M-Audio Transit Pro Manual de Usario

M-Audio No categorizado Transit Pro

Lee a continuación 📖 el manual en español para M-Audio Transit Pro (2 páginas) en la categoría No categorizado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/2

Safety & Compliance Notices: Notice Concerning FCC Regulations: You are cautioned that

changes or modifications not expressly approved by the part responsible for compliance could void the

user’s authority to operate the equipment. This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation. This equipment

generates uses and can radiate radio frequency energy and, if not installed and used in accordance with

the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures: (a)

Reorient or relocate the receiving antenna; (b) move this unit; (c) increase the separation between the

equipment and receiver; (d) connect the equipment into an outlet on a circuit different from that to which

the receiver is connected; (e) be sure that all cables are properly shielded, using a choke or ferrite where

riate

;

(

)

consult the dealer or an ex

erienced radio/television technician for hel

User Guide (English)

For more information about this product (system requirements, compatibility

information, etc.), product registration, or product support, visit m-audio.com.

For safety and warranty information, visit m-audio.com/warranty.

Package Contents: Transit Pro, USB cable, 1/8”-to-stereo-RCA cable,

1/8”-to-TOSLINK® digital cable, User Guide

Windows users: Visit m-audio.com/drivers to download the necessary

Windows drivers for Transit Pro.

1. Power Input: Use a power adapter (5 VDC, 500 mA, center-

positive, sold separately) to connect this input to a power outlet.

2. USB Port: Insert this connector to a USB port on your

computer (powered on).

3. Main Output: Use an 1/8” (3.5mm) stereo cable to connect this

output to the analog input of an active speaker. Alternatively,

connect it to the digital input of a receiver.

4. Headphone Output: Connect standard 1/4” (6.35mm) or 1/8”

(3.5mm) stereo headphones to either of these outputs.

5. Volume: Turn this knob to set the volume of the main output

and headphone output.

6. Power Indicator: This light illuminates when Transit Pro is

powered on.

7. Analog Output Indicator: This light illuminates when Transit

Pro is successfully sending an analog signal out of its left/right

analog outputs.

8. DSD Indicators: One of these lights illuminates to indicate its

current Direct Stream Digital rate: DSD64 or DSD128.

9. Sampling Rate Indicators: One of these lights illuminates to

indicate which sampling rate Transit Pro is currently using: 44.1,

48, 88.2, 96, 176.4, 192, 352.8, or 384 kHz.

Guía del usuario (Español)

Para más información acerca de este producto (requisitos de sistema,

información de compatibilidad, etc.), registro o soporte del producto,

visite m-audio.com. Para información sobre la seguridad y la garantía,

visite m-audio.com/warranty.

Contenido del paquete: Transit Pro, cable USB, cable de 3,5 mm (1/8 pulg.) a

RCA estéreo, cable digital de 3,5 mm (1/8 pulg.) a TOSLINK

®, guía del usuario

Usuarios de Windows: Visitar m-audio.com/drivers para descargar los

drivers de Windows necesarios para Transit Pro.

1. Entrada de corriente: Utilice un adaptador de corriente (5 V CC,

500 mA, centro positivo, que se vende por separado) para conectar

esta entrada a una toma de corriente.

2. Puerto USB: Inserte este conector en un puerto USB de su

ordenador (encendido).

3. Salida principal: Utilice un cable estéreo de 3,5 mm (1/8 pulg.) para

conectar esta salida a la entrada analógica de un altavoz activo.

Como alternativa, conéctela a la entrada digital de un receptor.

4. Salida para auriculares: Conecte auriculares estéreo estándar de 6,35

mm (1/4 pulg.) o de 3,5 mm (1/8 pulg.) a cualquiera de estas salidas.

5. Volumen: Gire esta perilla para ajustar el volumen de la salida

principal y la salida para auriculares

6. Indicador de encendido: Esta luz se ilumina cuando el Transit Pro

está encendido.

7. Indicador de salida analógica: Esta luz se enciende cuando el

Transit Pro envía exitosamente una señal de salida analógica a sus

salidas analógicas izquierda/derecha.

8. Indicadores DSD: Una de estas luces se ilumina para indicar su

tasa actual de Direct Stream Digital: DSD64 o DSD128.

9. Indicadores de frecuencia de muestreo: Una de estas luces se

enciende para indicar qué frecuencia de muestreo está utilizando el

Transit Pro en ese momento: 44,1, 48, 88,2, 96, 176,4, 192, 352,8 o

384 kHz.

