Makita DTD129Z Manual de Usario

Makita maquina de atornillar DTD129Z

Lee a continuación 📖 el manual en español para Makita DTD129Z (12 páginas) en la categoría maquina de atornillar. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

IMPORTANT: Read Before Using.

Cordless Impact Driver

DTD129

012780

ENGLISH (Original instructions)

SPECIFICATIONS

Model DTD129

Machine screw 4 mm - 8 mm

Standard bolt 5 mm - 14 mm Capacities

High tensile bolt 5 mm - 12 mm

No load speed (min-1) 0 - 2,500

Impacts per minute 0 - 3,200

Overall length 147 mm

Battery cartridge BL1815 / BL1815N / BL1820 BL1830 / BL1840 / BL1850

Net weight 1.3 kg 1.5 kg

Rated voltage D.C. 18 V

• Due to our continuing program of research and development, the specifications herein are subject to change without notice.

• Specifications and battery cartridge may differ from country to country.

• Weight, with battery cartridge, according to EPTA-Procedure 01/2003

END004-6

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ Only for EU countries

Do not dispose of electric equipment or

battery pack together with household

waste material!

In observance of the European

Directives, on Waste Electric and

Electronic Equipment and Batteries and

Accumulators and Waste Batteries and

Accumulators and their implementation

in accordance with national laws,

electric equipment and batteries and

battery pack(s) that have reached the

end of their life must be collected

separately and returned to an

environmentally compatible recycling

facility.

ENE033-1

Intended use

The tool is intended for screw driving in wood, metal and

plastic.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Sound pressure level (L

pA) : 94 dB (A)

Sound power level (L

WA) : 105 dB (A)

Uncertainty (K) : 3 dB (A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum)

determined according to EN60745:

Work mode : impact tightening of fasteners of the

maximum capacity of the tool

Vibration emission (ah) : 15.0 m/s2

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

Ni-MH

Li-ion

ENH101-16

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Cordless Impact Driver

Model No./ Type: DTD129

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

The technical documentation is kept by:

Makita International Europe Ltd.

Technical Department,

Michigan Drive, Tongwell,

Milton Keynes, Bucks MK15 8JD, England

24.11.2011

000230

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, 446-8502, JAPAN

GEA006-2

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

7. Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool.

Keep cord away from heat, oil, sharp edges or

moving parts. Damaged or entangled cords

increase the risk of electric shock.

8. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of

a cord suitable for outdoor use reduces the risk of

electric shock.

9. If operating a power tool in a damp location is

unavoidable, use a ground fault circuit

interrupter (GFCI) protected supply. Use of an

GFCI reduces the risk of electric shock.

Personal safety

10. Stay alert, watch what you are doing and use

common sense when operating a power tool.

Do not use a power tool while you are tired or

under the influence of drugs, alcohol or

medication. A moment of inattention while

operating power tools may result in serious

personal injury.

11. Use personal protective equipment. Always

wear eye protection. Protective equipment such

as dust mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate conditions

will reduce personal injuries.

12. Prevent unintentional starting. Ensure the

switch is in the off-position before connecting

to power source and/or battery pack, picking

up or carrying the tool. Carrying power tools

with your finger on the switch or energising power

tools that have the switch on invites accidents.

13. Remove any adjusting key or wrench before

turning the power tool on. A wrench or a key left

attached to a rotating part of the power tool may

result in personal injury.

14. Do not overreach. Keep proper footing and

balance at all times. This enables better control

of the power tool in unexpected situations.

Especificaciones del producto

Marca:	Makita
Categoría:	maquina de atornillar
Modelo:	DTD129Z
Peso.:	160 g
Ancho:	51 mm
Profundidad:	78 mm
Altura:	28 mm
Certificados de sostenibilidad:	RoHS
Cantidad por paquete:	60 stuk(s)
Voltaje de entrada:	12 V
Potencia de salida:	15 W
Corriente de salida:	0.625 A
Abarcando:	24 V