Makita HR3210C Manual de Usario

Makita taladradora HR3210C

Lee a continuación 📖 el manual en español para Makita HR3210C (12 páginas) en la categoría taladradora. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/12

ENGLISH (Original instructions)

INSTRUCTION MANUAL

DOUBLE INSULATION

IMPORTANT: Read Before Using.

Rotary Hammer

HR3200C

HR3210C

HR3210FCT

008536

ENGLISH (Original instructions)

SPECIFICATIONS

Model HR3200C HR3210C HR3210FCT

Tungsten-carbide tipped bit 32 mm

Concrete Core bit 90 mm

Steel 13 mm

Capacities

Wood 32 mm

No load speed (min-1) 315 - 630

Blows per minute 1,650 - 3,300

Overall length 398 mm 424 mm

Net weight 4.8 kg 5.2 kg 5.4 kg

Safety class /II

• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.

• Specifications may differ from country to country.

• Weight according to EPTA-Procedure 01/2003

END201-5

Symbols

The following show the symbols used for the equipment.

Be sure that you understand their meaning before use.

･ Read instruction manual.

･ DOUBLE INSULATION

･ Only for EU countries

Do not dispose of electric equipment

together with household waste material!

In observance of European Directive

2002/96/EC on waste electric and

electronic equipment and its

implementation in accordance with

national law, electric equipment that

have reached the end of their life must

be collected separately and returned to

an environmentally compatible recycling

facility.

ENE044-1

Intended use

The tool is intended for hammer drilling in brick, concrete

and stone as well as for chiselling work.

ENF002-1

Power supply

The tool should be connected only to a power supply of

the same voltage as indicated on the nameplate, and can

only be operated on single-phase AC supply. They are

double-insulated in accordance with European Standard

and can, therefore, also be used from sockets without

earth wire.

ENG905-1

Noise

The typical A-weighted noise level determined according

to EN60745:

Model HR3200C,HR3210C

Sound pressure level (L

pA) : 89 dB(A)

Sound power level (L

WA) : 100 dB(A)

Uncertainty (K) : 3 dB(A)

Model HR3210FCT

Sound pressure level (L

pA) : 88 dB(A)

Sound power level (L

WA) : 99 dB(A)

Uncertainty (K) : 3 dB(A)

Wear ear protection

ENG900-1

Vibration

The vibration total value (tri-axial vector sum) determined

according to EN60745:

Model HR3200C

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 18.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiseling

Vibration emission (ah,CHeq) : 12.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s

2 or less

Uncertainty (K) : 1.5 m/s2

Model HR3210C

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 10.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiseling

Vibration emission (ah,CHeq) : 7.5 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

Model HR3210FCT

Work mode : hammer drilling into concrete

Vibration emission (ah,HD) : 10.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode : chiseling

Vibration emission (ah,CHeq) : 8.0 m/s2

Uncertainty (K) : 1.5 m/s2

Work mode: drilling into metal

Vibration emission (ah,D) : 2.5 m/s2 or less

Uncertainty (K) : 1.5 m/s2

ENG901-1

• The declared vibration emission value has been

measured in accordance with the standard test

method and may be used for comparing one tool

with another.

• The declared vibration emission value may also be

used in a preliminary assessment of exposure.

WARNING:

• The vibration emission during actual use of the

power tool can differ from the declared emission

value depending on the ways in which the tool is

used.

• Be sure to identify safety measures to protect the

operator that are based on an estimation of

exposure in the actual conditions of use (taking

account of all parts of the operating cycle such as

the times when the tool is switched off and when it

is running idle in addition to the trigger time).

ENH101-14

For European countries only

EC Declaration of Conformity

We Makita Corporation as the responsible

manufacturer declare that the following Makita

machine(s):

Designation of Machine:

Rotary Hammer

Model No./ Type: HR3200C,HR3210C,HR3210FCT

are of series production and

Conforms to the following European Directives:

2006/42/EC

And are manufactured in accordance with the following

standards or standardised documents:

EN60745

The technical documentation is kept by our authorised

representative in Europe who is:

Makita International Europe Ltd.

Michigan Drive, Tongwell,

Milton Keynes, MK15 8JD, England

30.1.2009

000230

Tomoyasu Kato

Director

Makita Corporation

3-11-8, Sumiyoshi-cho,

Anjo, Aichi, JAPAN

GEA005-3

General Power Tool Safety

Warnings

WARNING Read all safety warnings and all

instructions. Failure to follow the warnings and

instructions may result in electric shock, fire and/or

serious injury.

Save all warnings and

instructions for future reference.

The term "power tool" in the warnings refers to your

mains-operated (corded) power tool or battery-operated

(cordless) power tool.

Work area safety

1. Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

2. Do not operate power tools in explosive

atmospheres, such as in the presence of

flammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

3. Keep children and bystanders away while

operating a power tool. Distractions can cause

you to lose control.

Electrical safety

4. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any

adapter plugs with earthed (grounded) power

tools. Unmodified plugs and matching outlets will

reduce risk of electric shock.

5. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators. There is an increased risk of

electric shock if your body is earthed or grounded.

6. Do not expose power tools to rain or wet

conditions. Water entering a power tool will

increase the risk of electric shock.

Especificaciones del producto

Marca:	Makita
Categoría:	taladradora
Modelo:	HR3210C
Color del producto:	Zwart
Peso.:	150 g
Ancho:	50 mm
Profundidad:	27 mm
Altura:	15 mm
Amable:	AV-receiver
Tecnología de conectividad:	Bedraad
Modos de vídeo compatibles:	1080p
Certificación:	CE, FCC
HDCP:	Ja