Technical Specifications

Connections: (1) 1/8” (3.5mm) analog/digital

(1) 1/8” (3.5mm) stereo headphone

(1) 1/4” (6.35mm) stereo headphone

(1) USB port

Sampling Rates: 44.1, 48, 88.2, 96, 176.4, 192, 352.8, 384 kHz

Direct Stream Digital Rates: DSD64, DSD128

Power: USB or power adapter (5 VDC, 500 mA, center-positive, sold separately)

Dimensions (WxDxH): 2.6” x 3.7” x 1.2” / 67 x 94 x 30 mm

Weight: 0.39 lbs. / 0.18 kg

Specifications are subject to change without notice. Manual Version 1.1

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must

accept any interference received, including interference that may cause undesired operation.

FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits

set forth for an uncontrolled environment. End users must follow the specific operating instructions for

satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction

with any other antenna or transmitter. For best audio quality, avoid using this device in a high RF-

radiated environment. RSS Statement for Canadian models: This device complies with Industry

Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this

device may not cause interference, and (2) this device must accept any interference, including

interference that may cause undesired operation of the device This unit does not exceed the Class B

limits for radio noise emission from digital apparatus set out in the radio interference regulations of the

Canadian Department of Communications.

ESD/EFT Warning: This unit may contain a microcomputer for signal processing and

control functions. In very rare situations, severe interference, noise from an external source,

or static electricity may cause it to lock up. In the unlikely event that this should happen,

turn off the unit, wait at least five seconds, and then turn it back on again. In an

environment with radio frequency interference, the unit may malfunction and resume

normal o

eration after removal of the interference.

Trademarks and Licenses: M-Audio is a trademark of inMusic Brands, Inc., registered in the U.S.

and other countries. Direct Stream Digital (DSD) and Sony are trademarks or registered trademarks of

Sony Corporation or any of its affiliates. TOSLINK

® is a registered trademark of Toshiba Corporation. All

other product or company names are trademarks or registered trademarks of their respective owners.

User Guide

Guía del usuario

Guide d’utilisation

Guida per l’uso

Benutzerhandbuch

English

Español

Français

Italiano

Deutsch

1 23

4 4 5 5

9 9

1 23

4 4 5 5

9 9

Guide d’utilisation (Français)

Pour plus d’informations sur la configuration système requise, la

compatibilité, etc., l’enregistrement du produit ou de l’assistance technique

concernant ce produit, veuillez visiter .m-audio.com Pour consulter les

consignes de sécurité et informations concernant la garantie, veuillez visiter

le site m-audio.com/warranty.

Contenu de l’emballage : Transit Pro, câble USB, câble adaptateur 3,5 mm

vers RCA stéréo, câble adaptateur 3,5 mm vers TOSLINK

®, guide d’utilisation

Utilisateurs Windows : Veuillez visiter le site m-audio.com/drivers pour

télécharger les pilotes Windows nécessaires pour utiliser le Transit Pro.

1. Entrée d’alimentation : Branchez un câble d’alimentation secteur

(5 V CC, 500 A, centre positif, vendu séparément) à cette entrée,

puis branchez l’autre l’extrémité à une prise secteur.

2. Port USB : Reliez ce connecteur au port USB de votre ordinateur

alors qu’il est sous tension.

3. Sortie principale : Utilisez un câble 3,5 mm stéréo pour relier cette

sortie à l’entrée analogique d’une enceinte active. Vous pourriez

également le brancher à l’entrée numérique d’un récepteur.

4. Sorties casque : Ces sorties permettent de brancher un casque

stéréo 6,35 mm ou 3,5 mm.

5. Volume : Ce bouton permet de régler le volume de la sortie

principale et de la sortie casque.

6. Indicateur d’alimentation : Ce témoin s’allume lorsque le Transit

Pro est sous tension.

7. Indicateur de sortie analogique : Ce témoin s’allume lorsque le

Transit Pro transmet un signal analogique sur ses sorties analogiques

gauche/droite.

8. Indicateurs DSD : Un de ces indicateurs s’allume pour indiquer le

taux Direct Stream Digital : DSD64 ou DSD128.

9. Indicateurs de fréquence d’échantillonnage : Un de ces indicateurs

s’allume pour indiquer la fréquence d’échantillonnage actuellement

utilisée par le Transit Pro : 44,1, 48, 88,2, 96, 176,4, 192, 352,8 o

384

kHz.

Guida per l’uso (Italiano)

Per maggiori informazioni in merito a questo prodotto (requisiti di sistema,

informazioni sulla compatibilità, ecc.), per la registrazione del prodotto e per

assistenza recarsi alla pagina m-audio.com. Per informazioni sulla sicurezza e

in merito alla garanzia, recarsi alla pagina m-audio.com/warranty.

Contenuti della confezione: Transit Pro, cavo USB, cavo RCA da 3,5 mm

(1/8”) a stereo, cavo digitale da 3,5 mm (1/8”) a TOSLINK

®, guida per l’uso

Utenti Windows: recarsi alla pagina m-audio.com/drivers per scaricare i

necessari driver Windows per Transit Pro.

1. Ingresso di alimentazione: servirsi di un adattatore di alimentazione

(5 VCC, 500 mA, polo centrale positivo, venduto separatamente) per

collegare questo ingresso a una presa elettrica.

