “How do I

enable H.265 compression?”.

Ethernet Cable

NOTES:

• For weatherprooﬁng instructions,

see “Using the RJ45 Cable Gland

(Optional)”.

• A 12V DC power adapter (model#:

ACCPWR12V2A, not included) is

only required if connecting the

camera’s Ethernet cable to a

router or switch that does not

support PoE.

5. Use the included Allen key to loosen the adjustment screw

on the camera base. Make the necessary camera angle

adjustment.

6. Tighten the adjustment screw when ﬁnished.

7. Remove the vinyl ﬁlm from the camera lens when your

installation is complete.

Adjustment

screw

Mounting

surface

Mounting

screws (4×)

Drywall

anchors (4×)

Camera

base

Resetting the Camera

1. Use the included Allen key to open the compartment cover.

2. Press and hold the button for 5 seconds using a thin object to reset

the camera to default settings.

Especificaciones del producto

Marca:	Lorex
Categoría:	Cámara de vigilancia
Modelo:	LNB8963B
Color del producto:	Zwart
Peso.:	1950 g
Ancho:	246.2 mm
Profundidad:	32.2 mm
Altura:	263.4 mm
Peso del embalaje:	2100 g
Ancho del embalaje:	350 mm
Empaquetadura en profundidad:	90 mm
Altura del embalaje:	310 mm
Bluetooth:	Ja
Frecuencia del procesador:	2 GHz
Familia de procesadores:	Intel® Core™ i5
Modelo de procesador:	i5-10400T
Número de núcleos de procesador:	6
Versión Bluetooth:	5.2
red LAN:	Ja
Nombre del color:	Zwart
Número de puertos USB 2.0:	2
Número de puertos HDMI:	1
Micrófono, entrada de línea:	Ja
Número de puertos Ethernet LAN (RJ-45):	1
Salidas de auriculares:	1
Certificación:	cTUVus, FCC, FCC ID, IC ID, CE, RED, CB, BSMI, NCC, RoHS, ErP, REACH, WEEE
Suministro de red:	- W
Memoria interna:	8 GB
Medios de almacenamiento:	SSD
Tipo de memoria interna:	DDR4-SDRAM
Versión HDMI:	2.0
Certificados de sostenibilidad:	CE, ErP, REACH, RoHS, WEEE
Número de DisplayPorts:	1
Software incluido:	myViewBoard for Window /Adobe reader /Winflash /Watch Dog
Estándar Wi-Fi:	Wi-Fi 6 (802.11ax)
LAN Ethernet, velocidades de transferencia de datos:	10,100,1000 Mbit/s
Número de puertos USB 3.2 Gen 1 (3.1 Gen 1) Tipo A:	4
Caché del procesador:	12 MB
Fabricante del procesador:	Intel
Configurar TDP-down mínimo:	25 W
Frecuencia de bajada de TDP configurable:	1.3 GHz
Memoria interna máxima:	8 GB
Capacidad total de almacenamiento:	256 GB
Tipo de unidad óptica:	Nee
Adaptador de gráficos incorporado:	Ja
Adaptador de gráficos separado:	Nee
Adaptador de gráficos integrado familiar:	Intel® UHD Graphics
Modelo de adaptador de gráficos integrado:	Intel® UHD Graphics 630
Número de puertos USB 3.2 Gen 2 (3.1 Gen 2) Tipo C:	1
Tecnología Intel SpeedStep mejorada:	Ja
Ejecutar bit de desactivación:	Ja
Estados inactivos:	Ja
Configuración de CPU (máx.):	1
Intel® VT-x con tablas de páginas extendidas (EPT):	Ja
Opciones integradas disponibles:	Nee
Intel® 64:	Ja
Tecnología de virtualización Intel® para E/S dirigida (VT-d):	Ja
Tecnología Intel® Clear Video:	Ja
Extensiones de protección de software Intel® (Intel® SGX):	Ja
Tecnología de virtualización Intel® (VT-x):	Ja
Tecnología de ejecución confiable Intel®:	Nee
Programa de plataforma de imagen estable Intel® (SIPP):	Nee
Frecuencia turbo máxima del procesador:	3.6 GHz
Modelo de adaptador de gráficos discretos:	Niet beschikbaar
Número de SSD instalados:	1
Capacidad SSD:	256 GB
Tipo de vivienda:	Slot-in PC
factor de vorm SSD:	M.2
interfaces SSD:	PCI Express, SATA III
SSD de capacidad total:	256 GB
placa base con chipset:	Intel H410
Incluye monitor:	Nee
Fuente de alimentación, entrada de voltaje.:	110 - 240 V
Wifi.:	Ja
Temperatura de funcionamiento (TT):	-5 - 45 °C
Humedad relativa de funcionamiento (VV):	10 - 90 procent
Tipo-producto:	Mini PC
Frecuencia de entrada de la fuente de alimentación:	50 - 60 Hz
Código del Sistema Armonizado (SA):	84715000
Generación de procesador:	Intel® 10de generatie Core™ i5
Fabricante interno de GPU:	Intel