Makita ADP05 Manual de Usario

Lee a continuación 📖 el manual en español para Makita ADP05 (1 páginas) en la categoría No categorizado. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/1
ENGLISH (Original instructions)
SYMBOLS
.........Read instructions.
.......Only for EU countries
Do not dispose of electric
equipment or battery pack
together with household waste
material!
In observance of the
European Directives, on
Waste Electric and Electronic
Equipment and Batteries and
Accumulators and Waste
Batteries and Accumulators
1
3
and their implementation in
accordance with national
laws, electric equipment and
batteries and battery pack(s)
that have reached the end
of their life must be collected
separately and returned to an
environmentally compatible
recycling facility.
SAFETY INSTRUCTIONS
Important safety instructions for
battery cartridge
Recharge only with the charger
speciedbythemanufacturer.A
charger that is suitable for one type of
batterypackmaycreateariskofre
when used with another battery pack.
• Usetheproductonlywithspecically
designated battery packs. Use of any
other battery packs may create a risk
ofinjuryandre.
Before using battery cartridge, read all
instructions and cautionary markings
on (a) battery charger, (b) battery, and
(c) product using battery.
Do not disassemble battery cartridge.
If operating time has become
excessively shorter, stop operating
immediately. It may result in a risk of
overheating, possible burns and even
an explosion.
Under abusive conditions, liquid may
be ejected from the battery; avoid
contact. If electrolyte gets into your
eyes, rinse them out with clear water
and seek medical attention right away.
It may result in loss of your eyesight.
Do not short the battery cartridge:
1. Do not touch the terminals with any
conductive material.
When not using or after charging,
remove the USB cable and close the
cover.
battery holder, causing injury to you or
someone around you.
Do not install the battery cartridge
forcibly. If the cartridge does not slide in
easily, it is not being inserted correctly.
To remove the battery cartridge, slide it
from the product while sliding the button
(3) on the front of the cartridge.
CONNECTING USB DEVICE
(Fig. 2)
CAUTION:
Connect only devices which are
compatible with DC5V, 2.1A power
source to the USB power supply port.
Otherwise it may cause malfunction to
the product.
Connect the USB cable (not included)
with the power supply port (4) of the
product. And then connect the other end
of the cable with the device.
You can also hang the product on your
belt.
NOTE:
Before connecting USB device to the
product, always backup your data of
USB device. Otherwise your data may
lose by any possibility.
The product may not supply power to
some USB devices.
Do not insert a nail, wire, etc. into USB
power supply port. Otherwise a circuit
shortmaycausesmokeandre.
Wait for 10 seconds before charging
another device consecutively.
On rare occasions, the tool may not
start charging due to the protection
system to reduce battery consumption.
In that case, remove the USB cable,
and reconnect it after approximately
10 seconds.
2. Avoid storing battery cartridge in a
container with other metal objects
such as nails, coins, etc.
3. Do not expose battery cartridge to
water or rain.
A battery short can cause a large
currentow,overheating,possible
burns and even a breakdown.
Do not store the product and battery
cartridge in locations where the
temperature may reach or exceed
50°C (122°F).
Do not incinerate the battery cartridge
even if it is severely damaged or is
completely worn out. The battery
cartridgecanexplodeinare.
Be careful not to drop or strike battery.
Do not use a damaged battery.
Follow your local regulations relating
to disposal of battery.
Tips for maintaining maximum
battery life
Never recharge a fully charged battery
cartridge. Overcharging shortens the
battery service life.
Charge the battery cartridge with room
temperature at 10°C - 40°C (50°F -
104°F).
Let a hot battery cartridge cool down
before charging it.
Charge the battery cartridge if you do
not use it for a long period (more than
six months).
For an optimum life-time, the battery
cartridge has to be fully charged, after
use.
SAVE THESE INSTRUCTIONS.
2
4
SPECIFICATIONS
Model ADP05
USB
power
supply
Ports 2 (USB A type)
Output
voltage DC 5V
Output
current
2.1A (each ports)
(4.2A in total)
Input
rating
14.4 - 18V DC,
5A max.
Max. operating
temperature 40 degree C
Battery cartridge
BL1415, BL1415N,
BL1430, BL1440,
BL1450, BL1815,
BL1815N, BL1820,
BL1820B, BL1830,
BL1840, BL1840B,
BL1850, BL1850B
Weight (without
battery) 0.11 kg (0.2 lbs)
Due to our continuing program of
research and development, the
specicationshereinaresubjectto
change without notice.
• Specicationsmaydifferfromcountry
to country.
INSTALLING OR REMOVING
BATTERY CARTRIDGE (Fig. 1)
To install the battery cartridge (1), align
the tongue on the battery cartridge with
the groove in the product and slip it into
place. Insert it all the way until it locks in
place with a little click. If you can see the
red indicator (2) on the upper side of the
button, it is not locked completely.
Always install the battery cartridge fully
until the red indicator cannot be seen.
If not, it may accidentally fall out of the
1
2
3
4
ADP05
1
2
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, Japan
www.makita.com
ALA
ADP05-NA3-0415

Especificaciones del producto

Marca: Makita
Categoría: No categorizado
Modelo: ADP05

¿Necesitas ayuda?

Si necesitas ayuda con Makita ADP05 haz una pregunta a continuación y otros usuarios te responderán




No categorizado Makita Manuales

No categorizado Manuales

Últimos No categorizado Manuales