Makita GA4550R Manual de Usario
Makita
Slijpmachine
GA4550R
Lee a continuación 📖 el manual en español para Makita GA4550R (16 páginas) en la categoría Slijpmachine. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios
Página 1/16
INSTRUCTION MANUAL
Angle Grinder
GA4050
GA4050R
GA4550
GA4550R
GA5050
GA5050R
ENGLISH: Original instructions
DOUBLE INSULATION
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: GA4050
GA4050R
GA4550
GA4550R
GA5050
GA5050R
Wheel diameter 100 mm (4″) 115 mm (4-1/2″) 125 mm (5″)
Max. wheel thickness 6.4 mm (1/4″) 7.2 mm (9/32″)
Spindle thread M10 M14 or 5/8″
Rated speed (n) 11,000 min-1
Overall length 325 mm
Net weight 2.3 - 2.6 kg
2.4 - 2.8 kg
2.5 - 2.8 kg
Safety class /II
•
Due to our continuing program of research and development, the specications herein are subject to change without notice.
• Specications may dier from country to country.
• The weight may dier depending on the attachment(s). The lightest and heaviest combination, according to
EPTA-Procedure 01/2014, are shown in the table.
Symbols
The followings show the symbols which may be used
for the equipment. Be sure that you understand their
meaning before use.
Read instruction manual.
Wear safety glasses.
DOUBLE INSULATION
Only for EU countries
Do not dispose of electric equipment
together with household waste material! In
observance of the European Directive, on
Waste Electric and Electronic Equipment
and its implementation in accordance with
national law, electric equipment that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
Intended use
The tool is intended for grinding, sanding and cutting of
metal and stone materials without the use of water.
Power supply
The tool should be connected only to a power supply of the same
voltage as indicated on the nameplate, and can only be operated
on single-phase AC supply. They are double-insulated and can,
therefore, also be used from sockets without earth wire.
Noise
The typical A-weighted noise level determined according to EN60745-2-3:
Model Sound pressure
level (LpA) : (dB(A))
Sound power level
(LWA) : (dB(A))
Uncertainty (K) :
(dB(A))
GA4050 91 102 3
GA4050R 91 102 3
GA4550 91 102 3
GA4550R 91 102 3
GA5050 91 102 3
GA5050R 91 102 3
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual use of the power tool can dier from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o and when it is running idle in addition to the trigger time).
3 ENGLISH
Vibration
The vibration total value (tri-axial vector sum) determined according to EN60745-2-3:
Work mode: surface grinding with normal side grip
Model
Vibration emission (ah,
AG) : (m/s2)
Uncertainty (K) : (m/s2)
GA4050 6.5 1.5
GA4050R 6.5 1.5
GA4550 7.0 1.5
GA4550R 7.0 1.5
GA5050 7.5 1.5
GA5050R 7.5 1.5
Work mode: surface grinding with anti vibration side grip
Model
Vibration emission (ah,
AG) : (m/s2)
Uncertainty (K) : (m/s2)
GA4050 5.5 1.5
GA4050R 5.5 1.5
GA4550 7.0 1.5
GA4550R 7.0 1.5
GA5050 8.5 1.5
GA5050R 8.5 1.5
Work mode: disc sanding with normal side grip
Model
Vibration emission (ah,
AG) : (m/s2)
Uncertainty (K) : (m/s2)
GA4050 2.5 m/s2 or less 1.5
GA4050R 2.5 m/s2 or less 1.5
GA4550 2.5 1.5
GA4550R 2.5 1.5
GA5050 2.5 m/s2 or less 1.5
GA5050R 2.5 m/s2 or less 1.5
Work mode: disc sanding with anti vibration side grip
Model
Vibration emission (ah,
AG) : (m/s2)
Uncertainty (K) : (m/s2)
GA4050 2.5 m/s2 or less 1.5
GA4050R 2.5 m/s2 or less 1.5
GA4550 2.5 m/s2 or less 1.5
GA4550R 2.5 m/s2 or less 1.5
GA5050 2.5 m/s2 or less 1.5
GA5050R 2.5 m/s2 or less 1.5
NOTE: The declared vibration total value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission during actual use of the power tool can dier from the declared
value(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o and when it is running idle in addition to the trigger time).
WARNING: The declared vibration emission value is used for main applications of the power tool. However if
the power tool is used for other applications, the vibration emission value may be dierent.
Especificaciones del producto
Marca: | Makita |
Categoría: | Slijpmachine |
Modelo: | GA4550R |
¿Necesitas ayuda?
Si necesitas ayuda con Makita GA4550R haz una pregunta a continuación y otros usuarios te responderán
Slijpmachine Makita Manuales
22 Agosto 2024
20 Agosto 2024
16 Agosto 2024
14 Agosto 2024
13 Agosto 2024
13 Agosto 2024
10 Agosto 2024
10 Agosto 2024
9 Agosto 2024
8 Agosto 2024
Slijpmachine Manuales
- Slijpmachine Bosch
- Slijpmachine AEG
- Slijpmachine DeWalt
- Slijpmachine Silverline
- Slijpmachine Ferm
- Slijpmachine Ozito
- Slijpmachine Gude
- Slijpmachine Gorenje
- Slijpmachine Hitachi
- Slijpmachine Black And Decker
- Slijpmachine Vonroc
- Slijpmachine Skil
- Slijpmachine ECG
- Slijpmachine Ryobi
- Slijpmachine Festool
- Slijpmachine Metabo
- Slijpmachine Parkside
- Slijpmachine Worx
- Slijpmachine Milwaukee
- Slijpmachine Hikoki
- Slijpmachine Dremel
- Slijpmachine ABB
- Slijpmachine Hazet
- Slijpmachine Einhell
- Slijpmachine Craftsman
- Slijpmachine Yamato
- Slijpmachine Powerplus
- Slijpmachine Genesis
- Slijpmachine Bunn
- Slijpmachine Trotec
- Slijpmachine Gamma
- Slijpmachine Kress
- Slijpmachine Dolmar
- Slijpmachine Pattfield
- Slijpmachine Max
- Slijpmachine Solo
- Slijpmachine Meister Craft
- Slijpmachine Toolcraft
- Slijpmachine RIDGID
- Slijpmachine Proxxon
- Slijpmachine Fein
- Slijpmachine Alpha Tools
- Slijpmachine Rodcraft
- Slijpmachine Classic Power
Últimos Slijpmachine Manuales
18 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
14 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
12 Septiembre 2024
10 Septiembre 2024