Meade Polaris 127mm Manual de Usario

Meade Telescopio Polaris 127mm

Lee a continuación 📖 el manual en español para Meade Polaris 127mm (28 páginas) en la categoría Telescopio. Esta guía fue útil para 7 personas y fue valorada con 4.5 estrellas en promedio por 2 usuarios

Descargar PDF

Página 1/28

MEADE INSTRUCTION MANUAL

Polaris Series German Equatorial Telescopes POLARIS SERIES

www.meade.com

WARNING!

Never use a Meade® Telescope to look at the Sun!

Looking at or near the Sun will cause instant and

irreversible damage to your eye. Eye damage is often

painless, so there is no warning to the observer that

damage has occurred until it is too late. Do not point the

telescope at or near the Sun. Do not look through the

telescope or viewfinder as it is moving. Children should

always have adult supervision while observing.

INTRODUCTION

Your telescope is an excellent beginner’s

instrument, and is designed to observe

objects in the sky. It can be your personal

window to the universe allowing you to see

bright galaxies, planets, stars and more.

The telescope is shipped with the following

parts:

• Optical tube

• German equatorial mount

• Stainless-steel tripod with accessory tray

• Three 1.25” eyepieces:

MA25mm, MA9mm, MA6.3mm

• Red dot viewfinder with bracket

• Slow-motion control cables

• 90 degree erect-image diagonal prism

(Refractors only)

The Polaris Series of telescope includes

optical tubes of different sizes and design.

Some optical tubes use lenses to focus the

incoming light and are called refractors. Other

optical tubes use mirrors to bring the incoming

light to focus and are called reflectors.

The lens or mirror diameter of the telescope

is one of the most important pieces of

information about the telescope. The size of

the lens or mirror, also known as “aperture”,

determines how much detail you will be able

to see in your telescope. The optical tubes

focal length information is also important

and will help later on to calculate the viewing

magnification.

Setting up your telescope involves these

simple steps:

•Setup your tripod

•Attach the accessory tray

•Attach the mount

•Attach the counterweight shaft and

counterweight

•Prepare the mount

•Attach the optical tube to the mount

•Attach the red dot viewfinder

•Attach the eyepiece

Study the picture on the next page(s)

and become acquainted with the parts

of your telescope. Figure 1A shows

a typical reflector telescope whereas

Figure 1B shows a refractor. Then

proceed to “Setup your Tripod.”

Especificaciones del producto

Marca:	Meade
Categoría:	Telescopio
Modelo:	Polaris 127mm
Color del producto:	Black, Stainless steel
Material de la carcasa:	Silicone, Stainless steel
Asa de transporte:	Nee
No contiene:	Bisfenol A / BPA
Contenido:	0.5 l
Incluye tapa:	Ja
presionar el botón:	Ja
Doble pared:	Ja
Manejar:	Nee