McIntosh MP1100 Manual de Usario

Lee a continuación 📖 el manual en español para McIntosh MP1100 (32 páginas) en la categoría receptor. Esta guía fue útil para 10 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Página 1/32
McIntosh Laboratory, Inc. 2 Chambers Street Binghamton, New York 13903-2699 Phone: 607-723-3512 www.mcintoshlabs.com
MP1100
Phono Preamplifier
Owners Manual
2
Copyright 2016 © by McIntosh Laboratory, Inc.
Table of Contents
Customer Service
If it is determined that your McIntosh product is in
need of repair, you can return it to your Dealer. You
can also return it to the McIntosh Laboratory Service
Department. For assistance on factory repair return
procedure, contact the McIntosh Service Department
at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3515
Fax: 607-723-1917
Safety Instructions .....................................................
2
(Separate Sheet) ...................
Important Additional
Operation Information Guide
Thank You and Please Take a Moment 2
......................
Technical Assistance and Customer Service 2
.............
Table of Contents 2
.......................................................
General Information ..................................................
3
Connector and Cable Information .............................
3
Introduction ................................................................
4
Performance Features .............................................
4-5
Dimensions ................................................................
6
Installation .................................................................
7
Connections:
Rear Panel Connections ..............................................
8
Connecting Components .............................................
9
Front Panel:
Front Panel Displays, Controls, Push-buttons ..........
10
Front Panel Information Displays Modes ..................
11
Remote Control:
HR090 Remote Control Push-buttons ......................
12
Setup:
How to Operate the Setup Mode ..............................
13
Default Settings, Firmware Version ..........................
13
Input Settings .......................................................
13-14
Rename Input ............................................................
14
Profile Store ..............................................................
15
Digital Output ...........................................................
16
Tube Lights ...............................................................
16
Power Mode ..............................................................
16 IR Sensor................................................................... 17
Factory Reset ............................................................
17
Operation:
How to Operate the MP1100 ................................
18-23
Trim Functions .....................................................
18-22
Mute, Trim and Output Meters .................................
23
USB Input and Installing Software ......................
24-26
Reset of Microprocessors ..........................................
25
Graphic Curves ....................................................
27-28
Rumble and Scratch Filter Curves ............................
28
Additional Information:
Photo .........................................................................
29
Specifications ............................................................
30
Packing Instruction ...................................................
31
Important Safety Information is supplied in a separate document “Important Additional Operation Information Guide
Your decision to own this McIntosh MP1100 Phono
Preamplifier ranks you at the very top among discrim-
inating music listeners. You now have “The Best.
The McIntosh dedication to “Quality, is assurance
that you will receive many years of musical enjoyment
from this unit.
Please take a short time to read the information in
this manual. We want you to be as familiar as pos-
sible with all the features and functions of your new
McIntosh.
Thank You
Please Take A Moment
Technical Assistance
If at any time you have questions about your McIntosh
product, contact your McIntosh Dealer who is familiar
with your McIntosh equipment and any other brands
that may be part of your system. If you or your Dealer
wish additional help concerning a suspected problem,
you can receive technical assistance for all McIntosh
products at:
McIntosh Laboratory, Inc.
2 Chambers Street
Binghamton, New York 13903
Phone: 607-723-3512
Fax: 607-724-0549
The serial number, purchase date and McIntosh Dealer
name are important to you for possible insurance
claim or future service. The spaces below have been
provided for you to record that information:
Serial Number: _______________________________
Purchase Date: _______________________________
Dealer Name: ________________________________
3
General Information and Connector Information
Connector and Cable Information
XLR Connectors
Below is the Pin configuration for the XLR Balanced
Output Connector on the MP1100. Refer to the dia-
gram for connections:
PIN 1: Shield/Ground
PIN 2: + Output
PIN 3: - Output
Power Control (Trigger) Connectors
When the MP1100 TRIGger IN Connector receives a
Power Control On Signal (5 to 12 volts) it will make
that signal available at the TRIG-
ger OUT Connector to control
other connected McIntosh Com-
ponents. An additional connection
is for controlling the illumination
of the Output Meters on McIntosh
Components. A 3.5mm stereo mini phone plug is used
for connection to the Power Control (Trigger) Connec-
tors on the MP1100.
1. For additional connection information, refer to the
owner’s manual(s) for any component(s) connected
to the MP1100 Phono Preamplifier.
2. The Main AC Power going to the MP1100 and any
other McIntosh Component(s) should not be applied
until all the system components are connected
together. Failure to do so could result in mal-
functioning of some or all of the systems normal
operations. When the MP1100 and other McIntosh
Components are in their Standby Power Off Mode,
the Microprocessor’s Circuitry inside each com-
ponent is active and communication is occurring
between them.
3. The Balanced and Unbalanced Outputs may be
used simultaneously, connected to different Pream-
plifiers or component recording device.
4. The MP1100 internal Analog to Digital Converter
Circuitry is designed to encode 2-channel PCM
(Pulse Code Modulation) Digital Signals. The
Coaxial and Optical Digital Audio Outputs are for
PCM Digital Signals.
5. Sound Intensity is measured in units called Deci-
bels and “dB” is the abbreviation.
6. When discarding the unit, comply with local rules
or regulations. Batteries should never be
thrown away or incinerated but disposed
of in accordance with the local regulations
concerning battery disposal.
7. For additional information on the MP1100
and other McIntosh Products please visit the McIn-
tosh Web Site at www.mcintoshlabs.com.
General Information
Power
Control
Meter
Illumination
Control Ground
PIN 2 PIN 1
PIN 3
PIN 1 PIN 2
PIN 3

Especificaciones del producto

Marca: McIntosh
Categoría: receptor
Modelo: MP1100

¿Necesitas ayuda?

Si necesitas ayuda con McIntosh MP1100 haz una pregunta a continuación y otros usuarios te responderán




receptor McIntosh Manuales

receptor Manuales

Últimos receptor Manuales