Makita HM1203C Manual de Usario

Makita taladradora HM1203C

Lee a continuación 📖 el manual en español para Makita HM1203C (12 páginas) en la categoría taladradora. Esta guía fue útil para 6 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/12
1
ENGLISH (Original instructions)
INSTRUCTION MANUAL
DOUBLE INSULATION
IMPORTANT: Read Before Using.
Demolition Hammer
HM1213C
HM1203C
009939
2
ENGLISH (Original instructions)
SPECIFICATIONS
Model HM1213C HM1203C
Blows per minute 950 - 1,900 min
-1
Overall length 576 mm
Net weight 10.8 kg 9.7 kg
Safety class II
• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.
• Note: Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
END201-5
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･ Read instruction manual.
･ DOUBLE INSULATION
･ Only for EU countries
Do not dispose of electric equipment
together with household waste material!
In observance of European Directive
2002/96/EC on waste electric and
electronic equipment and its
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an environmentally compatible recycling
facility.
ENE045-1
Intended use
The tool is intended for chiselling work in concrete, brick,
stone and asphalt as well as for driving and compacting
with appropriate accessories.
ENF002-2
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and can
only be operated on single-phase AC supply. They are
double-insulated and can, therefore, also be used from
sockets without earth wire.
ENG905-1
Noise
The typical A-weighted noise level determined according
to EN60745:
Model HM1213C
Sound pressure level (L
pA) : 75 dB(A)
Sound power level (L
WA) : 95 dB(A)
Uncertainty (K) : 2.53 dB(A)
Model HM1203C
Sound pressure level (L
pA) : 81 dB(A)
Sound power level (L
WA) : 95 dB(A)
Uncertainty (K) : 2.1 dB(A)
Wear ear protection
ENG900-1
Vibration
The vibration total value (tri-axial vector sum) determined
according to EN60745:
Model HM1213C
Work mode : chiseling function with side handle
Vibration emission (ah,CHeq) : 7.0 m/s2
Uncertainty (K) : 1.5 m/s2
Model HM1203C
Work mode : chiseling function with side handle
Vibration emission (ah,CHeq) : 15.5 m/s2
Uncertainty (K) : 1.5 m/s2
ENG901-1
• The declared vibration emission value has been
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
• The declared vibration emission value may also be
used in a preliminary assessment of exposure.
WARNING:
• The vibration emission during actual use of the
power tool can differ from the declared emission
value depending on the ways in which the tool is
used.
• Be sure to identify safety measures to protect the
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
3
ENH213-6
For European countries only
EC Declaration of Conformity
We Makita Corporation as the responsible
manufacturer declare that the following Makita
machine(s):
Designation of Machine: Demolition Hammer
Model No./ Type: HM1213C, HM1203C
Specifications: see "SPECIFICATIONS" table.
are of series production and
Conforms to the following European Directives:
2000/14/EC, 2006/42/EC
And are manufactured in accordance with the following
standards or standardised documents:
EN60745
The technical documentation is kept by our authorised
representative in Europe who is:
Makita International Europe Ltd.
Michigan Drive, Tongwell,
Milton Keynes, Bucks MK15 8JD, England
The conformity assessment procedure required by
Directive 2000/14/EC was in Accordance with annex VIII.
Notified Body:
TÜV Rheinland LGA Products GmbH
Tillystraße 2
D-90431 Nürnberg
Identification number 0197
Model HM1213C
Measured Sound Power Level: 95dB (A)
Guaranteed Sound Power Level: 97dB (A)
Model HM1203C
Measured Sound Power Level: 95dB (A)
Guaranteed Sound Power Level: 98dB (A)
10.8.2010
000230
Tomoyasu Kato
Director
Makita Corporation
3-11-8, Sumiyoshi-cho,
Anjo, Aichi, 446-8502, JAPAN
GEA005-3
General Power Tool Safety
Warnings
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and
instructions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
4. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets will
reduce risk of electric shock.
5. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
6. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
7. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords
increase the risk of electric shock.
8. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
9. If operating a power tool in a damp location is
unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
10. Use of power supply via a RCD with a rated
residual current of 30mA or less is always
recommended.

Especificaciones del producto

Marca: Makita
Categoría: taladradora
Modelo: HM1203C

¿Necesitas ayuda?

Si necesitas ayuda con Makita HM1203C haz una pregunta a continuación y otros usuarios te responderán


taladradora Makita Manuales

Makita

Makita HP2070 Manual de Usario

13 Octubre 2024
Makita

Makita DHR263ZJ Manual de Usario

12 Octubre 2024
Makita

Makita HP332D Manual de Usario

8 Octubre 2024
Makita

Makita DDA350RFJ Manual de Usario

7 Octubre 2024
Makita

Makita M6501 Manual de Usario

6 Octubre 2024
Makita

Makita DDF485RTJ Manual de Usario

6 Octubre 2024
Makita

Makita DTL061RMJ Manual de Usario

4 Octubre 2024
Makita

Makita DDF453SFE Manual de Usario

2 Octubre 2024
Makita

Makita 8434DWFE Manual de Usario

1 Octubre 2024
Makita

Makita DHP456SHE Manual de Usario

30 Septiembre 2024

taladradora Manuales

Últimos taladradora Manuales

Bavaria

Bavaria BCD 12/1 Manual de Usario

27 Octubre 2024
Bosch

Bosch GSR 120-LI Professional Manual de Usario

24 Octubre 2024
Bosch

Bosch gsr 18 2 li Manual de Usario

23 Octubre 2024
Vonroc

Vonroc CD510DC Manual de Usario

21 Octubre 2024
Einhell

Einhell TC-CD 18/35 Li Manual de Usario

19 Octubre 2024
Einhell

Einhell Herocco Solo Manual de Usario

19 Octubre 2024
DeWalt

DeWalt dc987ka Manual de Usario

19 Octubre 2024
AEG

AEG KH 28 Super XE Manual de Usario

18 Octubre 2024
MSW

MSW -DDM255 Manual de Usario

16 Octubre 2024
MSW

MSW -DDM152 Manual de Usario

16 Octubre 2024