Maytag W10277499 Manual de Usario

Maytag secadora W10277499

Lee a continuación 📖 el manual en español para Maytag W10277499 (16 páginas) en la categoría secadora. Esta guía fue útil para 8 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/16
W10277498A
W10277538A-SP
DRYER DOOR REVERSAL
INSTRUCTIONS
Table of Contents
Para una version de estas instrucciones en español, visite www.Whirlpool.com
DOOR REVERSAL OPTIONS .........................................2
Tools and Parts ........................................................... 2
SQUARED-OFF DOOR REVERSAL
INSTRUCTIONS .............................................................. 2
ROUND DOOR REVERSAL INSTRUCTIONS .................. 5
INSTRUCTIONS POUR
INVERSION DE PORTE
DE SÉCHEUSE
Table des matières
OPTIONS D’INVERSION DE LA PORTE ........................ 8
Outils et pièces ........................................................... 8
INSTRUCTIONS POUR INVERSION
DE PORTE SEMI-CARRÉE ...................................... 8
INSTRUCTIONS POUR INVERSION
DE PORTE ARRONDIE ............................................. 12
2
DOOR REVERSAL OPTIONS
If desired you may change your door to open from the
left instead of the right, using the following directions:
If your door looks like this,
follow the Squared-Off
Dryer Door Instructions
(steps 1-15):
If your door looks like this,
follow the Round Dryer
Door Instructions (steps
16-29):
Remove screws from door hinge
1.
Remove screws from door
2.
Lift out inner door assembly
3.
Detach door from its original location by removing all four screws
from door hinge, as shown.
IMPORTANT: Avoid damaging or scratching door by laying on
a soft cloth in your work space.
Remove all six screws to separate the inner door assembly from
the outer door assembly, as shown.
Lift out inner door assembly and set aside in a safe location.
SQUARED-OFF DOOR
REVERSAL INSTRUCTIONS
TOOLS AND PARTS
Gather the required tools and parts before starting installation.
Tools needed:
Flat-blade screwdriver
Parts supplied:
Bolt hole cover labels (2 small, 1 large)
NOTE: If your dryer already has plastic bolt hole covers, you
may reuse them to complete door reversal, or you may replace
plastic covers with labels provided.
Phillips screwdriver
3
Snap off hinge plate cover and
move to other side of door
4.
Along edge of outer door ring, nd removable plastic hinge plate
cover. Snap out and lock into slot on other side of door.
Rotate window panel
5.
Remove interior section of outer door ring from the frame, rotate
180° and snap back into place.
Remove bolt hole covers
6.
Your dryer will either have plastic strips or labels covering
the bolt hole openings. If you have plastic covers, use a
screwdriver to gently pry off plastic bolt hole covers. If your
bolt holes are covered with labels, gently peel the labels off.
Remove screws from hinge panel
7.
Move hinge to other side and
replace screws
8.
Remove all four screws that hold hinge to door frame,
as shown above.
Place frame in slot on other side of door and reattach, using
screws that were just removed.
Replace bolt hole covers
on other side
9.
Use bolt hole covers to avoid damaging previously used screw
openings on dryer door. If your bolt hole covers are labels,
you will nd replacement labels with parts included with door
reversal kit. Peel replacement labels off paper backing and
press over bolt holes. If you have plastic bolt hole covers, you
may reuse them by snapping them into screw holes, or you may
replace with the provided labels as previously described.

Especificaciones del producto

Marca: Maytag
Categoría: secadora
Modelo: W10277499

¿Necesitas ayuda?

Si necesitas ayuda con Maytag W10277499 haz una pregunta a continuación y otros usuarios te responderán




secadora Maytag Manuales

secadora Manuales

Últimos secadora Manuales