MB Quart ASC116 Manual de Usario

MB Quart Speaker ASC116

Lee a continuación 📖 el manual en español para MB Quart ASC116 (4 páginas) en la categoría Speaker. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/4
WICHTIGE HINWEISE
Beachten Sie bei der Installation und dem Betrieb der Lautsprecher die geltenden gesetzlichen Sicherheitsbestimmungen und
Unfallverhütungsvorschriften.
Schützen Sie die Lautsprecher beim Einbau und Betrieb vor Beschädigung, direktem Spritzwasser und Überlastung.
Um mögliche Kurzschsse zu vermeiden empfehlen wir während der Montage die Minusklemme der Fahrzeugbatterie abzuklemmen,
vergewissern Sie sich aber zuvor, ob dadurch nicht die elektronischen Sicherheitssysteme des Fahrzeuges gesperrt werden.
Berühren Sie keinesfalls die empfindliche Oberfläche der Tieftonmembrane.
Verwenden Sie niemals die Lautsprecherchassis als Schneide- oder Bohrvorlage.
Achten Sie vor der Installation des Lautsprechers darauf, dass beim Einbau hinter der Auflage keine Hindernisse die erforderliche
Einbautiefe beeinträchtigen.
Verwenden Sie nur Zuleitungskabel von guter Qualität und ausreichendem Kabelquerschnitt.
Die Anschlussstecker müssen aus korrosionssicherem Material sein.
Für optimalen Klang ist ein geschlossenes Volumen von mind. 3,0 - 8,0 Liter erforderlich.
MAXXSONICS USA, INC.
1290 Ensell Road
Lake Zurich, Illinois 60047 USA
www.maxxsonics.com
E I N B A U A N L E I T U N G
A S C 1 2 0
INSTALLATION GUIDE
IMPORTANT NOTES
Please observe when installing and using the loudspeakers the prevailing legal safety and accident prevention requirements.
Protect your loudspeakers during installation and use against damage, direct spray water and overloading.
Observe the correct polarity when wiring up the loudspeakers.
Disconnect the minus terminal of the vehicle battery during installation in order to avoid possible short-circuits. But prior to that
please make sure that such a disconnection will not block the electronically car’s safety system.
Please do not touch the delicate surface of the woofer membrane.
Never use the loudspeaker chassis itself as a cutting or drilling template. Please make sure when fitting the loudspeakers
behind fascia panelling that there are no obstacles behind it to prevent the required installation depth.
Use wiring cable of good quality and with an sufficient cable cross-section.
The connection plugs and sockets must be made of corrosion-proof material.
An enclosed volume of at least 3.0 – 8.0 liters is required for the best sound reproduction.
ENG
DISTRIBUTION:
Audio Design GmbH
Am Breilingsweg 3
D-76709 Kronau (Germany)
Tel. +49 (0)7253 - 9465-0
Fax +49 (0)7253 - 946510
www.audiodesign.de
DEU
A R C T I C
A S C 1 1 6
EINBAU
Die Einbaufläche für den Lautsprecher muss eben sein.
Für eine passgenaue Einbauöffnung, nehmen Sie bitte die beiliegende Einbauschablone zu Hilfe.
Die Montage des Lautsprechers muss dicht erfolgen. Es darf keine Feuchtigkeit auf die Rückseite des Lautsprechers gelangen.
Fixieren Sie die selbstklebende Schablone an der nach den genannten Kriterien ausgesuchten Stelle.
Danach schneiden Sie die Einbauöffnung und bohren die Bohrlöcher (Bohrer Ø 2,5 mm).
ACHTUNG: auf die Einbautiefe und Bohrtiefe achten, damit keine wichtigen Teile beschädigt werden) .
Befestigen Sie dann den Lautsprecher mit den beiliegenden nicht rostenden Schrauben nach dem Anschluss (siehe unten).
Die Schrauben bitte gleichmäßig anziehen und nicht überdrehen.
DEU
ANSCHLUSS
Achten Sie beim Anschluss der Lautsprecher auf die korrekte Polarität aller Verbindungen.
Verwenden Sie nur ausreichend dimensionierte Lautsprecherkabel für den Anschluss der Lautsprecher.
Verbinden Sie unter keinen Umständen den Minus-Pol des Lautspecheranschlusses mit dem Masseanschluss der Stromversorgung.
Achten Sie unbedingt auf die korrekte Gesamtimpedanz, die am Verstärker angeschlossen wird.
Beachten Sie beim Anschluss der Lautsprecher auch die Angaben im Benutzerhandbuch des Verstärkers.
4 OHM
60-90 WATT RMS
ASC120
ASC116
+ – +
L R
LAUTSPRECHER-ANSCHLÜSSE
AM VERSTÄRKER
+
+
4 OHM
60-90 WATT RMS
4 OHM
100-140 WATT RMS
+ – +
L R
LAUTSPRECHER-ANSCHLÜSSE
AM VERSTÄRKER
+
+
4 OHM
100-140 WATT RMS
INSTALLATION
The installation surface for the loudspeaker must be level.
For a correct installation opening, use the provided installation template.
The installation of the loudspeakers must be leakproof. Avoid moisture or damp onto the back of the loudspeakers.
Fix the self-adhesive template in the selected suitable position.
NOTE: Oberserve the installation depth and the drilling depth, that no important components will be damaged.
Insert the loudspeaker into the opening and fix it in place using the stainless steel screws supplied after the interconnection (see below).
Tighten the screws carefully and evenly. Do not overtighten.
ENG
A S C 1 1 6 / A S C 1 2 0
INTERCONNECTION
Ensure always correct polarity for all connections during the installation of the loudspeakers.
Please use only appropriate speaker cables for the connection of the loudspeakers.
Never connect the minus-pole of the speaker terminal with the negative ground of the power supply.
Attend by any means the correct total speaker load impedance, which will be connected to the amplifier.
Attend also the informations of your amplifier’s manual while installing the loudspeakers.
4 OHMS
60-90 WATTS RMS
ASC120
ASC116
+ – +
L R
LOUDSPEAKER TERMINALS
OF THE AMPLIFIER
+
+
4 OHMS
60-90 WATTS RMS
4 OHMS
100-140 WATTS RMS
+ – +
L R
LOUDSPEAKER TERMINALS
OF THE AMPLIFIER
+
+
4 OHMS
100-140 WATTS RMS

