Makita DGA900PT2 Manual de Usario

Makita Máquina de molienda DGA900PT2

Lee a continuación 📖 el manual en español para Makita DGA900PT2 (16 páginas) en la categoría Máquina de molienda. Esta guía fue útil para 9 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/16

INSTRUCTION MANUAL

Cordless Angle Grinder

DGA700

DGA900

ENGLISH: Original instructions

Read before use.

2 ENGLISH

SPECIFICATIONS

Model: DGA700 DGA900

Wheel diameter 180mm 230mm

Max. wheel thickness 7.2mm 6.5mm

Spindle thread M14 or M16 or 5/8″ (country specic)

Rated speed (n) 7,800min-1 6,000min-1

Overall length 499mm

Rated voltage D.C.36 V

Battery cartridge BL1815N, BL1820, BL1820B, BL1830, BL1830B, BL1840,

BL1840B, BL1850, BL1850B, BL1860B

Net weight 5.0 - 6.0 kg 5.2 - 8.0 kg

• Due to our continuing program of research and development, the specications herein are subject to change

without notice.

• Specications and battery cartridge may differ from country to country.

• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-

est combination, according to EPTA-Procedure 01/2014, are shown in the table.

Symbols

The following show the symbols used for the equip-

ment. Be sure that you understand their meaning before

use.

Read instruction manual.

Wear safety glasses.

Ni-MH

Li-ion

Only for EU countries

Do not dispose of electric equipment or battery

pack together with household waste material!

In observance of the European Directives,

on Waste Electric and Electronic Equipment

and Batteries and Accumulators and Waste

Batteries and Accumulators and their imple-

mentation in accordance with national laws,

electric equipment and batteries and battery

pack(s) that have reached the end of their life

must be collected separately and returned to an

environmentally compatible recycling facility.

Intended use

The tool is intended for grinding, sanding and cutting of

metal and stone materials without the use of water.

Noise

The typical A-weighted noise level determined accord-

ing to EN60745:

Model DGA700

Sound pressure level (LpA) : 88 dB(A)

Sound power level (LWA) : 99 dB (A)

Uncertainty (K) : 3 dB(A)

Model DGA900

Sound pressure level (LpA) : 88 dB(A)

Sound power level (LWA) : 99 dB (A)

Uncertainty (K) : 3 dB(A)

WARNING: Wear ear protection.

Vibration

The vibration total value (tri-axial vector sum) deter-

mined according to EN60745:

Model DGA700

Work mode: surface grinding with normal side grip

Vibration emission (a

h, AG ) : 7.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: surface grinding with anti vibration side grip

Vibration emission (a

h, AG ) : 7.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: disc sanding with normal side grip

Vibration emission (a

h, DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Work mode: disc sanding with anti vibration side grip

Vibration emission (a

h, DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Model DGA900

Work mode: surface grinding with normal side grip

Vibration emission (a

h, AG ) : 7.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: surface grinding with anti vibration side grip

Vibration emission (a

h, AG ) : 7.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: disc sanding with normal side grip

Vibration emission (a

h, DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Work mode: disc sanding with anti vibration side grip

Vibration emission (a

h, DS) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

NOTE: The declared vibration emission value has

been measured in accordance with the standard test

method and may be used for comparing one tool with

another.

NOTE: The declared vibration emission value

may also be used in a preliminary assessment of

exposure.

3 ENGLISH

WARNING: The vibration emission during actual

use of the power tool can differ from the declared

emission value depending on the ways in which the

tool is used.

WARNING: Be sure to identify safety measures

to protect the operator that are based on an estima-

tion of exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it is

running idle in addition to the trigger time).

WARNING: The declared vibration emission

value is used for main applications of the power tool.

However if the power tool is used for other applica-

tions, the vibration emission value may be different.

EC Declaration of Conformity

For European countries only

The EC declaration of conformity is included as Annex A

to this instruction manual.

SAFETY WARNINGS

General power tool safety warnings

WARNING: Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool. Failure to follow all instructions

listed below may result in electric shock, re and/or

serious injury.

Save all warnings and instruc-

tions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive atmo-

spheres, such as in the presence of ammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical Safety

1. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodied plugs and matching outlets will

reduce risk of electric shock.

2. Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of elec-

tric shock if your body is earthed or grounded.

3. Do not expose power tools to rain or wet con-

ditions. Water entering a power tool will increase

the risk of electric shock.

4. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords

increase the risk of electric shock.

5. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

6. If operating a power tool in a damp location

is unavoidable, use a residual current device

(RCD) protected supply. Use of an RCD reduces

the risk of electric shock.

7. Power tools can produce electromagnetic

elds (EMF) that are not harmful to the user.

However, users of pacemakers and other similar

medical devices should contact the maker of their

device and/or doctor for advice before operating

this power tool.

Personal Safety

1. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the inuence of drugs, alcohol or med-

ication. A moment of inattention while operating

power tools may result in serious personal injury.

2. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as a dust mask, non-skid safety shoes, hard hat or

hearing protection used for appropriate conditions

will reduce personal injuries.

3. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools with

your nger on the switch or energising power tools

that have the switch on invites accidents.

4. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

5. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

6. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away

from moving parts. Loose clothes, jewellery or

long hair can be caught in moving parts.

7. If devices are provided for the connection of

dust extraction and collection facilities, ensure

these are connected and properly used. Use of

dust collection can reduce dust-related hazards.

8. Do not let familiarity gained from frequent use

of tools allow you to become complacent and

ignore tool safety principles. A careless action

can cause severe injury within a fraction of a

second.

9. Always wear protective goggles to protect

your eyes from injury when using power tools.

The goggles must comply with ANSI Z87.1 in

the USA, EN 166 in Europe, or AS/NZS 1336

in Australia/New Zealand. In Australia/New

Zealand, it is legally required to wear a face

shield to protect your face, too.

Especificaciones del producto

Marca:	Makita
Categoría:	Máquina de molienda
Modelo:	DGA900PT2
Color del producto:	Geel
Peso.:	250 g
Ancho:	92 mm
Profundidad:	45 mm
Altura:	223 mm
Batería/Voltaje de la batería:	9 V
Número soportado de baterías/baterías:	1
Alarma(s) audible(s):	Ja
Temperatura de almacenamiento:	-29 - 66 °C
Temperatura de funcionamiento (TT):	-7 - 49 °C
Tipo de Batería:	6LR61
Materiales detectables:	Live cable, Metal