Marquant MPR-86 Manual de Usario

Marquant Radio MPR-86

Lee a continuación 📖 el manual en español para Marquant MPR-86 (20 páginas) en la categoría Radio. Esta guía fue útil para 13 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/20

WARNING

CAUTION

CAUTION!

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE

THIS APPLIANCE TO RAIN OR MOISTURE.

Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous

radiation exposure.

This Compact Disc player is classified as CLASS 1 LASER product.

Invisible laser radiation when open and interlocks defeated. Avoid

exposure to beam.

A CONTROLS

1 VOLUME

2 FUNCTION ( CD/TAPE/RADIO )

3 CD REPEAT

4 CD PROGRAM

5 CD STOP ( )

6 PHONES

7 FM ANTENNA

HANDLE

9 BAND ( AM/FM ST )

DISC COMPARTMENT

11 DIAL SCALE

TUNING

13 CD SKIP + ( )

14 CD PLAY/PAUSE ( )

15 CD SKIP - ( )

16 BATTERY

17 POWER INDICATOR

18 CASSETTE COMPARTMENT

19 LCD DISPLAY

20 TAPE PAUSE ( )

21 TAPE STOP/EJECT ( )

22 TAPE F. FWD ( )

23 TAPE REWIND( )

24 TAPE PLAY ( )

TAPE REC ( )

26 AC IN

Read the Operating Instructions carefully and completely

before operating the unit. Be sure to keep the Operating

Instructions for future reference. All warnings and cautions

in the Operating Instructions and on the unit should be

strictly followed, as well as the safety suggestions below.

Installation

1 Water and moisture - Do not use this unit near water,

such as near a bathtub, washbowl, kitchen sink, laundry

tub, in a wet basement, swimming pool, or the like.

2 Heat - Do not use this unit near sources of heat, including

heating vents, stoves, or other appliances that generate

heat.

3 Mounting surface - Place the unit on a flat, even surface.

4 Ventilation - The unit should be situated with adequate

space around it so that proper heat ventilation is assured.

Allow 10 cm(4 in.) clearance from the rear and the top of

the unit and 5 cm (2 in.) from each side.

- Do not place the unit on a bed, rug, or similar surface

that may block the ventilation openings.

- Do not install the unit in a bookcase, cabinet,

or airtight rack where ventilation may be impeded.

5 Objects and liquid entry - Take care that objects

or liquids do not get inside the unit through the

ventilation openings.

6 Condensation - Moisture may form on the CD Pickup

lens when:

- The unit is moved from a cold spot to a warm spot

- the heating system has just been turned on

- the unit is used in a very humid room

- the unit is cooled by an air conditioner

When this unit has condensation inside, it may not

function normally. Should this occur, leave the unit for

a few hours, then try to operate again.

Electric Power

1 Power sources - Use on batteries or AC house current,

as specified in the Operating Instructions and marked

on the unit.

2 AC power cord

When disconnecting the AC power cord, pull it out by-

the AC power plug. Do not pull the cord itself.

Never handle the AC power plug with wet hands, as-

this could result in fire or shock.

Power cords should be firmly secured to avoid being -

bent, pinched, or walked upon. Pay particular attention

to the cord from the unit to the power socket.

Avoid overloading AC power plugs and extension -

cords. beyond their capacity, as this could result in fire

or shock.

3 When not in use - Unplug the AC power cord from the

AC outlet or remove all the batteries if the unit will not

be used for several months or more. When the cord is

plugged in ,a small amount of current continues to flow

to the unit, even when the power is turned off.

B PRECAUTIONS

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT

MPR-86 PORTABLE CD SYSTEM

OPERATING INSTRUCTION

6 7 8

17 18 19

2520 21 22 23 24

GB-1 GB-2

IMPORTANT

Make sure that f is set to TAPE before connecting

the AC cord or inserting batteries.

Using on batteries

Open the lid of the battery compartment on the rear and

unction

C POWER SUPPLY

The batteries need to be replaced when:

The tape speed slows down, volume decreases, or

sound is distorted during operation.

notes on batteries

Do not mix different types of batteries or old batteries

with new ones.

Never recharge the batteries, apply heat to them or

take them apart.

Remove dead batteries.

If liquid leaks from the batteries, wipe thoroughly to remove.

D MAINTENANCE

To clean the cabinet

Use a soft cloth lightly moistened with mild detergent

solution. Do not use strong solvents such as alcohol.

benzine or thinner.

To clean the heads and tape paths

After every 10 hours of use, clean the Recording heads

and Playback head , the pinch roller and capstan .Use

a cotton swab 5 slightly moistened with cleaning fluid

or denatured alcohol.

Cassette tapes

To prevent accidental erasure, bread off the plastic tabs

on the cassette tape after recording with a screwdriver

or other pointed tool.

