Makita UC014G Manual de Usario

Lee a continuación 📖 el manual en español para Makita UC014G (24 páginas) en la categoría No categorizado. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/24
INSTRUCTION MANUAL
Cordless Chain Saw
UC014G
UC015G
UC016G
UC017G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: UC014G UC015G UC016G UC017G
Overall length
(without guide bar)
445 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 4.5 kg*1
*2 6.2 - 6.9 kg
Standard guide bar length 300 mm 350 mm 400 mm 450 mm
Recommended guide bar length 300 - 450 mm
Applicable saw chain type
(refer to the table below)
91PX
80TXL
Sprocket
(91PX)
Number of teeth 6
Pitch 3/8″
Sprocket
(80TXL)
Number of teeth 7
Pitch 0.325″
Chain speed 0 - 25.5 m/s
(0 - 1,530 m/min)
Chain oil tank volume 260 cm
3
Protection degree IPX4
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydi󰀨erfromcountrytocountry.
*1: Weight, without the saw chain, guide bar, guide bar cover, oil and battery cartridge(s).
*2:Thelightestandheaviestcombinationofweight,accordingtoEPTA-Procedure01/2014.Theweightmaydi󰀨er
depending on the attachment(s), including the battery cartridge(s).
Saw chain, guide bar, and sprocket combination
Saw chain type 91PX
Number of drive links 46 52 56 62
Guide bar Guide bar length 300 mm 350 mm 400 mm 450 mm
Cutting length 268 mm 324 mm 361 mm 418 mm
Pitch 3/8″
Gauge 1.3 mm
Type Sprocket nose bar
Sprocket Number of teeth 6
Pitch 3/8″
Saw chain type 80TXL
Number of drive links 51 59 64 70
Guide bar Guide bar length 300 mm 350 mm 400 mm 450 mm
Cutting length 259 mm 325 mm 366 mm 416 mm
Pitch 0.325″
Gauge 1.1 mm
Type Sprocket nose bar
Sprocket Number of teeth 7
Pitch 0.325″
WARNING:Useappropriatecombinationoftheguidebarandsawchain.Otherwisepersonalinjurymay
result.
3 ENGLISH
Applicable battery cartridge and charger
Battery cartridge BL4040 / BL4050F*
* : Recommended battery
Charger DC40RA / DC40RB / DC40RC
Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
andchargersmaycauseinjuryand/orre.
Recommended cord connected power source
Portable power pack PDC01
The cord connected power source(s) listed above may not be available depending on your region of residence.
Before using the cord connected power source, read instruction and cautionary markings on them.
Symbols
The followings show the symbols which may be used for the equip-
ment. Be sure that you understand their meaning before use.
Read instruction manual.
Wear safety glasses.
Wear ear protection.
Wear a helmet, goggles and ear protection.
Maximum permissible cut length
Always use two hands when operating the
chain saw.
Beware of chain saw kickback and avoid
contact with bar tip.
Direction of chain travel
Sawchainoiladjustment
Ni-MH
Li-ion
Only for EU countries
Due to the presence of hazardous com-
ponents in the equipment, waste electrical
and electronic equipment, accumulators
and batteries may have a negative impact
on the environment and human health.
Do not dispose of electrical and electronic
appliances or batteries with household waste!
In accordance with the European Directive
on waste electrical and electronic equipment
and on accumulators and batteries and waste
accumulators and batteries, as well as their
adaptation to national law, waste electrical
equipment, batteries and accumulators
should be stored separately and delivered
to a separate collection point for municipal
waste, operating in accordance with the
regulations on environmental protection.
This is indicated by the symbol of the crossed-
out wheeled bin placed on the equipment.
Guaranteed sound power level according
to EU Outdoor Noise Directive.
Sound power level according to Australia
NSW Noise Control Regulation.
Intended use
This chain saw is intended for sawing wood.
Noise
The typical A-weighted noise level determined accord-
ing to EN62841-4-1:
Model UC014G
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (L
WA) : 102 dB (A)
Uncertainty (K) : 3 dB(A)
Model UC015G
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (L
WA) : 102 dB (A)
Uncertainty (K) : 3 dB(A)
Model UC016G
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (L
WA) : 102 dB (A)
Uncertainty (K) : 3 dB(A)
Model UC017G
Sound pressure level (L
pA) : 91 dB(A)
Sound power level (L
WA) : 102 dB (A)
Uncertainty (K) : 3 dB(A)
NOTE: The declared noise emission value(s) has
been measured in accordance with a standard test
method and may be used for comparing one tool with
another.
NOTE: The declared noise emission value(s)
may also be used in a preliminary assessment of
exposure.

Especificaciones del producto

Marca: Makita
Categoría: No categorizado
Modelo: UC014G

¿Necesitas ayuda?

Si necesitas ayuda con Makita UC014G haz una pregunta a continuación y otros usuarios te responderán




No categorizado Makita Manuales

No categorizado Manuales

Últimos No categorizado Manuales