Makita BTW104Z Manual de Usario

Makita maquina de atornillar BTW104Z

Lee a continuación 📖 el manual en español para Makita BTW104Z (12 páginas) en la categoría maquina de atornillar. Esta guía fue útil para 2 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
IMPORTANT: Read Before Using.
Cordless Impact Wrench
BTW074
BTW104
013680
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model BTW074 BTW104
Standard bolt M5 - M12 M5 - M12
Capacities High tensile bolt M5 - M10 M5 - M10
Square drive 9.5 mm 9.5 mm
No load speed (min-1) 0 - 2,500 0 - 2,700
Impacts per minute 0 - 3,500 0 - 3,500
Max. fastening torque 65 N.m 95 N.m
Overall length 144 mm 144 mm
Standard battery cartridge(s)
Warning: Use only the battery cartridge(s) described.
BL1430A /
BL1415NA
BL1430A /
BL1415NA
Net weight 1.3 kg / 1.1 kg 1.3 kg / 1.1 kg
Rated voltage D.C. 14.4 V D.C. 14.4 V
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
END004-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ Only for EU countries
Do not dispose of electric equipment or
battery pack together with household
waste material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment, 2006/66/EC on
batteries and accumulators and waste
batteries and accumulators and their
implementation in accordance with
national laws, electric equipment and
battery pack that have reached the end
of their life must be collected separately
and returned to an environmentally
compatible recycling facility.
ENE036-1
Intended use
The tool is intended for fastening bolts and nuts.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Model BTW074
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (L
WA) : 102 dB(A)
Uncertainty (K) : 3 dB(A)
Model BTW104
Sound pressure level (L
pA) : 92 dB(A)
Sound power level (L
WA) : 103 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model BTW074
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (ah) : 8.0 m/s2
Uncertainty (K) : 1.5 m/s2
Model BTW104
Work mode : impact tightening of fasteners of the
maximum capacity of the tool
Vibration emission (ah) : 8.5 m/s2
Uncertainty (K) : 1.5 m/s2
Cd
Ni-MH
Li-ion
3
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-16
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Cordless Impact Wrench
Model No./ Type: BTW074, BTW104
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
3.9.2012
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
GEA006-2
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a ground fault circuit
interrupter (GFCI) protected supply. Use of an
GFCI reduces the risk of electric shock.

Especificaciones del producto

Marca: Makita
Categoría: maquina de atornillar
Modelo: BTW104Z

¿Necesitas ayuda?

Si necesitas ayuda con Makita BTW104Z haz una pregunta a continuación y otros usuarios te responderán


maquina de atornillar Makita Manuales

Makita

Makita DHP448 Manual de Usario

12 Octubre 2024
Makita

Makita 6906J Manual de Usario

5 Octubre 2024
Makita

Makita DTW300Z Manual de Usario

4 Octubre 2024
Makita

Makita DA3000V Manual de Usario

4 Octubre 2024
Makita

Makita DTW180RTJ Manual de Usario

2 Octubre 2024
Makita

Makita DTWA190Z Manual de Usario

2 Octubre 2024
Makita

Makita 6952 Manual de Usario

1 Octubre 2024
Makita

Makita TD090D Manual de Usario

27 Septiembre 2024
Makita

Makita BDF445RHE Manual de Usario

24 Septiembre 2024
Makita

Makita TW001GD202 Manual de Usario

24 Septiembre 2024

maquina de atornillar Manuales

Últimos maquina de atornillar Manuales

Bosch

Bosch GSB 12-2 Professional Manual de Usario

24 Octubre 2024
MSW

MSW -ACW700 Manual de Usario

20 Octubre 2024
Einhell

Einhell CC-IW 450 Manual de Usario

17 Octubre 2024
Metabo

Metabo SSW 650 Manual de Usario

17 Octubre 2024
Metabo

Metabo SSW 18 LT Manual de Usario

15 Octubre 2024
Black And Decker

Black And Decker HP9012 Manual de Usario

10 Octubre 2024
Milwaukee

Milwaukee 2769-20 Manual de Usario

7 Octubre 2024
Bosch

Bosch GSB 18V-65 Professional Manual de Usario

5 Octubre 2024
DeWalt

DeWalt DW132 Manual de Usario

5 Octubre 2024
Bosch

Bosch GDX 18V-285 Professional Manual de Usario

4 Octubre 2024