LYYT LT245120-WW Manual de Usario

LYYT No categorizado LT245120-WW

Lee a continuación 📖 el manual en español para LYYT LT245120-WW (2 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

HIGH OUTPUT LED TAPE

Installation Guide

V2 .0

Caution: Please read this guide carefully before installing Lyyt LED tape

Damage caused by incorrect application is not covered by the warranty

Installation

Lyyt high output LED tape is supplied on 5m reels and operates from a 24Vdc power supply.

Installation should be carried out by competent electrical installers, observing the relevant electrical safety procedures.

The tape has a self-adhesive backing to allow it to be easily attached to a clean, non-porous surface.

Where less than 5m of tape is needed, there are solder points as shown below, where the tape may be cut to size. These

cut points will be at 5cm intervals. In order to re-connect to another length of tape after cutting, strip away the epoxy

coating at the solder points and solder a wire from “+” to “+” and a wire from “ ” to “ ” as shown below. - -

Some accessories are supplied with the tape reel for this purpose or alternatively, connection clips may also be used Lyyt

to join lengths of tape (156.135UK 156.140UK). In order to retain weather-proofing, it is advised to seal the cuts and –

joints with silicone glue.

Each 5m reel of single colour LED tape is fitted with a 2.1mm DC jack socket for power input for easy connection to a

power supply. This connector may be removed and stripped for bare wire connection if a 2.1mm jack is not fitted to the

power supply.

If the power supply has enough capacity to power more than one reel, another reel can be connected to the end of the

first reel via the 2.1mm DC jack plug.

For Lyyt high output LED tape, it is recommended to link no more than 15m of tape in sequence .

Using a separate wire to loop “+” and “ ” back to the power supply will help to avoid dimming at the far end through -

voltage drop.

To connect beyond these lengths, a parallel wire must be run from the power supply to the further reels of tape.

High Output LED Tape Installation Guide

Power requirements

It is imperative that the power supply should have higher than the rated capacity in Amps (A) for the current required to

power the length(s) of LED tape installed. Please see the table below for reference.

Tape length

10m

15m

20m

25m

30m

Current

10A

12A

Suggested PSU

153.759UK

153.760UK

153.761UK

153.762UK

153.763UK

153.764UK

Lyyt high output LED strips can also be operated with Lyyt single colour 12/24V controllers, amplifiers or dimmers.

Specifications

Stock ref.

156.776UK

156.777 UK

156.778UK

Colour

Warm white (3000K)

Natural white (6000K)

Cool white (6000K)

Number of LEDs

120/m

Beam angle

140°

Cut intervals

5cm

Reel length

LED type

Epistar™ SMD3528

LED spacing

8.3 mm

IP rating

IP65

Power consumption / metre

9.6W

Luminous flux (Lumens per metre)

720lm/m

Light intensity per LED

2400mcd

Cross-section

10.5 x 2.55mm

Weight

210g

Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical or

Electronic equipment and should not be disposed with other household or commercial waste at the end of its useful life .

The goods must be disposed of according to your local council guidelines.

Errors and omissions excepted.

Especificaciones del producto

Marca:	LYYT
Categoría:	No categorizado
Modelo:	LT245120-WW
Tipo de operación:	Hefboom
Color del producto:	Zilver
Pantalla incorporada:	Nee
Peso.:	4400 g
Ancho:	522 mm
Profundidad:	286 mm
Altura:	174 mm
Impuesto neto:	133 W
Longitud del cable:	1 m
Nivel de ruido:	64 dB
Clase-de-eficiencia-energética:	C
Consumo-anual-de-energía:	70 kWu
Peso del embalaje:	5400 g
Ancho del embalaje:	605 mm
Empaquetadura en profundidad:	305 mm
Altura del embalaje:	370 mm
Amable:	Inbouw
Potencia del motor:	115 W
Diámetro de la conexión de escape:	150 mm
iluminancia:	100 Lux
Motor incluido:	Ja
Número de motores:	1
Capacidad máxima de extracción:	305 m³/uur
Método de extracción:	Luchtafvoer
Clase de eficiencia fluidodinámica:	D
Clase de eficiencia lumínica:	D
Clase de eficiencia del filtro de grasa:	C
Nivel de ruido (baja velocidad):	55 dB
Distancia mínima a la placa eléctrica:	500 mm
Distancia mínima a la encimera de gas:	650 mm
Número de lámparas:	2 gloeilamp(en)
Tipo de lámpara:	LED
Tipo filtro veterinario:	Aluminium
Filtro lavable:	Ja
Altura (mín.):	208 mm
Lámpara de encendido:	4 W
Nivel de ruido (alta velocidad:	66 dB
Filtro extraíble:	Ja
Número de filtros:	1 stuk(s)
Número de velocidades:	3
modo intensivo:	Nee
Nivel de ruido (velocidad media):	60 dB
Ubicación del escape:	Boven
Druk (Pa):	143
voltaje-de-entrada-de-CA:	220 - 240 V
Frecuencia-de-entrada-de-CA:	50 Hz
Sistema de seguimiento automatizado de clasificación de productos básicos (CCATS):	84146000