Makita TW004GZ Manual de Usario

Makita maquina de atornillar TW004GZ

Lee a continuación 📖 el manual en español para Makita TW004GZ (16 páginas) en la categoría maquina de atornillar. Esta guía fue útil para 12 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF
Página 1/16
INSTRUCTION MANUAL
Cordless Impact Wrench
TW004G
TW005G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: TW004G TW005G
Fastening capacities Standard bolt M10 - M20
High tensile bolt M10 - M16
Square drive 12.7 mm
No load speed (RPM) Max impact mode 0 - 3,200 min
-1
Hard impact mode 0 - 2,600 min
-1
Medium impact mode 0 - 1,800 min
-1
Soft impact mode 0 - 1,000 min
-1
Impacts per minute Max impact mode 0 - 4,000 min
-1
Hard impact mode 0 - 3,400 min
-1
Medium impact mode 0 - 2,600 min
-1
Soft impact mode 0 - 1,800 min
-1
Overall length 144 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 1.9 - 2.2 kg
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydierfromcountrytocountry.
• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Batterycartridge BL4025 / BL4040
Charger DC40RA
• Someofthebatterycartridgesandchargerslistedabovemaynotbeavailabledependingonyourregionof
residence.
WARNING: Only use the battery cartridges and chargers listed above.Useofanyotherbatterycartridges
andchargersmaycauseinjuryand/orre.
Symbols
Thefollowingsshowthesymbolswhichmaybeused
fortheequipment.Besurethatyouunderstandtheir
meaning before use.
Read instruction manual.
Ni-MH
Li-ion
OnlyforEUcountries
Do not dispose of electric equipment or
batterypacktogetherwithhouseholdwaste
material!
In observance of the European Directives,
on Waste Electric and Electronic
Equipment and Batteries and Accumulators
and Waste Batteries and Accumulators
and their implementation in accordance
with national laws, electric equipment and
batteriesandbatterypack(s)thathave
reached the end of their life must be col-
lectedseparatelyandreturnedtoanenvi-
ronmentallycompatiblerecyclingfacility.
Intended use
The tool is intended for fastening bolts and nuts.
Noise
ThetypicalA-weightednoiseleveldeterminedaccord-
ing to EN62841-2-2:
Model TW004G
Sound pressure level (L
pA) : 99 dB(A)
Sound power level (L
WA) : 110 dB (A)
Uncertainty(K):3dB(A)
Model TW005G
Sound pressure level (L
pA) : 99 dB(A)
Sound power level (L
WA) : 110 dB (A)
Uncertainty(K):3dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
methodandmaybeusedforcomparingonetoolwith
another.
NOTE: The declared noise emission value(s)
mayalsobeusedinapreliminaryassessmentof
exposure.
3 ENGLISH
WARNING: Wear ear protection.
WARNING:
The noise emission during actual
use of the power tool can dier from the declared
value(s) depending on the ways in which the tool is
used especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched o and when
it is running idle in addition to the trigger time).
Vibration
The vibration total value (tri-axial vector sum) deter-
mined according to EN62841-2-2:
Model TW004G
Work mode: impact tightening of fasteners of the maxi-
mumcapacityofthetool
Vibration emission (a
h) : 16.5 m/s2
Uncertainty(K):1.5m/s
2
Model TW005G
Work mode: impact tightening of fasteners of the maxi-
mumcapacityofthetool
Vibration emission (a
h) : 16.5 m/s2
Uncertainty(K):1.5m/s
2
NOTE: The declared vibration total value(s) has been
measured in accordance with a standard test method
andmaybeusedforcomparingonetoolwithanother.
NOTE:Thedeclaredvibrationtotalvalue(s)mayalso
beusedinapreliminaryassessmentofexposure.
WARNING:
The vibration emission during actual
use of the power tool can dier from the declared val-
ue(s) depending on the ways in which the tool is used
especially what kind of workpiece is processed.
WARNING:
Be sure to identify safety measures
to protect the operator that are based on an estima-
tion of exposure in the actual conditions of use (tak-
ing account of all parts of the operating cycle such
as the times when the tool is switched o and when
it is running idle in addition to the trigger time).
EC Declaration of Conformity
For European countries only
TheECdeclarationofconformityisincludedasAnnexA
to this instruction manual.
SAFETY WARNINGS
General power tool safety warnings
WARNING: Read all safety warnings, instruc-
tions, illustrations and specications provided
with this power tool. Failure to follow all instructions
listedbelowmayresultinelectricshock,reand/or
seriousinjury.
Save all warnings and instruc-
tions for future reference.
Theterm"powertool"inthewarningsreferstoyour
mains-operated(corded)powertoolorbattery-operated
(cordless) power tool.
Work area safety
1. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
2. Do not operate power tools in explosive atmo-
spheres, such as in the presence of ammable
liquids, gases or dust. Power tools create sparks
whichmayignitethedustorfumes.
3. Keep children and bystanders away while
operating a power tool. Distractions can cause
youtolosecontrol.
Electrical safety
1. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodiedplugsandmatchingoutletswill
reduce risk of electric shock.
2. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-
tricshockifyourbodyisearthedorgrounded.
3. Do not expose power tools to rain or wet con-
ditions. Water entering a power tool will increase
the risk of electric shock.
4. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
5.
When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
6. If operating a power tool in a damp location
is unavoidable, use a residual current device
(RCD) protected supply. Use of an RCD reduces
the risk of electric shock.
7.
Power tools can produce electromagnetic elds
(EMF) that are not harmful to the user. However,
users of pacemakers and other similar medical
devices should contact the maker of their device and/
or doctor for advice before operating this power tool.
Personal safety
1. Stay alert, watch what you are doing and use
common sense when operating a power tool.
Do not use a power tool while you are tired or
under the inuence of drugs, alcohol or med-
ication. A moment of inattention while operating
powertoolsmayresultinseriouspersonalinjury.
2. Use personal protective equipment. Always
wear eye protection. Protective equipment such
asadustmask,non-skidsafetyshoes,hardhator
hearing protection used for appropriate conditions
willreducepersonalinjuries.
3. Prevent unintentional starting. Ensure the
switch is in the o-position before connecting
to power source and/or battery pack, picking
up or carrying the tool.Carryingpowertoolswith
yourngerontheswitchorenergisingpowertools
that have the switch on invites accidents.

