Makita TD001GD103 Manual de Usario

Makita maquina de atornillar TD001GD103

Lee a continuación 📖 el manual en español para Makita TD001GD103 (20 páginas) en la categoría maquina de atornillar. Esta guía fue útil para 3 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/20
INSTRUCTION MANUAL
Cordless Impact Driver
TD001G
ENGLISH: Original instructions
IMPORTANT: Read Before Using.
2 ENGLISH
SPECIFICATIONS
Model: TD001G
Fastening capacities Machine screw 4 mm - 8 mm
Standard bolt 5 mm - 16 mm
High tensile bolt 5 mm - 14 mm
No load speed (RPM) 4 (Max impact mode) 0 - 3,700 min
-1
3 (Hard impact mode) 0 - 3,200 min
-1
2 (Medium impact mode) 0 - 2,100 min
-1
1 (Soft impact mode) 0 - 1,100 min
-1
Wood mode 0 - 1,800 min-1
T mode (1) 0 - 2,400 min-1
T mode (2) 0 - 3,700 min-1
Bolt mode (1) 0 - 2,500 min-1
Bolt mode (2) 0 - 3,700 min-1
Bolt mode (3) 0 - 3,700 min-1
Impacts per minute 4 (Max impact mode) 0 - 4,400 min
-1
3 (Hard impact mode) 0 - 3,600 min
-1
2 (Medium impact mode) 0 - 2,600 min
-1
1 (Soft impact mode) 0 - 1,100 min
-1
Wood mode 0 - 4,400 min-1
T mode (1) -
T mode (2) 0 - 2,600 min-1
Bolt mode (1) -
Bolt mode (2) 0 - 4,400 min-1
Bolt mode (3) 0 - 4,400 min-1
Rated voltage D.C. 36 V - 40 V max
Overall length 120 mm
Net weight 1.7 - 2.0 kg
•
Due to our continuing program of research and development, the specications herein are subject to change without notice.
• Specications may dier from country to country.
• The weight may dier depending on the attachment(s), including the battery cartridge. The lightest and heavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4025 / BL4040
Charger DC40RA
• Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
and chargers may cause injury and/or re.
Symbols
The followings show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Ni-MH
Li-ion
Only for EU countries
Do not dispose of electric equipment or
battery pack together with household waste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteries and battery pack(s) that have
reached the end of their life must be col-
lected separately and returned to an envi-
ronmentally compatible recycling facility.
3 ENGLISH
Intended use
The tool is intended for screw driving in wood, metal
and plastic.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-2-2:
Sound pressure level (L
pA) : 96 dB(A)
Sound power level (L
WA) : 107 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual
use of the power tool can dier from the declared
value(s) depending on the ways in which the
tool is used especially what kind of workpiece is
processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-2:
Work mode: impact tightening of fasteners of the maxi-
mum capacity of the tool
Vibration emission (a
h) : 10.0 m/s2
Uncertainty (K) : 1.5 m/s
2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
and may be used for comparing one tool with another.
NOTE: The declared vibration total value(s) may also
be used in a preliminary assessment of exposure.
WARNING: The vibration emission during
actual use of the power tool can dier from the
declared value(s) depending on the ways in which
the tool is used especially what kind of workpiece
is processed.
WARNING: Be sure to identify safety mea-
sures to protect the operator that are based on an
estimation of exposure in the actual conditions of
use (taking account of all parts of the operating
cycle such as the times when the tool is switched
o and when it is running idle in addition to the
trigger time).
EC Declaration of Conformity
For European countries only
The EC declaration of conformity is included as Annex A
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING:
Read all safety warnings, instruc-
tions, illustrations and specications provided with this
power tool. Failure to follow all instructions listed below
may result in electric shock, re and/or serious injury.
Save all warnings and instruc-
tions for future reference.
The term "power tool" in the warnings refers to your
mains-operated (corded) power tool or battery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tric shock if your body is earthed or grounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an exten-
sion cord suitable for outdoor use. Use of a cord suit-
able for outdoor use reduces the risk of electric shock.
6.
If operating a power tool in a damp location is unavoid-
able, use a residual current device (RCD) protected
supply. Use of an RCD reduces the risk of electric shock.
7. Power tools can produce electromagnetic
elds (EMF) that are not harmful to the user.
However, users of pacemakers and other similar
medical devices should contact the maker of their
device and/or doctor for advice before operating
this power tool.

Especificaciones del producto

Marca: Makita
Categoría: maquina de atornillar
Modelo: TD001GD103

¿Necesitas ayuda?

Si necesitas ayuda con Makita TD001GD103 haz una pregunta a continuación y otros usuarios te responderán


maquina de atornillar Makita Manuales

Makita

Makita DHP448 Manual de Usario

12 Octubre 2024
Makita

Makita 6906J Manual de Usario

5 Octubre 2024
Makita

Makita DTW300Z Manual de Usario

4 Octubre 2024
Makita

Makita DA3000V Manual de Usario

4 Octubre 2024
Makita

Makita DTW180RTJ Manual de Usario

2 Octubre 2024
Makita

Makita DTWA190Z Manual de Usario

2 Octubre 2024
Makita

Makita 6952 Manual de Usario

1 Octubre 2024
Makita

Makita TD090D Manual de Usario

27 Septiembre 2024
Makita

Makita BDF445RHE Manual de Usario

24 Septiembre 2024
Makita

Makita TW001GD202 Manual de Usario

24 Septiembre 2024

maquina de atornillar Manuales

Últimos maquina de atornillar Manuales

Bosch

Bosch GSB 12-2 Professional Manual de Usario

24 Octubre 2024
MSW

MSW -ACW700 Manual de Usario

20 Octubre 2024
Einhell

Einhell CC-IW 450 Manual de Usario

17 Octubre 2024
Metabo

Metabo SSW 650 Manual de Usario

17 Octubre 2024
Metabo

Metabo SSW 18 LT Manual de Usario

15 Octubre 2024
Black And Decker

Black And Decker HP9012 Manual de Usario

10 Octubre 2024
Milwaukee

Milwaukee 2769-20 Manual de Usario

7 Octubre 2024
Bosch

Bosch GSB 18V-65 Professional Manual de Usario

5 Octubre 2024
DeWalt

DeWalt DW132 Manual de Usario

5 Octubre 2024
Bosch

Bosch GDX 18V-285 Professional Manual de Usario

4 Octubre 2024