2. Porta USB: Inserire questo connettore in una porta USB del

computer (acceso).

3. Uscita Main: servirsi di un cavo stereo da 3,5 mm (1/8”) per collegare

questa uscita all’ingresso analogico di un altoparlante attivo.

Alternativamente, collegarla all’ingresso digitale di un ricevitore.

4. Uscita cuffie: collegare cuffie stereo standard da 6,35 mm (1/4”) o

da 3,5 mm (1/8”) a una di queste uscite.

5. Volume: girare questa manopola per regolare il volume dell’uscita

principale (main) e dell’uscita cuffie.

6. Indicatore di alimentazione: si illumina quando il Transit Pro viene

acceso.

7. Indicatore di uscita analogica: questa spia si illumina quando il

Transit Pro invia un segnale analogico di uscita dalle sue uscite

analogiche sinistra/destra.

8. Indicatori DSD: uno di questi si illumina per indicare la sua

frequenza corrente di streaming digitale diretto. DSD64 o DSD128.

9. Indicatori di frequenza di campionamento: una di queste spie si

illumina per indicare quale frequenza di campionamento sta attualmente

utilizzando il Transit Pro: 44,1, 48, 88,2, 96, 176,4, 192, 352,8 o 384 kHz.

Benutzerhandbuch (Deutsch)

Für aktuelle Informationen zu diesem Produkt (Systemanforderungen,

Informationen zur Kompatibilität etc.), zur Produktregistrierung und den Support

besuchen Sie bitte m-audio.com. Die Sicherheits- und Garantieinformationen

finden Sie unter m-audio.com/warranty.

Lieferumfang: Transit Pro, USB-Kabel, 3,5mm-auf-Stereo-Cinch-Kabel,

3,5mm-auf-TOSLINK® Digitalkabel, Benutzerhandbuch

Windows-Benutzer: Besuchen Sie m-audio.com/drivers, um die notwendigen

Windows-Treiber für Transit Pro herunterzuladen.

1. Stromversorgung: Verwenden Sie ein Netzteil (5 VDC, 500 mA,

mittlerer Pin mit positiver Polarität), um diesen Eingang mit Ihrer

Stromquelle zu verbinden.

2. USB-Anschluss: Verbinden Sie diesen Stecker mit einem USB-Port

Ihres (eingeschalteten) Computers.

3. Hauptausgang: Verwenden Sie ein 3,5 mm Stereokabel, um diesen

Ausgang mit dem Analogeingang eines Aktivlautsprechers zu

verbinden. Alternativ schließen Sie es an den digitalen Eingang eines

Empfängers an.

4. Kopfhörerausgang: Verbinden Sie einen handelsüblichen 6,35 mm

oder 3,5 mm Stereokopfhörer mit einem oder beiden Analogausgängen.

5. Lautstärke: Drehen Sie diesen Regler, um die Lautstärke des

Hauptausgangs und des Kopfhörerausgangs anzupassen.

6. Netzanzeige: Dieses Licht leuchtet auf, wenn Transit Pro

eingeschaltet ist.

7. Analoge Ausgangsanzeige: Dieses Licht leuchtet auf, wenn Transit Pro

ein analoges Signal erfolgreich an die linken/rechten Analogausgänge

sendet.

8. DSD-Anzeige: Eines dieser Lichter beginnt zu leuchten, um die

aktuelle Direct Stream Digital-Rate anzuzeigen: DSD64 oder DSD128.

9. Abtastraten-Anzeigen: Eines dieser Lichter beginnt zu leuchten, um

anzuzeigen, welche Abtastrate Transit Pro derzeit verwendet: 44.1,

48, 88.2, 96, 176.4, 192, 352.8 oder 384 kHz.

1 23

4 4 5 5

9 9

1 23

4 4 5 5

9 9

1 23

4 4 5 5

9 9

Especificaciones del producto

Marca:	M-Audio
Categoría:	No categorizado
Modelo:	Transit Pro
Color del producto:	Zwart, zilver
Peso.:	4600 g
Ancho:	550 mm
Profundidad:	230 mm
Altura:	660 mm
Peso del embalaje:	4900 g
Ancho del embalaje:	580 mm
Empaquetadura en profundidad:	130 mm
Altura del embalaje:	807 mm
Activos:	1500 W
Interruptor encendido / apagado:	Ja
Adecuado para:	Binnen
Termostato ajustable:	Ja
Certificación:	CE
Protección contra sobrecalentamiento:	Ja
Portátil:	Ja
Ruedas:	Ja
Adecuado para volúmenes de habitación de hasta:	50 m³
Capacidad de calentamiento:	1500 W
Opciones de colocación:	Floor, Wall
Tipo de elemento calefactor:	Keramisch
Potencia de calefacción (mín.):	- W