Makita GA4534 Manual de Usario

Makita Máquina de molienda GA4534

Lee a continuación 📖 el manual en español para Makita GA4534 (12 páginas) en la categoría Máquina de molienda. Esta guía fue útil para 15 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Angle Grinder
GA4034
GA4534
GA5034
010689
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model GA4034 GA4534 GA5034
Depressed center wheel diameter 100 mm 115 mm 125 mm
Max. wheel thickness 6.4 mm 6.4 mm 6.4 mm
Spindle thread M10 M14 or 5/8"
(country specific)
M14 or 5/8"
(country specific)
Rated speed (n)/No load speed (n
0) 11,000 min-1 11,000 min-1 11,000 min-1
Overall length 265 mm 265 mm 265 mm
Net weight 1.8 kg 1.9 kg 1.9 kg
Safety class /II
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END202-7
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Wear safety glasses.
･ Only for EU countries
Do not dispose of electric equipment
together with household waste
material!
In observance of European Directive
2012/19/EU on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible
recycling facility.
ENE048-1
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined
according to EN60745:
Sound pressure level (L
pA ) : 86 dB(A)
Sound power level (L
WA) : 97 dB(A)
Uncertainty (K) : 3 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum)
determined according to EN60745:
Model GA4034
Work mode : surface grinding
Vibration emission (ah,AG) : 7.5 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding
Vibration emission (ah,DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
Model GA4534
Work mode : surface grinding
Vibration emission (ah,AG) : 8.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode : disc sanding
Vibration emission (ah,DS) : 2.5 m/s2
Uncertainty (K) : 1.5 m/s2
Model GA5034
Work mode : surface grinding
Vibration emission (ah,AG) : 8.0 m/s2
Uncertainty (K) : 1.5 m/s2
Work mode: disc sanding
Vibration emission (ah,DS) : 2.5 m/s2 or less
Uncertainty (K) : 1.5 m/s2
3
ENG902-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
• The declared vibration emission value is used for
main applications of the power tool. However if the
power tool is used for other applications, the
vibration emission value may be different.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
ENH101-16
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine:
Angle Grinder
Model No./ Type: GA4034,GA4534,GA5034
are of series production and
Conforms to the following European Directives:
2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by:
Makita International Europe Ltd.
Technical Department,
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
26.6.2009
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use
of a cord suitable for outdoor use reduces the risk
of electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
10. Use of power supply via a RCD with a rated
residual current of 30mA or less is always
recommended.

Especificaciones del producto

Marca: Makita
Categoría: Máquina de molienda
Modelo: GA4534

¿Necesitas ayuda?

Si necesitas ayuda con Makita GA4534 haz una pregunta a continuación y otros usuarios te responderán


Máquina de molienda Makita Manuales

Makita

Makita GA9060R Manual de Usario

14 Octubre 2024
Makita

Makita DGA700Z Manual de Usario

13 Octubre 2024
Makita

Makita GA022GD202 Manual de Usario

2 Octubre 2024
Makita

Makita GA7063RX02 Manual de Usario

2 Octubre 2024
Makita

Makita GA013GD101 Manual de Usario

2 Octubre 2024
Makita

Makita 9563 Manual de Usario

30 Septiembre 2024
Makita

Makita DGA513Z Manual de Usario

28 Septiembre 2024
Makita

Makita GA7062 Manual de Usario

24 Septiembre 2024
Makita

Makita XAG01Z Manual de Usario

22 Septiembre 2024
Makita

Makita GA7060R Manual de Usario

22 Septiembre 2024

Máquina de molienda Manuales

Últimos Máquina de molienda Manuales

Tryton

Tryton TDS125B Manual de Usario

26 Octubre 2024
Chicago Pneumatic

Chicago Pneumatic CP7255 Manual de Usario

26 Octubre 2024
Bosch

Bosch GWS 18-150 PL Professional Manual de Usario

23 Octubre 2024
Parkside

Parkside PEXS 270 A1 Manual de Usario

17 Octubre 2024
Parkside

Parkside PWS 1010 Manual de Usario

17 Octubre 2024
Hikoki

Hikoki GP2S2 Manual de Usario

15 Octubre 2024
Hitachi

Hitachi G 13SR Manual de Usario

14 Octubre 2024
Milwaukee

Milwaukee 2781-21 Manual de Usario

8 Octubre 2024
Metabo

Metabo WP820-115 Manual de Usario

8 Octubre 2024
DeWalt

DeWalt DW887N Manual de Usario

6 Octubre 2024