Especificaciones del producto

Marca: MB Quart
Categoría: Speaker
Modelo: ASC116
Color del producto: Zwart
Peso.: 114 g
Ancho: 52 mm
Profundidad: 11 mm
Altura: 120 mm
Manual de usuario: Ja
Código de seguridad internacional (IP): IP68
Capacidad del acumulador/batería: 1000 mAh
Bluetooth: Ja
Diagonal de la pantalla: 2.2 "
Resolución: 240 x 320 Pixels
Pantalla táctil: Nee
capacidad de RAM: 32 MB
Versión Bluetooth: 3.0+HS
Bandas 2G (SIM principal): 850,900,1800,1900 MHz
factor vorm: Rechthoek
Resolución de la cámara trasera (numérica): 0.3 MP
Puerto USB: Ja
Tipo de conector USB: Micro-USB
Cables suministrados: AC, USB
Tarjetas de memoria compatibles: MicroSD (TransFlash), MicroSDHC
SMS: Ja
MMS: Ja
Gestión de información personal: Alarm clock, Calculator, Calendar
Agenda: Ja
Radio FM: Ja
Bandas 2G (SIM secundaria): 850,900,1800,1900 MHz
versión USB: 2.0
Memoria interna: 8 MB
Formato de imagen soportado: JPEG
Tiempo de conversación (2G): - uur
Cámara frontal: Nee
Red de datos: GSM
capacidad ROM: 32 MB
Cámara trasera: Ja
Reproductor de música: Ja
Tiempo de espera (2G): - uur
Calculadora: Ja
Soporte de tarjeta flash: Ja
Memoria flash: 8 MB
Incluye micrófono: Ja
diccionario T9: Ja
Tecnología de batería: Lithium-Ion (Li-Ion)
Tipo-de-visualización: TFT

¿Necesitas ayuda?

Si necesitas ayuda con MB Quart ASC116 haz una pregunta a continuación y otros usuarios te responderán




Speaker MB Quart Manuales

Speaker Manuales

Últimos Speaker Manuales

OSD Audio

OSD Audio LS2 Manual de Usario

19 Septiembre 2024
Toa

Toa PC-3WR Manual de Usario

19 Septiembre 2024
Toa

Toa TZ-205 Manual de Usario

19 Septiembre 2024
Toa

Toa PC-2668 Manual de Usario

19 Septiembre 2024
Toa

Toa PC-3WR-L Manual de Usario

19 Septiembre 2024
Toa

Toa BS-1120W Manual de Usario

19 Septiembre 2024
Toa

Toa TZ-105 Manual de Usario

19 Septiembre 2024
Toa

Toa BS-1110W Manual de Usario

19 Septiembre 2024
AXESS

AXESS SPBT1031 Manual de Usario

18 Septiembre 2024