To record on the tape again, cover the tab openings with

adhesive tape, etc.

1 Set to CD.

2 OPEN the disc compartment and

the printed side up. The total number

is displayed.

3 Press PLAY/PAUSE to start play.

The number of the track being played is displayed.

4 Turn VOLUME to adjust the sound.

- Stops play.STOP

PLAY/PAUSE - Pauses play. To resume play, press

again.

SKIP-/ - Searches for a particular

point during playback. Keep or pressed and then

release it.

- Skips to the beginning of a track. Press or

repeatedly

function

place a disc with

of tracks

SKIP+

E CD OPERATION

REPEAT

Press REPEAT once- Display the flashed "RPT" symbol:

A single track is played repeatedly. Select a track

with or .

Press REPEAT twice- Display the solid "RPT" symbol:

All tracks are played repeatedly.

PROGRAM

In stop state, press PROGRAM and use skip/search

to select the track. Will be program, press play to

start program play.

NOTE

Do not use irregular shape CDs(example: heart-shaped,

octagonal ones). It may result in malfunctions.

Do not place more than one disc in the disc

compartment.

Do not try to open the disc compartment during play.

Do not touch the lens. Doing so may cause malfunctions.

1 Set function to RADIO.

2 Select a band with BAND.

3 Tune to a station with TUNING.

4 Turn VOLUME to adjust the sound.

For better reception - Extend the AM antenna is inside

the unit.

Position the unit for the best reception.

FM ST

Sets the FM or AM sound, insert a tape, Press rec start

recording.

F TUNER OPERATION

Use Type 1 (normal) tapes only.

PLAYING BACK A TAPE

1 Set to TAPE.

2 Press STOP/EJECT to open the cassette

holder and insert a tape with the exposed side up and

the side to be played facing out.

3 Press PLAY to start play.

4 Turn VOLUME to adjust the sound.

- Stops play.STOP/EJECT

PAUSE - Pauses play. To resume play, press again.

- Fast forwards/rewinds. F FWD/ REW

function

G TAPE OPERATION

RECORDING

Note that recording is done on only one side of the tape.

1 Insert a tape with the side to be recorded facing out.

Wind up the tape to the point where recording starts.

2 Get ready to record from the source.

To record from a CD: set function to CD and start play.

To record from the tuner: set function to RADIO and

tune to a station.

3 Press REC to start recording.

PLAY is pressed simultaneously.

To stop recording, press STOP/EJECT.

To erase a recording, set function to TAPE and start

recording.

To turn off the unit, set function to TAPE.

To listen with the headphones, connect headphones with a stereo mini plug to the PHONES jack.

If an erroneous display or malfunction occurs, disconnect the AC cord and remove all the batteries to turn off the

display. Then turn the power back on.

H GENERAL

Please check the copyright laws relating to recordings from disc, radio or external

tape for the country in which the machine is being used.

Tuner section

Frequency range, FM: 88-108 MHz

AM: 530-1600 KHz

Deck section

Track format- 2 track, 4 channels / Frequency range-

Normal tape / Recording system- DC bias /

Erasing system-Magnet erase / Heads- Recording /

playback head , Erasure head

CD player section

Disc- Compact disc / Scanning method - Non-contact

optical scanner (semiconductor laser)

I SPECIFICATIONS

General

Speaker- 77 mm cone type (2) / Output- Headphones jack

(stereo jack) / Power output - 0.8 W +0.8 W / Power

requirements- DC 9 V using six size C batteries,

AC 230V, 50Hz / Weight - 2.1Kg (excluding batteries) /

Dimensions - 295(W)x153(H)x213(D) mm

Specifications and external appearance are

subject to change without notice.

insert six (size C) batteries, not supplied, with the and

marks correctly aligned. then close the lid.

Disconnect the AC cord from the AC inlet.

GB-3 GB-4

Especificaciones del producto

Marca:	Marquant
Categoría:	Radio
Modelo:	MPR-86
Color del producto:	Roestvrijstaal
Ancho:	873 mm
Profundidad:	513 mm
Peso del embalaje:	9000 g
Ancho del embalaje:	940 mm
Empaquetadura en profundidad:	570 mm
Altura del embalaje:	260 mm
Ancho del compartimento de instalación:	840 mm
Profundidad del compartimento de instalación:	480 mm
tipo de fregadero:	Opbouwwasbak
Fregadero de forma:	Rechthoekig
Material del fregadero:	Roestvrijstaal
Número de lavabos:	1 kommen
Formar el primer fregadero:	Rechthoekig
Dimensiones del primer recipiente (WxL):	710 x 400 mm
Primero viene la profundidad:	210 mm
Kraangat:	Ja
Tamaño del orificio del grifo:	35 mm
Número de orificios para grifos:	1
Encimera:	Nee
Grifo incluido:	Nee
Tamaño del fregadero:	3.5 "