Makita DA312D Manual de Usario
Lee a continuación 📖 el manual en español para Makita DA312D (76 páginas) en la categoría Taladros. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/76
GB
Cordless Angle Drill Instruction Manual
F
Perceuse d’angle sans fil Manuel d’instructions
D
Akku-Winkelbohrmaschine Betriebsanleitung
I
Trapano ad angolo a betteria Istruzioni per l’uso
NL
Haakse boormachine snoerloze Gebruiksaanwijzing
E
Taladro en ángulo sin cable Manual de instrucciones
P
Berbequim angular a bateria Manual de instruções
DK
Batteridrevet vinkelboremaskine Brugsanvisning
S
Sladdlös vinkelborrmaskin Bruksanvisning
N
Batteridrevet vinkelboremaskin Bruksanvisning
SF
Langaton kulmaporakone Käyttöohje
GR Φορητ γωνιακ τρυπάνι Οδηγίες χρήσεως
7.2 V DA 302D
9.6 V DA392D
12V DA312D
2
1 2
3 4
5 6
7 8
1
2
2
3
6
7
2
4
5
9
8
10 11
12
13
1
3
ENGLISH
Explanation of general view
1 Set plate
2 Battery cartridge
3 Button
4 Charging light
5 Battery charger
6 Sleeve
7 Ring
8 Reversing switch lever
9 Switch trigger
10 B side
11 A side
12 Restart button
13 Screw
SPECIFICATIONS
Model DA302D DA392D DA312D
Capacities
Steel ........................................................... 10 mm 10 mm 10 mm
Wood .......................................................... 10 mm 12 mm 12 mm
Wood screw ................................................ 4.5 mm x 20 mm 4.5 mm x 20 mm 4.5 mm x 20 mm
No load speed (min-1 ) .................................... 0 – 800 0 – 800 0 – 800
Overall length ................................................ 296 mm 324 mm 324 mm
Net weight ...................................................... 1.1 kg 1.3 kg 1.4 kg
Rated voltage ................................................ D.C. 7.2 V D.C.9.6 V D.C.12 V
• Due to our continuing program of research and devel-
opment, the specifications herein are subject to change
without notice.
• Note: Specifications may differ from country to country.
Safety hints
For your own safety, please refer to the enclosed safety
instructions.
IMPORTANT SAFETY INSTRUCTIONS FOR
CHARGER & BATTERY CARTRIDGE
ENC001-3
1. SAVE THESE INSTRUCTIONS — This manual
contains important safety and operating instruc-
tions for battery charger.
2. Before using battery charger, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using bat-
tery.
3. CAUTION — To reduce risk of injury, charge only
MAKITA type rechargeable batteries. Other types
of batteries may burst causing personal injury
and damage.
4. Do not expose charger to rain or snow.
5. Use of an attachment not recommended or sold
by the battery charger manufacturer may result
in a risk of fire, electric shock, or injury to per-
sons.
6. To reduce risk of damage to electric plug and
cord, pull by plug rather than cord when discon-
necting charger.
7. Make sure cord is located so that it will not be
stepped on, tripped over, or otherwise subjected
to damage or stress.
8. Do not operate charger with damaged cord or
plug — replace them immediately.
9. Do not operate charger if it has received a sharp
blow, been dropped, or otherwise damaged in
any way; take it to a qualified serviceman.
10. Do not disassemble charger or battery cartridge;
take it to a qualified serviceman when service or
repair is required. Incorrect reassembly may
result in a risk of electric shock or fire.
11. To reduce risk of electric shock, unplug charger
from outlet before attempting any maintenance
or cleaning. Turning off controls will not reduce
this risk.
12. The battery charger is not intended for use by
young children or infirm persons without super-
vision.
13. Young children should be supervised to ensure
that they do not play with the battery charger.
14. If operating time has become excessively
shorter, stop operating immediately. It may
result in a risk of overheating, possible burns
and even an explosion.
15. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
ADDITIONAL SAFETY RULES FOR CHARGER
& BATTERY CARTRIDGE
1. Do not charge Battery Cartridge when tempera-
ture is BELOW 10°C (50°F) or ABOVE 40°C
(104°F).
2. Do not attempt to use a step-up transformer, an
engine generator or DC power receptacle.
3. Do not allow anything to cover or clog the
charger vents.
4. Always cover the battery terminals with the bat-
tery cover when the battery cartridge is not
used.
5. Do not short the battery cartridge:
(1) Do not touch the terminals with any conduc-
tive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
(3) Do not expose battery cartridge to water or
rain.
A battery short can cause a large current flow,
overheating, possible burns and even a break-
down.
6. Do not store the tool and battery cartridge in
locations where the temperature may reach or
exceed 50°C (122°F).
Especificaciones del producto
| Marca: | Makita |
| Categoría: | Taladros |
| Modelo: | DA312D |
¿Necesitas ayuda?
Si necesitas ayuda con Makita DA312D haz una pregunta a continuación y otros usuarios te responderán
Taladros Makita Manuales
19 Octubre 2024
18 Octubre 2024
16 Octubre 2024
15 Octubre 2024
15 Octubre 2024
14 Octubre 2024
13 Octubre 2024
13 Octubre 2024
13 Octubre 2024
12 Octubre 2024
Taladros Manuales
- Taladros Bosch
- Taladros AEG
- Taladros Ozito
- Taladros Gude
- Taladros Hitachi
- Taladros Black And Decker
- Taladros Ryobi
- Taladros Worx
- Taladros Meec Tools
- Taladros Hikoki
- Taladros Luxor
- Taladros Maktec
- Taladros Bort
- Taladros Elu
Últimos Taladros Manuales
21 Octubre 2024
20 Octubre 2024
18 Octubre 2024
18 Octubre 2024
18 Octubre 2024
18 Octubre 2024
17 Octubre 2024
12 Octubre 2024
11 Octubre 2024
11 Octubre 2024