M-Audio FireWire Solo Manual de Usario

M-Audio No categorizado FireWire Solo

Lee a continuación 📖 el manual en español para M-Audio FireWire Solo (20 páginas) en la categoría No categorizado. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/20
User’s Guide • Guide de l’utilisateur • Benutzerhandbuch •
Manual del usuario • Manuale dell’utente •
1
Introduction
Thank you for choosing the M-Audio FireWire Solo. The FireWire Solo has been designed to give you a professional, portable audio interface for
your laptop or desktop computer. Using the convenience and dependability of the IEEE-1394 (FireWire™) bus, the FireWire Solo provides your
computer with a high-performance, high-resolution audio interface, complete with microphone, instrument and line-level inputs, in a rugged,
lightweight, and highly portable design.
The FireWire Solo was created with portability and versatility in mind. Offering professional 24-bit audio quality in a durable and mobile design,
the FireWire Solo is the perfect interface for your FireWire (IEEE 1394) equipped computer. Add a pair of M-Audio’s DX4 Desktop Monitors, our Nova
microphone and your guitar, and you’ve got all you need to compose and record your music.
Even if you are an experienced musician and digital recording enthusiast, we recommend you take a few moments to read through this owners’
manual and familiarize yourself with the FireWire Solo’s features and operation. You may also want to refer to your audio software’s documentation,
to better understand how the FireWire Solo’s features are integrated with the audio program. Your experience and enjoyment of your FireWire Solo
will be greatly enhanced by a good working knowledge of your audio software.
Whats in the Box
Your FireWire Solo package contains the following:
< FireWire Solo Recording Interface
< CD-ROM containing driver software and user manual in PDF form
< Printed Quick Start Guide
< IEEE 1394 (FireWire) cable – 6 pin to 6 pin
< IEEE 1394 (FireWire) cable – 6 pin to 4 pin
< 12VDC 1A Power Supply
About the FireWire Solo
The FireWire Solo is equipped with a front panel Microphone (XLR) input, front panel Instrument (1/4”)
input, and two rear panel line inputs, as well as two rear panel line outputs. The Mic and Instrument
inputs each have their own dedicated level controls. A front panel switch is provided to select the front
(Mic and Instrument) or rear (line) inputs. With additional rear panel S/PDIF digital inputs and outputs, the
FireWire Solo can function as a four-input, four-output audio interface. A single IEEE 1394 cable connects
the FireWire Solo to your computer’s FireWire port. If your computer is not equipped with a native FireWire
port, you may purchase a FireWire PCI card at any computer electronics retailer.
The FireWire Solo can deliver high-quality analog and digital I/O in full 24-bit resolution, at sampling rates
up to 96 kHz for recording and playback. Its S/PDIF digital I/O supports output of AC3 and DTS-encoded
multichannel digital audio under Windows and Mac OS 10.3.5.
IMPORTANT: The FireWire Solo comes with a high-quality six-pin to six-pin FireWire cable. We strongly
suggest you use this cable, or one of equal quality, for optimum audio performance. If your computer is
equipped with a four-pin interface, you will need to use the included four-pin to six-pin FireWire cable.
Note that the FireWire Solo requires a six-pin FireWire connection in order to supply bus power; if you have
a four-pin connection you will need to use the supplied power adapter.
NOTE: Some computer manufacturers may use a different nomenclature to refer to their FireWire connections, such as Sony’s “iLink”, or simply
“1394.” When in doubt, consult your computer owner’s manual.
IMPORTANT - IEEE 1394 “FireWire” Users: Reports have come to our attention of isolated problems when hot-plugging IEEE 1394 (aka “FireWire”)
devices. Hot-plugging refers to making IEEE 1394/FireWire connections when one or more of the devices is powered on (including the computer).
There have been rare occurrences when, after hot-plugging, either the FireWire peripheral or the host computer’s FireWire port are rendered
permanently inoperable. While M-Audio products adhere rigidly to the FireWire industry standard and pass stringent internal testing, the possibility
remains that hot-plugging your M-Audio FireWire interface to some computers may result in this type of problem.
We strongly encourage you to protect your equipment by refraining from hot-plugging any bus-powered FireWire device, including the M-
Audio family of FireWire products. Only connect your FireWire device while both the computer and FireWire device are powered off. Power
on the FireWire device first, and then turn the computer on last. If you are using bus power (on systems with IEEE 1394 6-pin connectors), make
sure to make the cable connection first, and turn the computer system on last.
M-Audio is being proactive in investigating any issues that may adversely affect our customers. Please consult the Knowledge Base in the
Support section at www.m-audio.com for updates on this important issue.
2
Features
< Front panel balanced XLR mic input with switchable phantom power and dedicated gain control
< Front panel unbalanced guitar/instrument 1/4” input with dedicated gain control
< Switchable rear panel unbalanced 1/4” line inputs
< Rear panel balanced/unbalanced 1/4” TRS outputs with level control
< Rear panel coaxial S/PDIF I/O.
< Front panel headphone output with level control
< Versatile mixer/router control panel provides near zero-latency hardware direct monitoring.
< Extremely low-latency hardware/drivers.
< Kensington lock port for security
< Two 6-pin FireWire ports.
< Cool blue indicator LED.
< Bus-powered (six-pin FireWire connection required) or powered via included PSU.
< Frequency response from 20-40kHz
< Dynamic range of 102dB
< Supports sampling rates of 44.1k, 48k, 88.2k, and 96kHz
Mounting the device to a rack drawer
Holes are located on the left and right of the bottom of the FireWire Solo, to allow you to mount this device to a rack tray. The FireWire Solo is
mountable on either the left or right side of the drawer. If you choose to mount the device to a rack tray, you must first remove the rubber pads
from the base of the unit.
Minimum System Requirements
Windows
< Pentium III – 500 MHz or higher
< 128 MB RAM
< Windows XP (SP2) with DirectX 9.0b or higher
< Onboard FireWire connection or installed FireWire PCI card
The FireWire Solo is not supported under Windows 98, Windows ME or Windows 2000.
Mac OS
< Macintosh G3/G4* 500 MHz or higher
< OS X 10.2.8 or later, 256 MB RAM or
< OX X 10.3.5 or later, 512 MB RAM
< Onboard FireWire connection or installed FireWire PCI card
*G3/G4 accelerator cards not supported
OS X 10.3.5 or later required for Dolby Digital and DTS pass-through with Apple DVD player.

Especificaciones del producto

Marca: M-Audio
Categoría: No categorizado
Modelo: FireWire Solo

¿Necesitas ayuda?

Si necesitas ayuda con M-Audio FireWire Solo haz una pregunta a continuación y otros usuarios te responderán




No categorizado M-Audio Manuales

No categorizado Manuales

Últimos No categorizado Manuales