Makita UR006G Manual de Usario

Lee a continuación 📖 el manual en español para Makita UR006G (28 páginas) en la categoría No categorizado. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/28
INSTRUCTION MANUAL
Cordless Grass Trimmer
UR006G
UR007G
ENGLISH: Original instructions
Read before use.
2 ENGLISH
SPECIFICATIONS
Model: UR006G UR007G
Handle type Bike handle Loop handle
No load speed
(at each rotation speed level)
Cutter blade
Plastic blade (305 mm)
3: 0 - 7,000 min-1
2: 0 - 5,500 min-1
1: 0 - 4,600 min-1
Nylon cutting head
Plastic blade (255 mm)
3: 0 - 5,500 min-1
2: 0 - 5,000 min-1
1: 0 - 4,600 min-1
Overall length
(without cutting tool and battery)
1,815 mm
Nylon cord diameter 2.4 mm
Applicable cutting tool and
cutting diameter
2-tooth blade
(P/N 198345-9)
255 mm
3-tooth blade
(P/N 195299-1)
255 mm
4-tooth blade
(P/N 196895-8)
255 mm
Nylon cutting head
(P/N 197993-1)
430 mm
Plastic blade
(P/N 198383-1)
(P/N 199868-0)
255 mm
305 mm
Rated voltage D.C. 36 V - 40 V max
Net weight 5.7 - 6.3 kg 5.3 - 5.9 kg
Protection degree IPX4
• Duetoourcontinuingprogramofresearchanddevelopment,thespecicationshereinaresubjecttochange
without notice.
• Specicationsmaydierfromcountrytocountry.
• Theweightmaydierdependingontheattachment(s),includingthebatterycartridge.Thelightestandheavi-
est combination, according to EPTA-Procedure 01/2014, are shown in the table.
Applicable battery cartridge and charger
Battery cartridge BL4020 / BL4025* / BL4040* / BL4050F*
* : Recommended battery
Charger DC40RA / DC40RB / DC40RC
Some of the battery cartridges and chargers listed above may not be available depending on your region of
residence.
WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridges
andchargersmaycauseinjuryand/orre.
Recommended cord connected power source
Portable power pack PDC01 / PDC1200
The cord connected power source(s) listed above may not be available depending on your region of residence.
Before using the cord connected power source, read instruction and cautionary markings on them.
3 ENGLISH
Noise
Model UR006G
Cutting tool
Sound pressure level (LpA
)
dB(A)
Sound power level (LWA)
dB(A)
Applicable
standard
LpA dB(A) Uncer-
tainty (K)
dB(A)
LWA dB(A) Uncer-
tainty (K)
dB(A)
2-tooth blade 80.8 1.0 95.4 0.8
ISO22868
(ISO11806-1)
4-tooth blade 82.9 0.8 99.2 0.5
ISO22868
(ISO11806-1)
Nylon cutting head 81.7 0.9 92.7 1.6
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 77.0 2.3 88.4 2.4
ISO22868
(ISO11806-1)/
EN50636-2-91
Model UR007G
Cutting tool
Sound pressure level (LpA
)
dB(A)
Sound power level (LWA)
dB(A)
Applicable
standard
LpA dB(A) Uncer-
tainty (K)
dB(A)
LWA dB(A) Uncer-
tainty (K)
dB(A)
2-tooth blade 80.8 1.0 95.4 0.8
ISO22868
(ISO11806-1)
4-tooth blade 82.9 0.8 99.2 0.5
ISO22868
(ISO11806-1)
Nylon cutting head 81.7 0.9 92.7 1.6
ISO22868
(ISO11806-1)/
EN50636-2-91
Plastic blade 77.0 2.3 88.4 2.4
ISO22868
(ISO11806-1)/
EN50636-2-91
Even if the sound pressure level listed above is 80 dB (A) or less, the level under working may exceed 80 dB
(A). Wear ear protection.
NOTE: The declared noise emission value(s) has been measured in accordance with a standard test method and
may be used for comparing one tool with another.
NOTE: The declared noise emission value(s) may also be used in a preliminary assessment of exposure.
WARNING: Wear ear protection.
WARNING: The noise emission during actual use of the power tool can dier from the declared val-
ue(s) depending on the ways in which the tool is used especially what kind of workpiece is processed.
WARNING: Be sure to identify safety measures to protect the operator that are based on an estimation
of exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o and when it is running idle in addition to the trigger time).

Especificaciones del producto

Marca: Makita
Categoría: No categorizado
Modelo: UR006G

¿Necesitas ayuda?

Si necesitas ayuda con Makita UR006G haz una pregunta a continuación y otros usuarios te responderán




No categorizado Makita Manuales

No categorizado Manuales

Últimos No categorizado Manuales