Especificaciones del producto

Marca: Makita
Categoría: maquina de atornillar
Modelo: TW004GZ

¿Necesitas ayuda?

Si necesitas ayuda con Makita TW004GZ haz una pregunta a continuación y otros usuarios te responderán


maquina de atornillar Makita Manuales

Makita

Makita DHP448 Manual de Usario

12 Octubre 2024
Makita

Makita 6906J Manual de Usario

5 Octubre 2024
Makita

Makita DTW300Z Manual de Usario

4 Octubre 2024
Makita

Makita DA3000V Manual de Usario

4 Octubre 2024
Makita

Makita DTW180RTJ Manual de Usario

2 Octubre 2024
Makita

Makita DTWA190Z Manual de Usario

2 Octubre 2024
Makita

Makita 6952 Manual de Usario

1 Octubre 2024
Makita

Makita TD090D Manual de Usario

27 Septiembre 2024
Makita

Makita BDF445RHE Manual de Usario

24 Septiembre 2024
Makita

Makita TW001GD202 Manual de Usario

24 Septiembre 2024

maquina de atornillar Manuales

Últimos maquina de atornillar Manuales

Bosch

Bosch GSB 12-2 Professional Manual de Usario

24 Octubre 2024
MSW

MSW -ACW700 Manual de Usario

20 Octubre 2024
Einhell

Einhell CC-IW 450 Manual de Usario

17 Octubre 2024
Metabo

Metabo SSW 650 Manual de Usario

17 Octubre 2024
Metabo

Metabo SSW 18 LT Manual de Usario

15 Octubre 2024
Black And Decker

Black And Decker HP9012 Manual de Usario

10 Octubre 2024
Milwaukee

Milwaukee 2769-20 Manual de Usario

7 Octubre 2024
Bosch

Bosch GSB 18V-65 Professional Manual de Usario

5 Octubre 2024
DeWalt

DeWalt DW132 Manual de Usario

5 Octubre 2024
Bosch

Bosch GDX 18V-285 Professional Manual de Usario

4 Octubre 2024